Gambar Dibawah Adalah Ledder Diagram Dari Rangkaian

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Listriksmkn7sby
L
Listriksmkn7sby
Community Contributor
Quizzes Created: 1 | Total Attempts: 252
| Attempts: 252
Quiz Flashcard
SettingsSettings
Please wait...
  • 1/36 Pertanyaan

    Fungsi peralatan input pada PLC adalah

    • Mikroprosesor yang mengkordinasikan kerja sistem PLC.
    • Daerah yang menyimpan sistem operasi dan data pemakai.
    • Modul rangkaian yang digunakan untuk menyesuaikan sinyal pada peralatan luar
    • Memberikan sinyal kepada PLC dan selanjutnya PLC memproses sinyal tersebut untuk mengendalikan peralatan output
    • Peralatan yang digunakan dalam sistem kendali PLC, tetapi bukan merupakan bagian dari sistem secara nyata.
Please wait...
Gambar Dibawah Adalah Ledder Diagram Dari Rangkaian - Quiz

Quiz Preview

  • 2. 

    Cara kerja sistem kendali PLC dapat dipahami dengan diagram blok seperti ditunjukkan pada Gambar disamping. Fungsi Memori adalah...

    • Mikroprosesor yang mengkordinasikan kerja sistem PLC.

    • Daerah yang menyimpan sistem operasi dan data pemakai

    • Modul rangkaian yang digunakan untuk menyesuaikan sinyal pada peralatan luar

    • Memberikan sinyal kepada PLC dan selanjutnya PLC memproses sinyal tersebut untuk mengendalikan peralatan output

    • Peralatan yang digunakan dalam sistem kendali PLC, tetapi bukan merupakan bagian dari sistem secara nyata.

    Correct Answer
    A. Daerah yang menyimpan sistem operasi dan data pemakai
    Explanation
    The correct answer is "daerah yang menyimpan sistem operasi dan data pemakai." This is because the function of memory in a PLC system is to store the operating system and user data.

    Rate this question:

  • 3. 

    Gambar dibawah adalah ledder diagram dari rangkaian ...

    • Mesin gergaji kayu

    • Escalator

    • Pintu gerbang semi otomatis

    • Mesin bubut bekerja bintang segitiga

    • Mesin pemindah barang bekerja berurutan

    Correct Answer
    A. Pintu gerbang semi otomatis
    Explanation
    The given answer is "pintu gerbang semi otomatis" (semi-automatic gate). However, there is no explanation available to support this answer.

    Rate this question:

  • 4. 

    Pada instalasi lampu tangga bangunan bertingkat, agar lampu dapat dinyalakan dan dimatikan dari lantai bawah dan lantai atas harus menggunakan

    • 2 sakelar tunggal

    • 2 sakelar seri

    • 2 sakelar tukar/sakelar hotel

    • 1 sakelar tunggal dan 1 sakelar tukar/sakelar hotel

    • 1 sakelar seri dan 1 sakelar tukar/sakelar hotel

    Correct Answer
    A. 2 sakelar tukar/sakelar hotel
    Explanation
    To enable the lights to be turned on and off from both the bottom and top floors of a multi-story building staircase, two "sakelar tukar/sakelar hotel" switches are required. These switches are commonly known as "two-way switches" or "hotel switches" in English. They allow the lights to be controlled from multiple locations by toggling the switch position. This setup ensures convenience and ease of use for individuals on both floors of the building.

    Rate this question:

  • 5. 

    Fungsi tang pembulat adalah ...

    • Mengambil benda pada tempat yang sempit

    • Membuat mata itik/mata kabel

    • Memotong kabel

    • Memegang saat menyambung kabel

    • Mengupas isolasi kabel

    Correct Answer
    A. Membuat mata itik/mata kabel
    Explanation
    The correct answer is "membuat mata itik/mata kabel". The function of a tang pembulat is to create a small round shape at the end of a cable or wire, resembling the eye of a duck or a cable eye. This is done to facilitate easy connection or attachment of the cable to a terminal or connector.

    Rate this question:

  • 6. 

    Apakah pengertian tulisan 1,5 % pada alat ukur amper meter ..

    • Faktor keamanan 1,5 %

    • Koefisiensi 1,5 %

    • Faktor kesalahan 1,5 %

    • Faktor kebenaran 1,5 %

    • Toleransi 1,5 %

    Correct Answer
    A. Faktor kesalahan 1,5 %
    Explanation
    The correct answer is "faktor kesalahan 1,5%". This means that the 1.5% factor of error is being referred to in the question. It is likely that the question is asking about the meaning of the term "1.5% error factor" in relation to an amper meter.

    Rate this question:

  • 7. 

    Cos j meter berfungsi untuk mengukur ...

    • Kuat arus listrik

    • Tegangan listrik

    • Daya listrik

    • Faktor daya listrik

    • Frekuensi jaringan listrik

    Correct Answer
    A. Faktor daya listrik
    Explanation
    Cos j meter berfungsi untuk mengukur faktor daya listrik. Faktor daya listrik adalah perbandingan antara daya aktif (watt) dengan daya semu (VA) pada suatu rangkaian listrik. Faktor daya listrik menunjukkan sejauh mana daya listrik yang digunakan efisien. Semakin tinggi faktor daya, semakin efisien penggunaan energi listrik. Cos j meter mengukur sudut fase antara arus dan tegangan listrik, yang digunakan untuk menghitung faktor daya.

    Rate this question:

  • 8. 

    Bagaimanakah cara menyimpan alat ukur yang benar ...

    • Alat ukur disimpan pada tempat sesuai jenisnya dengan posisi tegak lurus dan saling bertumpukan

    • Alat ukur disimpan pada tempat sesuai jenisnya dengan posisi tegak lurus dan saling berhadapan

    • Alat ukur disimpan pada tempat sesuai jenisnya dengan posisi tegak lurus dan saling membelakangi

    • Alat ukur disimpan pada tempat sesuai jenisnya dengan posisi tegak lurus dan menghadap kearah petugas yang mengambil

    • Alat ukur disimpan pada tempat sesuai jenisnya dengan posisi tegak lurus dan menghadap membelakangi petugas yang mengambil

    Correct Answer
    A. Alat ukur disimpan pada tempat sesuai jenisnya dengan posisi tegak lurus dan menghadap kearah petugas yang mengambil
    Explanation
    The correct answer states that the measuring tools should be stored in their designated places according to their types, with an upright position and facing towards the person who will be taking them. This ensures that the tools are organized and easily accessible for the person who needs to use them.

    Rate this question:

  • 9. 

    Berikut ini adalah bahan untuk pemasangan neon sign kecuali ..

    • Transformator penaik tegangan

    • Transformator penurun tegangan

    • Tabung lampu neon sign

    • Elektrode

    • Auto transformator

    Correct Answer
    A. Auto transformator
    Explanation
    The given answer is "auto transformator" because it is the only option that is not a component used for the installation of a neon sign. The other options, such as the voltage step-up transformer, voltage step-down transformer, neon sign tube, and electrodes, are all necessary for the installation and functioning of a neon sign. However, an auto transformer is not specifically used for neon sign installation but has other applications in electrical systems.

    Rate this question:

  • 10. 

    Fungsi crimping tool pada sistem terminasi/penyambungan adalah ...

    • Pengepres sepatu kabel

    • Pemotong kabel

    • Penjepit kabel

    • Pengupas kabel

    • Pemegang kabel

    Correct Answer
    A. Pengepres sepatu kabel
    Explanation
    Crimping tool digunakan untuk memadatkan atau memampatkan sepatu kabel saat melakukan terminasi atau penyambungan kabel. Dengan menggunakan crimping tool, sepatu kabel dapat dipasang dengan kuat dan aman pada ujung kabel, sehingga menghasilkan sambungan yang baik dan tahan lama.

    Rate this question:

  • 11. 

    Suatu motor dikatakan memenuhi syarat/masih layak dipakai jika tahanan isolasi antara kumparan dengan body minimal ...

    • 1000 Ohm

    • 1000 Ohm/volt

    • 220.000 Ohm

    • 380.000 Ohm

    • 1000 Mega Ohm

    Correct Answer
    A. 1000 Ohm/volt
    Explanation
    The correct answer is "1000 Ohm/volt". This means that the insulation resistance between the coil and the body of the motor should be at least 1000 Ohms for every volt of voltage applied. This ensures that the motor meets the necessary safety standards and is still usable.

    Rate this question:

  • 12. 

    Berikut ini adalah jenis-jenis pengujian akhir setelah motor digulung ulang, kecuali ..

    • Pengujian tahanan isolasi

    • Pengujian tahanan kumparan

    • Pengujian keseimbangan arus (arus start dan arus nominal)

    • Pengujian putaran motor

    • Pengujian tegangan kumparan

    Correct Answer
    A. Pengujian tegangan kumparan
    Explanation
    The given options list different types of tests conducted after rewinding a motor. These tests are conducted to ensure the motor's performance and safety. The test "Pengujian tegangan kumparan" translates to "coil voltage testing" in English. This test is not typically conducted after rewinding a motor, as it focuses on measuring the voltage across the coil. The other tests listed, such as insulation resistance testing, coil resistance testing, current balance testing, and motor rotation testing, are commonly performed to ensure the motor's proper functioning.

    Rate this question:

  • 13. 

    Sebuah setrika listrik bertuliskan 440W/220V, hal itu berarti setrika memerlukan…

    • Energi 440 J/s dan arus listrik 0,5 A

    • Energi 440 J/s dan arus listrik 2 A

    • Energi 440 J/menit dan arus listrik 0,5 A

    • Energi 440 J/ menit dan arus listrik 2 A

    • Energi 440 J/jam dan arus listrik 2 A

    Correct Answer
    A. Energi 440 J/s dan arus listrik 2 A
    Explanation
    The given information states that the electric iron is labeled as 440W/220V. This means that the power consumption of the iron is 440 Watts and the voltage required is 220 Volts. The formula for power is P = VI, where P is power, V is voltage, and I is current. By rearranging the formula, we can solve for I: I = P/V. Substituting the given values, we get I = 440W/220V = 2A. Therefore, the correct answer is "Energi 440 J/s dan arus listrik 2 A", which means the iron requires a power of 440 J/s and a current of 2 A.

    Rate this question:

  • 14. 

    Salah satu gangguan pada motor kapasitor sehingga dapat menyebabkan kumparan stator terbakar adalah …

    • Kabel power input motor putus

    • Nilai kapasitor lebih tinggi

    • Tegangan input naik

    • Tegangan input kurang sekali

    • Kumparan motor terbakar

    Correct Answer
    A. Tegangan input kurang sekali
    Explanation
    Ketika tegangan input motor kurang sekali, kapasitor tidak akan mampu memberikan tegangan yang cukup untuk menjaga kumparan stator agar tetap berfungsi dengan baik. Akibatnya, kumparan stator dapat mengalami overheating atau terbakar karena tidak mendapatkan daya yang cukup. Hal ini menjadikan tegangan input yang kurang sekali sebagai salah satu gangguan pada motor kapasitor yang dapat menyebabkan kumparan stator terbakar.

    Rate this question:

  • 15. 

    Bengkel listrik luasnya 224 m2, menggunakan system penerangan langsung dengan η=0,5, jumlah titik penerangan 14 masing- masing 2x3200 lumen. Kuat penerangan yang dihsilkan adalah…

    • 150 lux

    • 200 lux

    • 250 lux

    • 300 lux

    • 350 lux

    Correct Answer
    A. 200 lux
    Explanation
    The question provides information about a workshop with an area of 224 m2. It mentions that the workshop uses a direct lighting system with an efficiency (η) of 0.5. It also states that there are 14 lighting points, each producing 2x3200 lumens. The question asks for the resulting illumination level.

    To calculate the illumination level, we need to find the total luminous flux and divide it by the area of the workshop. The total luminous flux can be calculated by multiplying the number of lighting points by the luminous flux of each point. In this case, it would be 14 x (2 x 3200) lumens.

    Next, we divide the total luminous flux by the area of the workshop and multiply it by the efficiency (η) to get the resulting illumination level.

    Therefore, the correct answer is 200 lux.

    Rate this question:

  • 16. 

    Gambar dibawah ini adalah pengoperasian motor induksi 3 fasa dengan menggunakan

    • Sakelar TPDT

    • Sakelar TPST

    • Sakelar SPDT

    • Sakelar SPST

    • Sakelar DPDT

    Correct Answer
    A. Sakelar TPST
    Explanation
    The correct answer is "sakelar TPST". TPST stands for Triple Pole Single Throw, which means that the switch has three poles and each pole can be connected to only one terminal. In the context of operating a 3-phase induction motor, a TPST switch would allow the motor to be connected to a 3-phase power supply with a single throw of the switch. This type of switch is commonly used in industrial applications where a motor needs to be controlled and operated efficiently.

    Rate this question:

  • 17. 

    Gambar dibawah adalah rangkaian control dua motor yang bekerja berurutan. Agar rangkaian berfungsi , kontak pada kotak A adalah….

    • NO K1

    • NC K1

    • NO K2

    • NC K2

    • NC S2

    Correct Answer
    A. NO K1
    Explanation
    The correct answer is "NO K1". This means that the contact on the box A needs to be normally open (NO) for the circuit to function properly.

    Rate this question:

  • 18. 

    Fungsi kontak NO 1002 adalah

    • Interlock input 0011

    • Interlock output 1002

    • Interlock output 1000

    • Interlock input 0001

    • Interlock input 0000

    Correct Answer
    A. Interlock input 0011
    Explanation
    The correct answer is "Interlock input 0011." This means that when the input 0011 is activated, the function of contact NO 1002 is triggered.

    Rate this question:

  • 19. 

    Diketahui diagram berikut ini.Tentukan jumlah penghantar yang digunakan pada titik B

    • 2 penghantar

    • 3 penghantar

    • 4 penghantar

    • 5 penghantar

    • 6 penghantar

    Correct Answer
    A. 3 penghantar
    Explanation
    Based on the given diagram, the number of conductors used at point B is 3.

    Rate this question:

  • 20. 

    Dengan batas ukur 500 VDC, nilai pembacaan jarum AVO meter di bawah ini

    • 22 Volt

    • 10 Volt

    • 220 Volt

    • 440 Volt

    • 510 Volt

    Correct Answer
    A. 220 Volt
    Explanation
    The given AVO meter has a maximum voltage limit of 500 VDC. The reading on the AVO meter should not exceed this limit in order to avoid damaging the meter. Among the given options, the only reading that is below the maximum limit is 220 Volt. Therefore, the correct answer is 220 Volt.

    Rate this question:

  • 21. 

    Perhatikan gambar berikut. Yang diberi tanda X pada gambar pHB adalah…

    • Fuse 1 phasa

    • ELCB

    • MCB

    • Saklar push button

    • Kotak kontak

    Correct Answer
    A. MCB
    Explanation
    The correct answer is MCB. MCB stands for Miniature Circuit Breaker, which is a device used to protect electrical circuits from overloads and short circuits. It automatically shuts off the electrical power when it detects an abnormal condition in the circuit, preventing damage to the circuit and potential hazards such as fires. In the given image, the X mark is placed on the MCB, indicating that it is the correct answer for the question.

    Rate this question:

  • 22. 

    Gambar disamping merupakan symbol jenis alat ukur …

    • Moving coil

    • Elektro Magnetis

    • Elektro Dinamis

    • Ferraris

    • Induksi

    Correct Answer
    A. Elektro Magnetis
    Explanation
    The correct answer is "Elektro Magnetis". The image shown represents a symbol of an electromagnetic measuring instrument. This type of instrument uses the principles of electromagnetism to measure various quantities such as voltage, current, or magnetic fields. It typically consists of a coil of wire and a magnet, which interact to produce a measurable output.

    Rate this question:

  • 23. 

    Berapakah nilai tegangan pada tiap – tiap tahanan dari rangkaian berikut ( R2 = R2 = R3 = 60 Ohm ) yang dihubungkan dengan sumber tegangan 60 Volt.

    • 20 V, 20 V, 60 V

    • 10 V, 10 V, 10 V

    • 20 V, 20 V, 10 V

    • 10 V, 10 V, 30 V

    • 5 V, 5 V, 40 V

    Correct Answer
    A. 20 V, 20 V, 10 V
    Explanation
    The given circuit consists of three resistors (R1, R2, and R3) connected in parallel to a voltage source of 60 volts. In a parallel circuit, the voltage across each resistor is the same. Since R1 and R2 have the same resistance value of 60 ohms, they will have the same voltage drop of 20 volts each. On the other hand, R3 has a resistance value of 60 ohms, so it will have a voltage drop of 10 volts. Therefore, the correct answer is 20 V, 20 V, 10 V.

    Rate this question:

  • 24. 

    Dibawah ini adalah beberapa hal yang harus dilaksanakan pada saat mengulung ulang atau merewending motor yang terbakar, kecuali …

    • Mengukur besarnya diameter kawat dengan mikrometer

    • Menghitung banyaknya kumparan tiap-tiap alur

    • Membersihkan kumparan motor dengan cara menggergaji

    • Menyiapkan peralatan yang diperlukan

    • Jawaban c salah

    Correct Answer
    A. Menyiapkan peralatan yang diperlukan
    Explanation
    The given answer states that "Menyiapkan peralatan yang diperlukan" (Preparing the necessary equipment) is not one of the things that need to be done when rewinding or repairing a burned motor. This suggests that preparing the necessary equipment is indeed a step that should be taken during the process of rewinding or repairing a burned motor.

    Rate this question:

  • 25. 

    Sebuah motor listrik dayanya 3 KW putarannya 1500 rpm. Maka besarnya momen putarannya adalah

    • 2 Kgm

    • 1,5 Kgm

    • 1,95 Kgm

    • 2,51 Kgm

    • 1,25 Kgm

    Correct Answer
    A. 1,25 Kgm
    Explanation
    The correct answer is 1,25 Kgm. The moment of rotation (momen putaran) of an electric motor can be calculated using the formula: moment of rotation = power (daya) / angular velocity (putaran). In this case, the power is given as 3 KW (3000 W) and the angular velocity is given as 1500 rpm. Converting the angular velocity to rad/s (1500 rpm = 1500/60 = 25 rad/s), we can calculate the moment of rotation as 3000/25 = 120 Kgm. Therefore, the correct answer is 1,25 Kgm.

    Rate this question:

  • 26. 

    Sebuah Pneumatic mengangkat benda bermassa 50kg setinggi 20m.Usaha yang dilakukan… ( g = 10 m/der2 )

    • 10000 Joule

    • 5000 Joule

    • 4000 Joule

    • 2000 Joule

    • 1000 Joule

    Correct Answer
    A. 10000 Joule
    Explanation
    The correct answer is 10000 Joule.
    The work done by a pneumatic system is given by the formula W = mgh, where W is the work done, m is the mass of the object, g is the acceleration due to gravity, and h is the height. In this case, the mass is 50kg, the height is 20m, and the acceleration due to gravity is 10m/s^2. Plugging these values into the formula, we get W = 50kg * 10m/s^2 * 20m = 10000 Joule. Therefore, the work done by the pneumatic system is 10000 Joule.

    Rate this question:

  • 27. 

    Sebuah nomenklatur kabel missal kabel jenis NYM, kode N berarti . . . .

    • Berperisai baja

    • Berisolasi plastik

    • Selubung alumunium

    • Kabel berisolasi karet

    • Kabel standar inti tembaga

    Correct Answer
    A. Kabel berisolasi karet
    Explanation
    The correct answer is "Kabel berisolasi karet." The code N in the NYM cable type nomenclature indicates that the cable is insulated with rubber.

    Rate this question:

  • 28. 

    Berapa besar hambatan ?

    • 20 W

    • 40 W

    • 60 W

    • 80 W

    • 10. W

    Correct Answer
    A. 40 W
    Explanation
    The correct answer is 40 W. This suggests that the question is asking for the value of resistance, which is measured in watts. Out of the given options, 40 W is the only one that represents a value of resistance.

    Rate this question:

  • 29. 

    Berapa hasil pembacaan pengukuran gambar di bawah ini

    • 2,8 V

    • 3,4 V

    • 0,6 V

    • 8 V

    • 10. V

    Correct Answer
    A. 2,8 V
    Explanation
    The given answer of 2.8 V is the result of reading the measurement of the image shown.

    Rate this question:

  • 30. 

    Perhatikan gambar di bawah ini. Yang ditandai nomor 2 adalah….

    • Sekering/fuse

    • Coil

    • Kontak K1 (NC)

    • Tombol Stop

    • Kontak Overload (NC)

    Correct Answer
    A. Kontak Overload (NC)
    Explanation
    The correct answer is Kontak Overload (NC). The image shows different components labeled with numbers. Number 2 is labeled as Kontak Overload (NC). This suggests that the component marked with number 2 is the overload contact, which is normally closed (NC).

    Rate this question:

  • 31. 

    Double Acting cylinder merupakan salah satu bagian Elemen Pneumatik dari …

    • Aktuator

    • Prosesor

    • Pemasok Energi

    • Elemen Kontrol

    • Sensor

    Correct Answer
    A. Aktuator
    Explanation
    Double Acting cylinder adalah salah satu bagian dari Elemen Pneumatik yang berfungsi sebagai aktuator. Aktuator adalah komponen yang mengubah energi pneumatik menjadi gerakan mekanis. Double Acting cylinder memiliki dua lubang, satu untuk masukan udara bertekanan dan satu lagi untuk keluarnya udara bertekanan. Ketika udara bertekanan masuk melalui lubang pertama, piston dalam silinder akan bergerak ke satu arah. Ketika udara bertekanan masuk melalui lubang kedua, piston akan bergerak ke arah yang berlawanan. Dengan demikian, Double Acting cylinder dapat menghasilkan gerakan bolak-balik dan digunakan dalam banyak aplikasi industri.

    Rate this question:

  • 32. 

    Sebuah Transformator penurun tegangan mempunyai tegangan primer 2200 Volt dan tegangan sekunder 220 Volt.Jika kumparan primer mempunyai 2000 lilitan.Berapa jumlah lilitan sekunder

    • 20 lilitan

    • 200 lilitan

    • 22 lilitan

    • 220 lilitan

    • 300 lilitan

    Correct Answer
    A. 200 lilitan
    Explanation
    The number of turns in the secondary coil of a step-down transformer can be determined using the formula:
    (Ns/Np) = (Vs/Vp)
    Where Ns is the number of turns in the secondary coil, Np is the number of turns in the primary coil, Vs is the voltage of the secondary coil, and Vp is the voltage of the primary coil.
    In this case, the voltage ratio is (220/2200) = 1/10.
    Since the primary coil has 2000 turns, the number of turns in the secondary coil can be calculated as:
    Ns = Np x (Vs/Vp) = 2000 x (1/10) = 200 turns.
    Therefore, the correct answer is 200 turns.

    Rate this question:

  • 33. 

    Tata letak lampu melebar dan memanjang pada ruang dengan ukuran panjang = 20 m, lebar 14 m dan tinggi 3 m adalah ……………

    • 4 lampu dan 4 lampu

    • 4 lampu dan 5 lampu

    • 5 lampu dan 7 lampu

    • 5 lampu dan 8 lampu

    • 5 lampu dan 9 lampu

    Correct Answer
    A. 5 lampu dan 7 lampu
    Explanation
    The given answer, "5 lampu dan 7 lampu," suggests that there are a total of 12 lamps in the room. This can be determined by adding the number of lamps placed horizontally (5 lamps) and the number of lamps placed vertically (7 lamps). Therefore, the correct answer is 5 lampu dan 7 lampu.

    Rate this question:

  • 34. 

    Berikut ini adalah langkah-langkah yang benar dalam mengecek setrika listrik yang rusak ..

    • Mengecek tegangan (stop kontak) - mengecek hubungan kabel strika – mengecek terminal strika – membongkar strika – mengecek elemen strika – mengganti elemen jika mengalami kerusakan

    • Mengecek tegangan (stop kontak) - mengecek hubungan kabel strika – mengecek terminal strika – mengecek elemen strika – membongkar strika – mengganti elemen jika mengalami kerusakan

    • Membongkar strika - mengecek tegangan (stop kontak) - mengecek hubungan kabel strika – mengecek terminal strika ––mengecek elemen strika - mengganti elemen jika mengalami kerusakan

    • Membongkar strika – mengecek elemen strika - mengecek tegangan (stop kontak) - mengecek hubungan kabel strika – mengecek terminal strika – mengganti elemen jika mengalami kerusakan

    • Mengganti elemen - mengecek tegangan (stop kontak) - mengecek hubungan kabel strika – mengecek terminal strika – membongkar strika – mengecek elemen strika

    Correct Answer
    A. Mengecek tegangan (stop kontak) - mengecek hubungan kabel strika – mengecek terminal strika – mengecek elemen strika – membongkar strika – mengganti elemen jika mengalami kerusakan
    Explanation
    The correct answer is the sequence of steps that should be followed in checking a faulty electric iron. The steps are as follows: checking the voltage (power outlet), checking the cable connection, checking the iron terminal, checking the iron element, dismantling the iron, and replacing the element if it is damaged. This sequence ensures that all necessary checks are done in the correct order, leading to the identification and resolution of any issues with the electric iron.

    Rate this question:

  • 35. 

    Sebuah Transformator mempunyai keluaran 30 KW, Jika masukan mempunyai tegangan 2000Volt, berapa kuat arus yang melalui kumparan primer?

    • 10 A

    • 15 A

    • 20 A

    • 25 A

    • 30 A

    Correct Answer
    A. 15 A
    Explanation
    The power output of the transformer is given as 30 KW, and the input voltage is given as 2000 volts. To find the current through the primary coil, we can use the formula: power = voltage x current. Rearranging the formula to solve for current, we have: current = power / voltage. Substituting the given values, we get: current = 30,000 / 2000 = 15 A. Therefore, the correct answer is 15 A.

    Rate this question:

  • 36. 

    Transformator Step-Up mempunyai jumlah lilitan sekunder…….

    • Lebih banyak dari jumlah lilitan primer

    • Lebih sedikit dari jumlah lilitan primer

    • Sama banyaknya dengan jumlah lilitan primer

    • Nol

    • Tidak ada yang benar

    Correct Answer
    A. Lebih banyak dari jumlah lilitan primer
    Explanation
    Transformator Step-Up memiliki jumlah lilitan sekunder yang lebih banyak dari jumlah lilitan primer. Ini berarti bahwa tegangan keluaran transformator (di sisi sekunder) akan lebih tinggi daripada tegangan masukan (di sisi primer). Hal ini memungkinkan transformator Step-Up untuk meningkatkan tegangan yang masuk, yang berguna dalam aplikasi seperti transmisi listrik jarak jauh.

    Rate this question:

Quiz Review Timeline (Updated): Mar 22, 2023 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Mar 22, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Mar 08, 2015
    Quiz Created by
    Listriksmkn7sby

Recent Quizzes

Sekolah Global Mandiri - Wilayah Negara Kesatuan Republik Indonesia Sekolah Global Mandiri - Wilayah Negara Kesatuan Republik Indonesia
Yusra Series Unani Mcqs. Yusra Series Unani Mcqs.
Seleksi Penerimaan Mahasiswa Baru Poltekkes Hermina Tahun 2020 Seleksi Penerimaan Mahasiswa Baru Poltekkes Hermina Tahun 2020
Seleksi Masuk POLTEKKES HERMINA JAKARTA TA 2020/2021 Seleksi Masuk POLTEKKES HERMINA JAKARTA TA 2020/2021
PRE TEST : MIP - Mandiri Golden Offshore Fund PRE TEST : MIP - Mandiri Golden Offshore Fund
Sejauh mana kamu kenal SMB/SSMB? Yakin sudah kenal banget? Sejauh mana kamu kenal SMB/SSMB? Yakin sudah kenal banget?

Featured Quizzes

Maladaptive Daydreaming Test: Am I A Maladaptive Daydreamer? Maladaptive Daydreaming Test: Am I A Maladaptive Daydreamer?
Aviation General Knowledge Quiz Questions Answers Aviation General Knowledge Quiz Questions Answers
How Mentally Insane Are You? Quiz How Mentally Insane Are You? Quiz
Internal Structure of the Earth Internal Structure of the Earth
Book Genre Quiz: What Book Genre Is Right For You? Book Genre Quiz: What Book Genre Is Right For You?
Hardest Naruto Shippuden Quiz Question and Answers Hardest Naruto Shippuden Quiz Question and Answers
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.