2s071 Volume 2 Edition 7

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
Learn about Our Editorial Process
| By Joseph
J
Joseph
Community Contributor
Quizzes Created: 3 | Total Attempts: 553
Questions: 88 | Attempts: 176

SettingsSettingsSettings
2s071 Quizzes & Trivia

Questions and Answers
  • 1. 

    Which mission capable (MICAP) cause code indicates the request was a first demand for the item?

    • A.

      A

    • B.

      B

    • C.

      C

    • D.

      D

    Correct Answer
    A. A
  • 2. 

    Which mission capable (MICAP) cause code indicates past recurring demand or reparable generation experience but Air Force stockage policy precluded establishment of a demand-based stock level?

    • A.

      A

    • B.

      B

    • C.

      C

    • D.

      D

    Correct Answer
    B. B
    Explanation
    MICAP cause code B indicates that there has been past recurring demand or reparable generation experience, but the Air Force stockage policy did not allow for the establishment of a demand-based stock level. This means that even though there has been a history of demand or need for the item, the stock level was not adjusted accordingly due to the stockage policy.

    Rate this question:

  • 3. 

    Which mission capable (MICAP) cause code indicates that Air Force stockage policy permits a demand-based stock level, but an external decision by HQ AFMC has determined that stocking the item at base should be restricted?

    • A.

      A

    • B.

      B

    • C.

      C

    • D.

      D

    Correct Answer
    C. C
    Explanation
    The correct answer is C. This cause code indicates that Air Force stockage policy permits a demand-based stock level, but an external decision by HQ AFMC has determined that stocking the item at base should be restricted.

    Rate this question:

  • 4. 

    What mission capable (MICAP) cause code indicates base decision not to stock the item?

    • A.

      A

    • B.

      B

    • C.

      C

    • D.

      D

    Correct Answer
    D. D
    Explanation
    The correct answer is D. The "D" cause code indicates that the base has made a decision not to stock the item. This means that the base has determined that it does not need to have the item readily available for use.

    Rate this question:

  • 5. 

    Which mission capable (MICAP) cause code indicates the number of recoverable items in need of repair is equal to or greater than the authorized stock level?

    • A.

      F

    • B.

      G

    • C.

      H

    • D.

      J

    Correct Answer
    B. G
    Explanation
    MICAP cause code G indicates that the number of recoverable items in need of repair is equal to or greater than the authorized stock level. This means that there are enough items that require repair to meet or exceed the authorized stock level, indicating a potential shortage in supply.

    Rate this question:

  • 6. 

    Which mission capable (MICAP) cause code indicates stock replenishment requisition exceeds priority group Uniform Materiel Movement and Issue Priority System (UMMIPS) standards?

    • A.

      F

    • B.

      G

    • C.

      H

    • D.

      J

    Correct Answer
    C. H
    Explanation
    The correct answer is H. MICAP cause code H indicates that the stock replenishment requisition exceeds priority group UMMIPS standards. This means that the requisition is of high priority and requires immediate action to ensure that the stock is replenished in a timely manner.

    Rate this question:

  • 7. 

    Which mission capable (MICAP) cause code indicates less-than-full base stock, stock replenishment does not exceed Uniform Materiel Movement and Issue Priority System (UMMIPS) time standards by priority groups, and awaiting part (AWP) assets are on order at time of MICAP?

    • A.

      X

    • B.

      T

    • C.

      S

    • D.

      R

    Correct Answer
    B. T
    Explanation
    The correct answer is T. The T cause code indicates that the mission capable (MICAP) assets have less-than-full base stock, the stock replenishment does not meet the Uniform Materiel Movement and Issue Priority System (UMMIPS) time standards based on priority groups, and there are awaiting part (AWP) assets on order at the time of the MICAP.

    Rate this question:

  • 8. 

    Which mission capable (MICAP) delete code indicates item received from Air Logistics Centers (ALC)?

    • A.

      1

    • B.

      2

    • C.

      3

    • D.

      4

    Correct Answer
    A. 1
    Explanation
    The correct answer is 1. The mission capable (MICAP) delete code 1 indicates that the item has been received from Air Logistics Centers (ALC).

    Rate this question:

  • 9. 

    Which mission capable (MICAP) delete code indicates item satisfied through lateral support?

    • A.

      1

    • B.

      2

    • C.

      3

    • D.

      4

    Correct Answer
    C. 3
    Explanation
    The correct answer is 3. This delete code indicates that the item has been satisfied through lateral support. This means that the item was not able to be fixed or resolved internally, so it was resolved or supported through external means or assistance. This could include support from other units, organizations, or allies.

    Rate this question:

  • 10. 

    Which mission capable (MICAP) delete code indicates request reported in error?

    • A.

      0

    • B.

      7

    • C.

      8

    • D.

      9

    Correct Answer
    D. 9
    Explanation
    The mission capable (MICAP) delete code "9" indicates that the request reported in error. This means that the request for mission capability has been determined to be incorrect or mistaken and should be disregarded.

    Rate this question:

  • 11. 

    Which transaction identification code (TRIC) notification is used to notify the Integrated Maintenance Data System (IMDS) of a change in the due-out status of an item?

    • A.

      DUO.

    • B.

      DFM.

    • C.

      ISU.

    • D.

      1SH.

    Correct Answer
    D. 1SH.
    Explanation
    The transaction identification code (TRIC) notification "1SH" is used to notify the Integrated Maintenance Data System (IMDS) of a change in the due-out status of an item. This code specifically indicates that there has been a change in the status of an item that is currently due-out, meaning it is required for a specific purpose or task.

    Rate this question:

  • 12. 

    Which due-out status code on the transaction identification code (TRIC) 1SH describes a cancellation?

    • A.

      1

    • B.

      2

    • C.

      3

    • D.

      4

    Correct Answer
    A. 1
    Explanation
    The correct answer is 1 because in the given question, it is stated that the due-out status code on the transaction identification code (TRIC) 1SH describes a cancellation. Therefore, the code 1 is the correct answer as it represents a cancellation status.

    Rate this question:

  • 13. 

    Which due-in from maintenance listing is used to monitor awaiting part (AWP) end items?

    • A.

      Q04.

    • B.

      D19.

    • C.

      D20.

    • D.

      D23.

    Correct Answer
    B. D19.
    Explanation
    The due-in from maintenance listing is used to monitor awaiting part (AWP) end items. This means that it keeps track of the items that are currently awaiting the arrival of a specific part needed for maintenance or repair. The correct answer, D19, indicates that this particular listing is the one used for monitoring AWP end items.

    Rate this question:

  • 14. 

    To perform the due-in from maintenance reconciliation, what listing is used?

    • A.

      Q04.

    • B.

      D19.

    • C.

      D20.

    • D.

      D23.

    Correct Answer
    D. D23.
    Explanation
    To perform the due-in from maintenance reconciliation, the listing used is D23.

    Rate this question:

  • 15. 

    Which due-in from maintenance (DIFM) detail record can be updated by the transaction identification code (TRIC) "DFM" input?

    • A.

      Memo and credit.

    • B.

      Firm and credit.

    • C.

      Firm and memo.

    • D.

      Credit only.

    Correct Answer
    C. Firm and memo.
    Explanation
    The transaction identification code (TRIC) "DFM" input can update the firm and memo due-in from maintenance (DIFM) detail record. This means that when the TRIC "DFM" is used, both the firm and memo fields in the DIFM detail record can be modified or updated. The other options, such as memo and credit or credit only, do not specify the ability to update the firm field, making them incorrect.

    Rate this question:

  • 16. 

    Failure to process turnaround (TRN) data in a correct and timely manner results in reduced base stock levels and incomplete reports from which buy, repair, and distribution decisions are made by

    • A.

      HQ AFMC.

    • B.

      Cataloging and Standardization Office (CASO).

    • C.

      Government Services Administration (GSA).

    • D.

      Defense Logistics Agency (DLA).

    Correct Answer
    A. HQ AFMC.
    Explanation
    Failure to process turnaround (TRN) data in a correct and timely manner can lead to reduced base stock levels and incomplete reports. This can have significant consequences for decision-making related to buying, repairing, and distributing resources. In this case, the organization responsible for making these decisions is HQ AFMC. Therefore, if TRN data is not processed correctly and on time, it will directly impact HQ AFMC's ability to make informed decisions and could result in negative outcomes such as inadequate stock levels and incomplete reports.

    Rate this question:

  • 17. 

    Which update is prepared and processed by flight service center (FSC) to update demand data on the item record and repair cycle data on the repair cycle record?

    • A.

      Calibration.

    • B.

      Turnaround

    • C.

      Repair cycle.

    • D.

      Cannibalization.

    Correct Answer
    B. Turnaround
    Explanation
    The correct answer is "Turnaround." Turnaround refers to the process of preparing and processing updates by the flight service center (FSC) to update demand data on the item record and repair cycle data on the repair cycle record. This involves ensuring that the necessary repairs and maintenance are carried out efficiently and promptly to minimize downtime and maximize the availability of the item for use.

    Rate this question:

  • 18. 

    Unserviceable assets are stored in the logistics readiness squadron (LRS) warehouse until when?

    • A.

      Receipt of AFTO Form 350.

    • B.

      Receipt of AF Form 1348–1A.

    • C.

      Receipt of disposition instructions.

    • D.

      Unserviceable assets are never stored in the LRS warehouse.

    Correct Answer
    C. Receipt of disposition instructions.
    Explanation
    Unserviceable assets are stored in the logistics readiness squadron (LRS) warehouse until the receipt of disposition instructions. This means that once the LRS receives instructions on how to dispose of the unserviceable assets, they can then proceed with the appropriate actions, such as selling, scrapping, or transferring the assets. Until they receive these instructions, the assets will remain stored in the LRS warehouse.

    Rate this question:

  • 19. 

    How is a decision normally made on whether to give a customer a refund for the turn-in of property?

    • A.

      Automatically by the automated general support operating program (AGSOP).

    • B.

      Automatically under the Materiel Management System program control.

    • C.

      Externally by the accountable officer.

    • D.

      Externally by the flight chief.

    Correct Answer
    B. Automatically under the Materiel Management System program control.
    Explanation
    A decision on whether to give a customer a refund for the turn-in of property is normally made automatically under the Materiel Management System program control. This suggests that the decision-making process is automated and follows the guidelines and rules set within the program. The program likely assesses various factors such as the condition of the property, any applicable warranties or guarantees, and the customer's eligibility for a refund. By automating the decision-making process, it ensures consistency and efficiency in handling refund requests.

    Rate this question:

  • 20. 

    When monitoring awaiting part (AWP) end items, personnel at bases submit requests for repair parts on a fill or back-order basis using the urgency justification code (UJC)

    • A.

      AB” only.

    • B.

      AR” only.

    • C.

      AA” or “AB.”

    • D.

      AR” or “BR.”

    Correct Answer
    D. AR” or “BR.”
    Explanation
    Personnel at bases can submit requests for repair parts on a fill or back-order basis using the urgency justification code (UJC) "AR" or "BR." This means that they can request repair parts either when they are urgently needed (UJC "AR") or when they are needed for routine maintenance or future use (UJC "BR"). This flexibility allows bases to effectively manage their inventory and ensure that they have the necessary repair parts available when needed.

    Rate this question:

  • 21. 

    When the last awaiting part (AWP) due-out is released or canceled, what due-in from maintenance (DIFM) status code is assigned as a result of AWP processing

    • A.

      “02P.”

    • B.

      03P.”

    • C.

      AWP.”

    • D.

      FWP.”

    Correct Answer
    D. FWP.”
    Explanation
    When the last awaiting part (AWP) due-out is released or canceled, the due-in from maintenance (DIFM) status code assigned as a result of AWP processing is "FWP."

    Rate this question:

  • 22. 

    Which required delivery date (RDD) is assigned to output requisition transactions for two-level maintenance (2LM) items?

    • A.

      999

    • B.

      777

    • C.

      256

    • D.

      123

    Correct Answer
    B. 777
  • 23. 

    What are additional warehouses called if they are located within the activities they are supporting?

    • A.

      Supply points.

    • B.

      Warehouse.

    • C.

      Storage.

    • D.

      Vault.

    Correct Answer
    A. Supply points.
    Explanation
    Additional warehouses that are located within the activities they are supporting are called supply points. Supply points are strategically positioned warehouses that are situated close to the areas where the demand for goods or services is high. These warehouses are used to store and distribute products efficiently, ensuring timely delivery and reducing transportation costs. By locating supply points within the activities they support, companies can streamline their operations and improve customer satisfaction.

    Rate this question:

  • 24. 

    Who maintains accountability and control of assets in a supply point?

    • A.

      Logistics readiness squadron (LRS)/quality assurance.

    • B.

      LRS/materiel management activity.

    • C.

      AFMC SCM-R quality assurance.

    • D.

      AFMC SCM-R stock control activity.

    Correct Answer
    B. LRS/materiel management activity.
    Explanation
    The LRS/materiel management activity maintains accountability and control of assets in a supply point. They are responsible for managing the flow of materials, including receiving, storing, and distributing them. They ensure that the assets are properly accounted for and controlled to prevent loss or damage. This includes tracking inventory, conducting regular audits, and implementing procedures for asset management. The LRS/materiel management activity plays a crucial role in maintaining the efficiency and effectiveness of the supply chain.

    Rate this question:

  • 25. 

    Which transaction identification code (TRIC) is used to load, change, or delete supply point details?

    • A.

      MSI.

    • B.

      ISU.

    • C.

      FSP.

    • D.

      DFM.

    Correct Answer
    C. FSP.
    Explanation
    The correct answer is FSP. FSP stands for "Functional Supply Point" and is a transaction identification code used to load, change, or delete supply point details. This code is specifically related to supply point management within a system or database. The other options (MSI, ISU, DFM) are not specifically related to supply point details and do not serve the same purpose as FSP.

    Rate this question:

  • 26. 

    Which activity and organization code is used when loading a supply point detail document number?

    • A.

      B, 005.

    • B.

      B, 100.

    • C.

      S, 005.

    • D.

      S, 100.

    Correct Answer
    C. S, 005.
    Explanation
    When loading a supply point detail document number, the activity code "S" is used. The activity code "S" refers to the activity of supplying or delivering goods or services. The organization code "005" specifies the specific organization or department responsible for this activity. Therefore, the correct answer is S, 005.

    Rate this question:

  • 27. 

    What type of war reserve materiel (WRM) equipment is authorized to support a peacetime function that ceases to exist in wartime, thereby allowing the equipment to satisfy a wartime requirement?

    • A.

      WRM.

    • B.

      Mobility.

    • C.

      Joint use.

    • D.

      Major command (MAJCOM) use.

    Correct Answer
    C. Joint use.
    Explanation
    Joint use is the correct answer because it refers to the type of war reserve materiel (WRM) equipment that is authorized to support a peacetime function that ceases to exist in wartime. This means that the equipment can be used by multiple entities or organizations during peacetime, but in wartime, the function it supports is no longer needed. Joint use allows the equipment to be repurposed or reallocated to satisfy a wartime requirement.

    Rate this question:

  • 28. 

    What type of war reserve materiel (WRM) equipment is needed to be moved with a unit or is needed for deployment in an emergency or during wartime?

    • A.

      Major command (MAJCOM) use.

    • B.

      Mobility.

    • C.

      Joint use.

    • D.

      WRM.

    Correct Answer
    B. Mobility.
    Explanation
    Mobility refers to the type of war reserve materiel (WRM) equipment that is needed to be moved with a unit or is needed for deployment in an emergency or during wartime. This means that the equipment is designed to be easily transported and deployed to different locations as needed. It allows for flexibility and quick response in times of crisis or conflict.

    Rate this question:

  • 29. 

    Which major command (MAJCOM) is the lead command for Basic Expeditionary Airfield Resources (BEAR) systems?

    • A.

      Air Force Special Operations Command (AFSOC)/A4.

    • B.

      Air Force Materiel Command (AFMC)/A4.

    • C.

      Air Mobility Command (AMC)/A4.

    • D.

      Air Combat Command (ACC)/A4.

    Correct Answer
    D. Air Combat Command (ACC)/A4.
    Explanation
    The correct answer is Air Combat Command (ACC)/A4. This is because the ACC is responsible for organizing, training, and equipping combat-ready forces for air combat operations. The A4 directorate within ACC is specifically responsible for managing and providing resources for expeditionary airfield operations. Therefore, ACC/A4 is the lead command for Basic Expeditionary Airfield Resources (BEAR) systems.

    Rate this question:

  • 30. 

    How many sets comprise the Basic Expeditionary Airfield Resources (BEAR) component subsystems?

    • A.

      9

    • B.

      8

    • C.

      7

    • D.

      6

    Correct Answer
    D. 6
    Explanation
    The correct answer is 6. The Basic Expeditionary Airfield Resources (BEAR) component subsystems consist of six sets.

    Rate this question:

  • 31. 

    Which Basic Expeditionary Airfield Resources (BEAR) component subsystem set supports 150 personnel in the open-the-base force module?

    • A.

      B–150.

    • B.

      B–550i.

    • C.

      B–550f.

    • D.

      B–IO

    Correct Answer
    A. B–150.
    Explanation
    The correct answer is B–150. The B–150 Basic Expeditionary Airfield Resources (BEAR) component subsystem set is designed to support 150 personnel in the open-the-base force module. The other options, B–550i, B–550f, and B–IO, do not specify the number of personnel they can support or are not relevant to the given scenario.

    Rate this question:

  • 32. 

    Which Basic Expeditionary Airfield Resources (BEAR) component subsystem is a stand-alone set that provides a robust camp consisting of billeting, feeding, and hygiene to support 550 personnel?

    • A.

      B–150.

    • B.

      B–550i.

    • C.

      B–550f.

    • D.

      B–FF.

    Correct Answer
    B. B–550i.
    Explanation
    The correct answer is B–550i. The B–550i component subsystem is a stand-alone set that provides a robust camp consisting of billeting, feeding, and hygiene to support 550 personnel. This means that it has the necessary resources and facilities to accommodate, feed, and provide hygiene services for a group of 550 individuals.

    Rate this question:

  • 33. 

    Which Basic Expeditionary Airfield Resources (BEAR) component subsystem is an additive set to the B–550i, which increases support to 1,100 people?

    • A.

      B–150.

    • B.

      B–IF.

    • C.

      B–550f.

    • D.

      B–IO

    Correct Answer
    C. B–550f.
    Explanation
    The correct answer is B–550f. The B–550f is a Basic Expeditionary Airfield Resources (BEAR) component subsystem that is an additive set to the B–550i. It is specifically designed to increase support to 1,100 people.

    Rate this question:

  • 34. 

    This is an air transportable package of readiness spares, repair parts, and related maintenance supplies required to support planned wartime or contingency operations of a weapon system or support system for a specified period of time pending resupply.

    • A.

      In-place readiness spares packages (IRSP).

    • B.

      Mobility readiness spares packages (MRSP).

    • C.

      Consumable readiness spares packages (CRSP).

    • D.

      Flexible consumable readiness spares packages (FCRSP).

    Correct Answer
    B. Mobility readiness spares packages (MRSP).
    Explanation
    The given correct answer is "Mobility readiness spares packages (MRSP)". This package is specifically designed to be air transportable and contains all the necessary spares, repair parts, and maintenance supplies needed to support planned wartime or contingency operations for a specified period of time before resupply. The other options mentioned, such as in-place readiness spares packages (IRSP), consumable readiness spares packages (CRSP), and flexible consumable readiness spares packages (FCRSP), do not specifically mention the air transportability aspect, which is a key characteristic of MRSP.

    Rate this question:

  • 35. 

    How often is mobility readiness spares package (MRSP) authorization published?

    • A.

      Semi-annually

    • B.

      Quarterly.

    • C.

      Monthly.

    • D.

      Annually.

    Correct Answer
    D. Annually.
  • 36. 

    Which Air Force headquarters (HQ) office published mobility readiness spares package (MRSP) authorizations?

    • A.

      Air Combat Command (HQ ACC)/A4.

    • B.

      Air Mobility Command (HQ AMC/LGX).

    • C.

      United States Air Force (HQ USAF/LGX).

    • D.

      Air Force Materiel Command (HQ AFMC)/A4.

    Correct Answer
    C. United States Air Force (HQ USAF/LGX).
    Explanation
    The correct answer is United States Air Force (HQ USAF/LGX). This is the headquarters office responsible for publishing mobility readiness spares package (MRSP) authorizations.

    Rate this question:

  • 37. 

    Who will authorize readiness spares package (RSP) for allocation to specific units/bases?

    • A.

      LRS.

    • B.

      SOS.

    • C.

      MAJCOM.

    • D.

      AFMC.

    Correct Answer
    C. MAJCOM.
    Explanation
    MAJCOM stands for Major Command, which is a level of command within the United States Air Force. MAJCOM is responsible for the organization, training, equipping, and readiness of specific units and bases under its command. Therefore, it is the MAJCOM that will authorize the allocation of readiness spares packages (RSP) to specific units/bases.

    Rate this question:

  • 38. 

    Which transaction identification code (TRIC) is used to load the serial number/control record for readiness spares package (RSP) authorizations?

    • A.

      ISU.

    • B.

      MSI.

    • C.

      1EB.

    • D.

      1UB.

    Correct Answer
    C. 1EB.
    Explanation
    The transaction identification code (TRIC) 1EB is used to load the serial number/control record for readiness spares package (RSP) authorizations.

    Rate this question:

  • 39. 

    Which program is an automated way of processing readiness spares package (RSP) authorizations?

    • A.

      S05

    • B.

      S07.

    • C.

      SIFS.

    • D.

      DIREP.

    Correct Answer
    B. S07.
    Explanation
    S07 is the correct answer because it is the only option that is related to processing readiness spares package (RSP) authorizations. S05, SIFS, and DIREP are not specifically designed for this purpose.

    Rate this question:

  • 40. 

    How are readiness spares package (RSP) data inputted authorization records received from MAJCOM?

    • A.

      FKD.

    • B.

      XSF.

    • C.

      XVF.

    • D.

      1EB.

    Correct Answer
    C. XVF.
  • 41. 

    Which program is used to perform the readiness spares package (RSP) reconciliation?

    • A.

      Q05.

    • B.

      S05.

    • C.

      R07.

    • D.

      S07.

    Correct Answer
    B. S05.
    Explanation
    The program used to perform the readiness spares package (RSP) reconciliation is S05.

    Rate this question:

  • 42. 

    Which deployed flag reflects that mobility readiness spares package (MRSP) assets are deployed?

    • A.

      D

    • B.

      F

    • C.

      M

    • D.

      T

    Correct Answer
    A. D
    Explanation
    Flag D reflects that mobility readiness spares package (MRSP) assets are deployed.

    Rate this question:

  • 43. 

    The decision to transfer mobility readiness spares package (MRSP) rests with the host and the

    • A.

      Losing accountable officer.

    • B.

      Losing MAJCOM.

    • C.

      Gaining MAJCOM.

    • D.

      Gaining accountable officer.

    Correct Answer
    C. Gaining MAJCOM.
    Explanation
    The decision to transfer mobility readiness spares package (MRSP) rests with the gaining MAJCOM. This means that the Major Command (MAJCOM) that is receiving the MRSP is responsible for making the decision to transfer it. The host and losing accountable officer may have input or be involved in the process, but ultimately the gaining MAJCOM holds the authority to determine whether or not the transfer will take place.

    Rate this question:

  • 44. 

    What transaction identification code (TRIC) is processed to transfer between mobility readiness spares package (MRSP) and war reserve materiel (WRM) detail records?

    • A.

      DOR.

    • B.

      ISU.

    • C.

      1EB.

    • D.

      1KT.

    Correct Answer
    D. 1KT.
    Explanation
    The correct answer is 1KT. The question is asking for the transaction identification code (TRIC) that is used to transfer between mobility readiness spares package (MRSP) and war reserve materiel (WRM) detail records. The TRIC 1KT is the code that is processed for this type of transfer.

    Rate this question:

  • 45. 

    What action code is used when transferring multiple quantities from a mobility readiness spares package (MRSP) or war reserve materiel (WRM) detail record?

    • A.

      A

    • B.

      B

    • C.

      S

    • D.

      M

    Correct Answer
    D. M
    Explanation
    The action code "M" is used when transferring multiple quantities from a mobility readiness spares package (MRSP) or war reserve materiel (WRM) detail record. This indicates that there is a need to move or transfer multiple quantities of items from one location to another.

    Rate this question:

  • 46. 

    When processing transaction identification code (TRIC) 1KT, what occurs if the gaining detail record asset and the action quantity exceed the authorized quantity?

    • A.

      Reject.

    • B.

      Back order.

    • C.

      Management notice.

    • D.

      Record reversal and correction actions.

    Correct Answer
    A. Reject.
    Explanation
    If the gaining detail record asset and the action quantity exceed the authorized quantity when processing the transaction identification code (TRIC) 1KT, the system will reject the transaction.

    Rate this question:

  • 47. 

    Which program involves shelf life controls and other inspection functions for readiness spares package (RSP) assets?

    • A.

      TAV.

    • B.

      SIFS.

    • C.

      COSIS.

    • D.

      DIREPS.

    Correct Answer
    C. COSIS.
    Explanation
    COSIS is the program that involves shelf life controls and other inspection functions for readiness spares package (RSP) assets.

    Rate this question:

  • 48. 

    Which system do inventory managers use to formulate readiness spares package (RSP) levels?

    • A.

      Personal computer aircraft sustainability module (PC–ASM).

    • B.

      Consumable readiness spares packages (CRSP).

    • C.

      Mobility readiness spares packages (MRSP).

    • D.

      In-place readiness spares packages (IRSP).

    Correct Answer
    A. Personal computer aircraft sustainability module (PC–ASM).
    Explanation
    Inventory managers use the Personal computer aircraft sustainability module (PC–ASM) system to formulate readiness spares package (RSP) levels. This system helps them analyze and determine the appropriate levels of spares needed to ensure the readiness and sustainability of aircraft. It allows them to track inventory, forecast demand, and optimize the allocation of spares based on various factors such as maintenance schedules, historical data, and operational requirements. By using the PC–ASM system, inventory managers can effectively manage and maintain the necessary inventory levels to support aircraft operations.

    Rate this question:

  • 49. 

    Who has the responsibility for operation of a weapons storage facility when mobilization is authorized?

    • A.

      Deployment and distribution activity.

    • B.

      Materiel management activity.

    • C.

      Squadron readiness.

    • D.

      War readiness.

    Correct Answer
    B. Materiel management activity.
    Explanation
    Materiel management activity is responsible for the operation of a weapons storage facility when mobilization is authorized. This activity is responsible for the management and control of all military equipment and supplies, including weapons. They ensure that the weapons are properly stored, maintained, and accounted for during mobilization. Squadron readiness and war readiness may be involved in the overall readiness and preparedness for combat, but they do not specifically deal with the operation of weapons storage facilities. Deployment and distribution activity may be responsible for the transportation and movement of weapons, but not for their storage and operation.

    Rate this question:

  • 50. 

    Which product is used to manage and account for small arms and light weapons (SA/LW)?

    • A.

      Weapons registry.

    • B.

      Organizational visibility list.

    • C.

      Organizational equipment listing.

    • D.

      Custodian authorization/custody receipt listing.

    Correct Answer
    D. Custodian authorization/custody receipt listing.
    Explanation
    The custodian authorization/custody receipt listing is used to manage and account for small arms and light weapons (SA/LW). This listing keeps track of the individuals who have been authorized to be in possession of these weapons and also serves as a record of who currently has custody of them. By maintaining this listing, organizations can ensure that there is proper accountability and control over SA/LW, reducing the risk of loss, theft, or misuse.

    Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Mar 20, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Aug 29, 2017
    Quiz Created by
    Joseph
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.