General Shop Safety Test
(139).jpg "General Shop Safety Test - Quiz")
In a general shop, one finds a lot of tools and equipment that require special care when handling and should only be used for their designated uses. Do you think you have what it takes to work in a general shop? If you just said yes then take up the quiz below on general shop safety and see if we agree.
- 1.
Fire extinguisher Type A is used for
- A.
Gas, oil
- B.
Electrical, wiring
- C.
Wood, paper
- D.
Combustible Metals
- E.
None of the above
Correct Answer
C. Wood, paperExplanation
Fire extinguisher Type A is used for extinguishing fires that involve ordinary combustible materials such as wood and paper. This type of fire extinguisher contains water or a foam-based solution that works by cooling down the fire and preventing it from spreading. It is not suitable for fires involving flammable liquids, electrical equipment, or combustible metals.Rate this question:
-
- 2.
The student should notify the instructor immediately in case of
- A.
Accident
- B.
Injury
- C.
Defective equipment or tools
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The student should notify the instructor immediately in case of accident, injury, or defective equipment or tools. This is important because accidents and injuries need to be addressed promptly to ensure the safety and well-being of everyone involved. Additionally, defective equipment or tools can pose a risk and should be reported to prevent further accidents or injuries. Therefore, notifying the instructor in all of these situations is necessary to ensure a safe learning environment.Rate this question:
-
- 3.
While performing work in the mechanics lab, one should not
- A.
Get the tools to work with on your own
- B.
Return tools and supplies to their storage areas
- C.
Stay at your designated work station
- D.
Disturb other workers
Correct Answer
D. Disturb other workersExplanation
While performing work in the mechanics lab, it is important not to disturb other workers. This is because it can disrupt their focus and concentration, potentially leading to accidents or mistakes. Disturbing other workers can also create a noisy and chaotic environment, making it difficult for everyone to work efficiently. Therefore, it is crucial to be considerate and respectful of others by avoiding any unnecessary distractions or disruptions.Rate this question:
-
- 4.
Always keep____________ when moving or storing cylinders.
- A.
Rolling
- B.
Clean
- C.
Valve caps
- D.
Dry
Correct Answer
C. Valve capsExplanation
When moving or storing cylinders, it is important to always keep the valve caps. This is because the valve caps help to protect the valves from damage, contamination, or accidental opening. They create a seal that prevents any gas from leaking out and also keep out dirt, dust, or moisture that could potentially affect the functionality of the cylinder. Therefore, keeping the valve caps ensures the safety and integrity of the cylinder during transportation or storage.Rate this question:
-
- 5.
The acetylene regulator nut should be turned ____________ to tighten.
- A.
Clockwise
- B.
Counter clockwise
Correct Answer
A. ClockwiseExplanation
The acetylene regulator nut should be turned clockwise to tighten. This means that the nut should be rotated in the direction of the clock's hands when looking at it from above. Turning it in this direction will securely fasten the nut and ensure a tight connection.Rate this question:
-
- 6.
Any small piece of metal should be ___________ while drilling.
- A.
Clean
- B.
Oiled
- C.
Clamped
- D.
Held
Correct Answer
C. ClampedExplanation
When drilling, it is important to secure the material being drilled to prevent it from moving or spinning. Clamping the material ensures that it remains stable and stationary during the drilling process. This helps to maintain accuracy and prevent any potential accidents or damage. Therefore, the correct answer is "clamped".Rate this question:
-
- 7.
Oily rags should be placed in a
- A.
Trash can
- B.
Closed metal container
- C.
Open metal container
Correct Answer
B. Closed metal containerExplanation
Oily rags should be placed in a closed metal container to prevent the risk of fire. Oily rags can spontaneously combust due to the heat generated by the oxidation process of the oil. Placing them in a closed metal container helps to contain any heat or sparks, reducing the risk of ignition and potential fire hazards. Metal containers are also preferred over plastic or other materials as they are less likely to melt or catch fire in case of an incident.Rate this question:
-
- 8.
Running, pushing, fighting, practical jokes, and other misbehavior can result in
- A.
Someone getting hurt
- B.
Disciplinary action from your grade level administrator
- C.
Loss of shop privileges (and additional bookwork) for the term
- D.
Removal from class for the remainder of the term
- E.
All of the above
Correct Answer
E. All of the aboveExplanation
Running, pushing, fighting, and practical jokes are all forms of misbehavior that can potentially cause harm to someone. Engaging in such activities can result in someone getting hurt. Additionally, these actions are against the rules and can lead to disciplinary action from the grade level administrator. Moreover, participating in misbehavior can lead to the loss of shop privileges for the term, along with additional bookwork as a consequence. In severe cases, students may even be removed from the class for the remainder of the term. Therefore, all of the mentioned consequences are possible outcomes of running, pushing, fighting, and other misbehavior.Rate this question:
-
- 9.
Improper use of tools is not safe, an example of improper tool use is
- A.
Squashing a pencil or pen in a vise
- B.
Pounding on a screwdriver with a hammer
- C.
Using a machine with hood stings hanging untied
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The correct answer is "All of the above" because all three examples mentioned - squashing a pencil or pen in a vise, pounding on a screwdriver with a hammer, and using a machine with hood strings hanging untied - demonstrate improper use of tools that can lead to safety hazards.Rate this question:
-
- 10.
If there is an emergency in the lab and the instructor cannot respond:
- A.
One person should call the office by dialing 2290
- B.
Two people should go to the office and tell the principal or secretary
- C.
Someone who knows first aid should render aid
- D.
All of the above
Correct Answer
A. One person should call the office by dialing 2290Explanation
In case of an emergency in the lab where the instructor is unable to respond, it is important to take immediate action. One person should call the office by dialing 2290 to inform the authorities about the situation and seek assistance. This ensures that help is on the way and the necessary steps can be taken to address the emergency.Rate this question:
-
- 11.
When lifting a vehicle you should
- A.
Raise it an inch and give it a shake
- B.
Put jack stands under it
- C.
Use recomended lifting points
- D.
Never get under a jacked up car that isn't properly supported on safety stands. Once a car is placed on stands it should be checked for stability
- E.
All of the above
Correct Answer
E. All of the aboveExplanation
The correct answer is "All of the above." When lifting a vehicle, it is important to raise it an inch and give it a shake to ensure it is stable. Jack stands should be placed under the vehicle to provide proper support. Recommended lifting points should be used to prevent damage to the vehicle. It is crucial to never get under a jacked up car that isn't properly supported on safety stands. Once the car is placed on stands, it should be checked for stability to ensure safety.Rate this question:
-
- 12.
Eye protection (goggles, safety glasses and or face masks) are worn
- A.
When you are in the shop area
- B.
When the demonstration area of the classroom is in use
- C.
When you are out in the parking area
- D.
All of the above
- E.
Eye protection is optional
Correct Answer
A. When you are in the shop areaExplanation
Eye protection (goggles, safety glasses, and/or face masks) are worn when you are in the shop area. This is because the shop area is likely to have hazardous materials, tools, or equipment that could pose a risk to the eyes. Wearing eye protection helps to prevent any potential eye injuries that could occur in this area.Rate this question:
-
- 13.
Eye protection is
- A.
Sunglasses
- B.
Corrective lens glasses
- C.
Safety glasses
- D.
All of the above
Correct Answer
C. Safety glassesExplanation
Safety glasses are the correct answer because they provide protection for the eyes in various hazardous environments. Sunglasses are primarily used to protect the eyes from the sun's harmful rays, while corrective lens glasses are used to correct vision. Safety glasses, on the other hand, are specifically designed to protect the eyes from potential hazards such as flying debris, chemicals, and impact. They are commonly used in industries such as construction, manufacturing, and laboratories to prevent eye injuries. Therefore, safety glasses encompass the benefits of both sunglasses and corrective lens glasses while providing additional protective features.Rate this question:
-
- 14.
What category of fire extinguisher would you use on a gasoline fire
- A.
A
- B.
B
- C.
C
- D.
D
- E.
All of the above
Correct Answer
B. BExplanation
Category B fire extinguishers are used for flammable liquid fires, such as gasoline fires. These extinguishers contain substances like carbon dioxide or dry chemical powder that can smother the fire and prevent it from spreading. Category A extinguishers are used for ordinary combustibles like wood and paper, while category C extinguishers are used for electrical fires. Choosing category D would be incorrect as it is used for flammable metals, not gasoline fires. Therefore, the correct answer is B.Rate this question:
-
- 15.
Which is a hazard associated with a running vehicle?
- A.
A moving fan
- B.
Hot exhaust system
- C.
High voltage shock
- D.
All of the above
- E.
None of the above
Correct Answer
D. All of the aboveExplanation
All of the options listed are hazards associated with a running vehicle. A moving fan can cause injury if someone gets too close to it. The hot exhaust system can cause burns if touched. High voltage shock can occur if someone comes into contact with certain parts of the vehicle's electrical system. Therefore, all of these options pose potential hazards when dealing with a running vehicle.Rate this question:
-
- 16.
The should always be used in operating machinery
- A.
Proper technique
- B.
Safety gloves
- C.
Grounded outlet
- D.
None of the above
Correct Answer
A. Proper techniqueExplanation
Proper technique should always be used in operating machinery to ensure safety and prevent accidents. This includes following the correct procedures, using the appropriate tools and equipment, and being aware of any potential hazards. By using proper technique, individuals can minimize the risk of injury and maintain a safe working environment. Safety gloves and grounded outlets may also be important safety measures, but they are not the only factors that should be considered when operating machinery.Rate this question:
-
- 17.
If a machine or power tool malfunctions you should
- A.
Use a different one
- B.
Turn it off and tell the instructor immediately
- C.
Keep using it unless it stops
- D.
Throw it away
- E.
None of the above
Correct Answer
B. Turn it off and tell the instructor immediatelyExplanation
When a machine or power tool malfunctions, it is important to prioritize safety. Continuing to use a malfunctioning tool can be dangerous and may cause further damage or harm. Therefore, the correct course of action is to turn off the machine or power tool immediately to prevent any potential accidents or injuries. Additionally, informing the instructor about the malfunction ensures that they are aware of the situation and can take appropriate measures to address the issue.Rate this question:
-
- 18.
What category of fire extinguisher would do more harm than good on a gasoline fire?
- A.
A
- B.
B
- C.
C
- D.
Any of the above
Correct Answer
A. AExplanation
Category A fire extinguishers are designed to extinguish fires involving ordinary combustible materials such as wood, paper, and cloth. However, they are not effective for flammable liquid fires like gasoline. In fact, using a Category A fire extinguisher on a gasoline fire can make the situation worse as it may spread the fire or cause it to reignite. Therefore, using a Category A fire extinguisher on a gasoline fire would do more harm than good.Rate this question:
-
- 19.
If the lights go out
- A.
Keep working
- B.
Crawl under a table
- C.
Wait for your machine to stop before moving
- D.
None of the above
Correct Answer
C. Wait for your machine to stop before movingExplanation
When the lights go out, it is important to wait for your machine to stop before moving. This is because if you try to move while the machine is still running, you may risk injuring yourself or damaging the equipment. It is always best to prioritize safety and wait for the machine to come to a complete stop before taking any further action.Rate this question:
-
- 20.
If you get something in your eye
- A.
Rub it
- B.
Have a friend wipe it with a paper towel
- C.
Use the eye wash to rinse your eyes
- D.
None of the above
Correct Answer
C. Use the eye wash to rinse your eyesExplanation
When something gets into your eye, it is important to rinse it out to remove any foreign particles. Rubbing your eye or having a friend wipe it with a paper towel can potentially cause further irritation or damage. Using an eye wash is the most effective and safe method to flush out any irritants from the eye.Rate this question:
-
- 21.
Always check with before using tools or equipment
- A.
Instructor
- B.
Friends
- C.
Counselor
Correct Answer
A. InstructorExplanation
The correct answer is "Instructor" because an instructor is someone who provides guidance and expertise in a specific field or subject. When using tools or equipment, it is important to consult with an instructor who can provide proper instructions, safety guidelines, and ensure that the equipment is being used correctly. Friends may not have the necessary knowledge or expertise, and a counselor may not have the specific knowledge related to tools and equipment. Therefore, an instructor is the most appropriate person to consult in this situation.Rate this question:
-
- 22.
Check chemical twice to make sure you have the correct substance and the correct proportions
- A.
Labels
- B.
Color
- C.
Smell
Correct Answer
A. LabelsExplanation
The correct answer is "Labels" because checking the labels on the chemical twice ensures that you have the correct substance and the correct proportions. This is important for safety reasons, as using the wrong substance or incorrect proportions can lead to accidents or ineffective results. The labels provide important information about the chemical composition and instructions for use, allowing you to verify that you have the right substance and that it is being used correctly.Rate this question:
-
- 23.
PPE stands for
- A.
Proper protection equipment
- B.
Protect public environment
- C.
Personal Protection equipment
Correct Answer
C. Personal Protection equipmentExplanation
The correct answer is Personal Protection equipment (PPE). PPE refers to the protective gear or clothing worn to minimize exposure to hazards or risks that may cause injury or illness. It includes items such as helmets, gloves, masks, goggles, and protective clothing. PPE is essential in various industries, including healthcare, construction, and manufacturing, to ensure the safety and well-being of individuals working in potentially dangerous environments.Rate this question:
-
- 24.
MSDS stands for?
- A.
Medical safety data services
- B.
Material service data sheets
- C.
Material safety data sheets
Correct Answer
C. Material safety data sheetsExplanation
MSDS stands for Material Safety Data Sheets. These sheets provide detailed information about the potential hazards and safety precautions associated with a particular substance or product. They contain information on the physical and chemical properties, handling and storage procedures, emergency measures, and disposal methods. MSDSs are essential for ensuring the safe use and handling of hazardous materials in various industries, including manufacturing, construction, and healthcare.Rate this question:
-
- 25.
The hood or upper gap adjustment should be kept inch from the wheel and should be adjusted for wear to protect the operator from flying fragments, or a busting wheel
- A.
1\8
- B.
1\4
- C.
1\2
Correct Answer
B. 1\4Explanation
The correct answer is 1/4. The hood or upper gap adjustment should be kept 1/4 inch from the wheel and should be adjusted for wear to protect the operator from flying fragments or a bursting wheel.Rate this question:
-
- 26.
Always keep on when storing or moving cylinders
- A.
Clean
- B.
Valve caps
- C.
Dry
Correct Answer
B. Valve capsExplanation
Valve caps should always be kept on when storing or moving cylinders to ensure the safety and integrity of the cylinders. The valve caps help to protect the valves from damage, contamination, and accidental opening, which could result in gas leaks or other hazards. By keeping the valve caps on, the cylinders are kept clean and dry, preventing any potential issues that could arise from exposure to moisture or debris.Rate this question:
-
- 27.
Any small piece of metal should be while drilling
- A.
Clamp
- B.
Clean
- C.
Oiled
Correct Answer
A. ClampExplanation
When drilling any small piece of metal, it is important to use a clamp. This is because a clamp securely holds the metal piece in place, preventing it from moving or spinning while drilling. This ensures accuracy and safety during the drilling process. Using a clamp also allows for better control and stability, making it easier to drill precise holes without damaging the metal or causing any accidents.Rate this question:
-
- 28.
The most common route of exposure for most health hazards is .
- A.
Ingestion
- B.
Skin absorption
- C.
Inhalation
Correct Answer
C. InhalationExplanation
The most common route of exposure for most health hazards is inhalation. This means that the hazards are typically breathed in through the respiratory system. Inhaling hazardous substances can lead to various health issues as the substances can directly enter the bloodstream and affect different organs in the body. This is why proper ventilation and respiratory protection are important in environments where hazardous substances are present.Rate this question:
-
- 29.
You should report which injuries?
- A.
Serious injuries
- B.
Only injuries to yourself
- C.
Injuries to other people
- D.
All injuries to you and other people
Correct Answer
D. All injuries to you and other peopleExplanation
You should report all injuries to you and other people. This includes both serious injuries and any other injuries that may have occurred. It is important to report all injuries so that appropriate medical attention can be provided and necessary actions can be taken to prevent further harm or accidents.Rate this question:
-
- 30.
A student is permitted to leave the mechanics laboratory only
- A.
With the instructors permission
- B.
To go to the office
- C.
To go to the bathroom
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The student is permitted to leave the mechanics laboratory only with the instructor's permission. Additionally, they are allowed to go to the office or the bathroom. Therefore, all of the above options are correct.Rate this question:
-
- 31.
Which of the following is not allowed in the mechanics laboratory?
- A.
Working and cleaning
- B.
Horseplay
- C.
Thinking
- D.
All of the above
Correct Answer
B. HorseplayExplanation
Horseplay is not allowed in the mechanics laboratory because it can lead to accidents, injuries, and damage to equipment. Horseplay involves engaging in rough or playful behavior that is not appropriate in a laboratory setting. It can distract others, compromise safety protocols, and disrupt the work environment. To maintain a safe and productive laboratory, it is important to refrain from engaging in horseplay and instead focus on the tasks at hand, such as working on experiments and cleaning up after completing them.Rate this question:
-
- 32.
Shop clothing is unsafe if it is
- A.
Loose
- B.
Baggy
- C.
Flammable
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
Loose clothing can pose a safety risk as it may get caught in machinery or cause tripping hazards. Baggy clothing can also be dangerous as it may obstruct movement or get entangled in equipment. Flammable clothing can easily catch fire and pose a serious threat to the wearer. Therefore, all of the mentioned characteristics - loose, baggy, and flammable - make shop clothing unsafe.Rate this question:
-
- 33.
Loud noises in the mechanics lab causes others to be
- A.
Happy
- B.
Sad
- C.
Prone to accident
- D.
Talkative
Correct Answer
C. Prone to accidentExplanation
Loud noises in the mechanics lab can be distracting and disruptive, causing others to lose focus and concentration. This lack of focus increases the likelihood of accidents occurring, as individuals may not be paying attention to their surroundings or may make mistakes due to the noise-induced disruption. Therefore, the correct answer is prone to accident.Rate this question:
-
- 34.
The orange color coding system refers to
- A.
Danger
- B.
Caution
- C.
Warning
- D.
Disaster
Correct Answer
C. WarningExplanation
The orange color coding system is commonly used to indicate a warning. This means that there is a potential danger or hazard that individuals need to be cautious about. The use of the color orange in this context helps to visually alert people to the presence of a warning, allowing them to take appropriate action to avoid any potential harm or negative consequences.Rate this question:
-
- 35.
If a fellow student shows up to class under the influence of drugs or alcohol
- A.
Notify the instructor
- B.
Discourage them from working with power tools
- C.
A and B
Correct Answer
C. A and BExplanation
If a fellow student shows up to class under the influence of drugs or alcohol, it is important to notify the instructor. This is necessary because the instructor needs to be aware of the situation and can take appropriate action to ensure the safety and well-being of the student and others in the class. Additionally, it is also important to discourage the student from working with power tools as they may not be in the right state of mind to handle them safely, which could potentially lead to accidents or injuries. Therefore, both options A and B are correct actions to take in this situation.Rate this question:
-
- 36.
The personal protective equipment that should be worn when operating the bench grinder is
- A.
Gloves
- B.
Ear protectors
- C.
Safety glasses
- D.
All of these
Correct Answer
C. Safety glassesExplanation
When operating a bench grinder, it is important to wear personal protective equipment to prevent any potential injuries. Safety glasses are necessary to protect the eyes from sparks, debris, and flying particles that may be produced during grinding. While gloves can provide additional protection for the hands, they are not specifically required for operating a bench grinder. Ear protectors, on the other hand, are not directly related to the hazards of a bench grinder and are not necessary in this context. Therefore, the correct answer is safety glasses.Rate this question:
-
- 37.
The Z-87.1 logo and manufacturing emblem on shop safety glasses tells the users specifically thats the glasses are
- A.
Industry quality
- B.
Safe
- C.
Made in the USA
Correct Answer
A. Industry qualityExplanation
The Z-87.1 logo and manufacturing emblem on shop safety glasses indicate that the glasses are of industry quality. This means that they meet the standards and requirements set by the industry for safety glasses. It assures the users that the glasses have undergone rigorous testing and have been proven to provide adequate protection in various hazardous work environments. The logo and emblem serve as a mark of reliability and quality, giving users confidence in the safety and effectiveness of the glasses.Rate this question:
-
- 38.
Students should not rush lab work because it may lead to
- A.
Premature failure
- B.
Structural collapse
- C.
Bad lab project
- D.
All the above
Correct Answer
D. All the aboveExplanation
Rushing lab work can result in premature failure because important steps or procedures may be skipped or not properly executed. This can lead to structural collapse if the lab work involves building or constructing something. Additionally, rushing can result in a bad lab project overall, as the quality of the work may be compromised and important data or observations may be missed. Therefore, all of the given options - premature failure, structural collapse, and bad lab project - can be consequences of rushing lab work.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 07, 2010Quiz Created by
Ibarrac
- Back Safety Quizzes
- Chemistry Safety Quizzes
- Drill Press Safety Quizzes
- Electrical Safety Quizzes
- Fire Safety Quizzes
- General Safety Quizzes
- Kitchen Safety Quizzes
- Laboratory Safety Quizzes
- Lathe Safety Quizzes
- Office Safety Quizzes
- Online Safety Quizzes
- Radiation Safety Quizzes
- Safe Lifting Quizzes
- Work Safety Quizzes
- Workplace Safety Quizzes
Back to top