Heavy Duty Truck Systems: Trivia Quiz

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Aneday
A
Aneday
Community Contributor
Quizzes Created: 1 | Total Attempts: 659
| Attempts: 659
Quiz Flashcard
SettingsSettings
Please wait...
  • 1/18 Questions

    There is a list of over 20 different items on the driver post-trip inspection sheet which includes brakes, air compressor, frames, fifth wheel, fuel system, steering, and suspension.

    • True
    • False
Please wait...
About This Quiz

If you are planning on being a heavy-duty driver, you need to know a thing or two about how to operate one and correct some of the issues you may face on the road. As we continue learning more about these trucks, the quiz below is specifically on Heavy Duty Truck Systems. Do give it a try and get to review what you got to learn. All the best!

Heavy Duty Truck Systems: Trivia Quiz - Quiz

Quiz Preview

  • 2. 

    Fleet maintenance standards should be higher than CVSA standards.

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Fleet maintenance standards should be higher than CVSA (Commercial Vehicle Safety Alliance) standards because fleet maintenance standards are specific to a particular fleet and take into account the unique requirements and conditions of the fleet's vehicles. CVSA standards, on the other hand, are general standards that apply to all commercial vehicles. Therefore, to ensure the highest level of safety and efficiency, fleet maintenance standards should exceed the minimum requirements set by CVSA.

    Rate this question:

  • 3. 

    When creating a fleet specific maintenance program the only guidelines you need to follow are OEM service guidelines.

    • True

    • False

    Correct Answer
    A. False
    Explanation
    When creating a fleet specific maintenance program, it is not sufficient to only follow OEM service guidelines. While these guidelines provide important recommendations, it is also necessary to consider other factors such as the specific needs and conditions of the fleet, industry standards, regulatory requirements, and the expertise of maintenance professionals. Ignoring these additional factors may result in an ineffective maintenance program that fails to address the unique requirements of the fleet. Therefore, the statement that the only guidelines needed are OEM service guidelines is false.

    Rate this question:

  • 4. 

    In which step of the inspection procedure should the driver look for fluid leaks?

    • Step 1

    • Step 4

    • Step 5

    • Step 8

    Correct Answer
    A. Step 1
    Explanation
    In Step 1 of the inspection procedure, the driver should look for fluid leaks. This is the initial step where the driver examines the vehicle for any signs of leakage, such as oil, coolant, or brake fluid. By checking for fluid leaks at the beginning of the inspection, the driver can identify any potential issues that may require immediate attention or maintenance before operating the vehicle.

    Rate this question:

  • 5. 

    What does CBM stand for?

    • Condition Based Maintenance

    • Component Based Maintenance

    • Computer Based Maintenance

    • Condition Based Management

    Correct Answer
    A. Condition Based Maintenance
    Explanation
    CBM stands for Condition Based Maintenance. This term refers to a maintenance strategy that involves monitoring the condition of equipment or assets in order to determine when maintenance should be performed. By using various techniques such as data analysis, sensors, and predictive models, CBM aims to optimize maintenance activities and reduce costs by performing maintenance only when necessary based on the actual condition of the equipment. This approach helps to prevent unexpected failures and maximize the lifespan of assets.

    Rate this question:

  • 6. 

    In addition to a pre-trip inspection, what else must drivers review?

    • Cargo

    • Last inspection record

    • Previous maintenance reports

    • Previous repairs performed

    Correct Answer
    A. Last inspection record
    Explanation
    Drivers must review the last inspection record in addition to conducting a pre-trip inspection. This is important to ensure that any issues or concerns identified during the previous inspection have been addressed and resolved before the driver starts their trip. Reviewing the last inspection record helps to maintain the safety and integrity of the vehicle and ensures that any necessary repairs or maintenance have been completed.

    Rate this question:

  • 7. 

    A higher SAE rating indicates the oil has a higher______and will flow more.              

    Correct Answer
    viscosity
    slowly
    Explanation
    A higher SAE rating indicates that the oil has a higher viscosity and will flow more slowly. Viscosity refers to the thickness or resistance to flow of a fluid. Therefore, if the oil has a higher viscosity, it means it is thicker and will flow more slowly.

    Rate this question:

  • 8. 

    How much money is spent on "Unnecessary PM" each year?

    • $1 billion

    • $5 billion

    • None

    • $25 billion

    Correct Answer
    A. $25 billion
    Explanation
    The correct answer is $25 billion. This means that each year, a total of $25 billion is spent on "Unnecessary PM".

    Rate this question:

  • 9. 

    As water is reduced in the coolant solution, it's the ability to dissipate heat is increased.

    • True

    • False

    Correct Answer
    A. False
    Explanation
    As water is reduced in the coolant solution, its ability to dissipate heat is not increased. In fact, the opposite is true. Water has a higher heat capacity compared to other components in the coolant solution, such as antifreeze. Therefore, reducing the amount of water in the coolant solution would actually decrease its ability to dissipate heat effectively.

    Rate this question:

  • 10. 

    Heat and use alter the________ properties of lubricants.

    Correct Answer
    chemical
    Explanation
    Heat and use can cause changes in the chemical properties of lubricants. When a lubricant is exposed to high temperatures, it can undergo chemical reactions such as oxidation or thermal degradation, which can alter its composition and performance. Additionally, the mechanical action of using lubricants can also lead to chemical changes, such as the breakdown of additives or the formation of reaction products. These chemical alterations can affect the lubricant's ability to reduce friction, prevent wear, and provide adequate lubrication, ultimately impacting its overall effectiveness.

    Rate this question:

  • 11. 

    Scrubbed or polished areas on either side of the lug might indicate:

    • Wheel bearing failure

    • Uneven lug torque

    • Rim slippage

    • Low tire pressure

    Correct Answer
    A. Rim slippage
    Explanation
    Scrubbed or polished areas on either side of the lug might indicate rim slippage. This means that the rim has moved or shifted, causing friction between the lug and the rim. This could be due to loose lug nuts or improper installation of the wheel. When the rim slips, it can cause the lug to rub against the surrounding area, resulting in scrubbed or polished marks.

    Rate this question:

  • 12. 

    What 2 factors are used to create a graph based on a CBM algorithm?

    • Hours of operation and driver inspection records

    • Hours of operation and incident of failure

    • PM Records and driver inspection records

    • Human decided risk factor and incident of failure

    Correct Answer
    A. Hours of operation and incident of failure
    Explanation
    A graph based on a CBM (Condition-Based Maintenance) algorithm is created using two factors: hours of operation and incident of failure. The hours of operation provide information on the usage and workload of the system, while the incident of failure indicates the frequency and severity of malfunctions or breakdowns. By analyzing these two factors, the CBM algorithm can determine the optimal maintenance schedule and identify potential issues before they escalate into major failures, thus improving the overall reliability and performance of the system.

    Rate this question:

  • 13. 

    Automatic greasing systems dispense grease using a______valve.

    Correct Answer
    metering
    Explanation
    Automatic greasing systems dispense grease using a metering valve. A metering valve is a device that controls the flow rate of grease being dispensed. It ensures that the correct amount of grease is delivered to the desired location, preventing over-lubrication or under-lubrication. The metering valve allows for precise control and distribution of grease, ensuring optimal lubrication for the equipment or machinery.

    Rate this question:

  • 14. 

    AME is only as effective as the person using it, therefore________is essential.

    Correct Answer
    Accurate data entry
    Explanation
    Accurate data entry is essential because the effectiveness of AME (Assisted Medical Evaluation) relies on the person using it. If the data entered into the system is inaccurate, it can lead to incorrect evaluations and potentially harmful decisions. Therefore, ensuring accurate data entry is crucial to maximize the effectiveness of AME and to ensure the reliability of the evaluations and decisions made based on it.

    Rate this question:

  • 15. 

    Who is ultimately responsible for verifying that the vehicle is in safe, operable conditions?

    • The technician

    • The driver

    • The service manager

    • The last person who operated the vehicle

    Correct Answer
    A. The technician
    Explanation
    The technician is ultimately responsible for verifying that the vehicle is in safe, operable conditions. They have the knowledge and expertise to inspect and diagnose any potential issues with the vehicle. Their role involves conducting regular maintenance, identifying and repairing any faults, and ensuring that all safety features are functioning properly. By performing these tasks, the technician ensures that the vehicle is safe for operation and minimizes the risk of accidents or malfunctions.

    Rate this question:

  • 16. 

    AME stands for

    Correct Answer
    Automated Maintenance Environment
    Explanation
    AME stands for Automated Maintenance Environment. This term refers to a system or environment that utilizes automation to perform maintenance tasks. It is designed to streamline and optimize maintenance processes by automating repetitive tasks, reducing human error, and increasing efficiency. An Automated Maintenance Environment can include various technologies such as robotics, artificial intelligence, and machine learning to automate maintenance activities in industries such as manufacturing, aviation, and transportation.

    Rate this question:

  • 17. 

    Which of the following should be checked in the 2nd step [engine compartment] of the pre-trip inspection procedure? 

    • Coolant level

    • Alternator belts

    • Brake pads

    • Power steering fluid

    • Engine hood clearance

    Correct Answer(s)
    A. Coolant level
    A. Alternator belts
    A. Power steering fluid
    Explanation
    In the 2nd step of the pre-trip inspection procedure, the following should be checked in the engine compartment: coolant level, alternator belts, and power steering fluid. These components are important for the proper functioning of the vehicle and should be inspected to ensure they are in good condition before starting a trip. Checking the coolant level helps prevent overheating of the engine, inspecting the alternator belts ensures they are not worn or damaged, and checking the power steering fluid ensures smooth steering control.

    Rate this question:

  • 18. 

    AME software is adaptive to such conditions as 

    • Performance condition changes

    • Product quality changes

    • Driver abuse

    • Bad Weather

    • Unexpected accidents

    Correct Answer(s)
    A. Performance condition changes
    A. Product quality changes
    A. Driver abuse
    Explanation
    The correct answer is Performance condition changes, Product quality changes, and Driver abuse. AME software is designed to adapt to these conditions in order to ensure optimal performance and functionality. Performance condition changes can include variations in temperature, humidity, or load on the system, and the software can adjust its parameters accordingly. Product quality changes may require the software to modify its algorithms or processes to accommodate different inputs or outputs. Driver abuse, such as aggressive driving or improper use of the system, can also be detected and managed by the software to maintain safety and efficiency.

    Rate this question:

Quiz Review Timeline (Updated): Sep 9, 2024 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Sep 09, 2024
    Quiz Edited by
    ProProfs Editorial Team
  • May 26, 2011
    Quiz Created by
    Aneday
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.