INTEGRATED SCIENCE( First Year )

Approved & Edited by ProProfs Editorial Team

The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.

Learn about Our Editorial Process

| By Lovelene_10

Lovelene_10

Community Contributor

Quizzes Created: 1 | Total Attempts: 1,116

Questions: 10 | Attempts: 1,116 | Updated: Mar 20, 2023

Questions

Settings

Feedback

During the Quiz End of Quiz

Difficulty

Sequential Easy First Hard First

Play as

Quiz Flashcard

Create your own Quiz

Share on Facebook Share on Twitter Share on Whatsapp Share on Pinterest Share on Email Copy to Clipboard Embed on your website

You will learn what are the proper ways to do while you are inside the labaratory room.

Questions and Answers

1.

When doing an experiment like heating or anything that uses fire, what should you be ready with?
- A.
  
  An apron
- B.
  
  A damp cloth
- C.
  
  A pail of water
- D.
  
  A wet tissue
Correct Answer
A. An apron

Explanation
When doing an experiment that involves heating or using fire, it is important to be ready with an apron. An apron provides protection for your clothing, preventing it from getting damaged or catching fire. It is a safety precaution that helps to minimize the risk of accidents or injuries while working with heat or fire.

Rate this question:

5
0
2.

Acids must be handled with extreme care. In diluting an acid, what should you do?
- A.
  
  Do it in anyway you want
- B.
  
  Always add an acid slowly to water
- C.
  
  Always add the water to the acid
- D.
  
  Mix the acid by to the water by stirring
Correct Answer
B. Always add an acid slowly to water

Explanation
When diluting an acid, it is important to always add the acid slowly to water. This is because adding water to acid can cause a violent reaction, splashing the acid and potentially causing harm. By adding the acid slowly to water, the reaction is less likely to be violent and the mixture can be stirred to ensure proper dilution. This method helps to minimize the risk of accidents and ensures safe handling of acids.

Rate this question:

2
1
3.

Given four labaratory apparatus: spring balance, graduated cylinder, microscope and test tube. Which will you use to get the mass of water?
- A.
  
  The spring balance
- B.
  
  The graduated cylinder
- C.
  
  The microscope
- D.
  
  The test tube
Correct Answer
B. The graduated cylinder

Explanation
To get the mass of water, you would use the graduated cylinder. The graduated cylinder is a measuring device used to accurately measure the volume of liquids. By measuring the volume of water in the graduated cylinder, you can then use the density of water to calculate its mass.

Rate this question:

3
1
4.

You are asked by your teacher to clean the test tube. What should you use?
- A.
  
  Graduated cylinder
- B.
  
  Triple beam balance
- C.
  
  Test tube brush
- D.
  
  Crucible tong
Correct Answer
C. Test tube brush

Explanation
To clean a test tube, one should use a test tube brush. This tool is specifically designed to fit inside the narrow and cylindrical shape of a test tube, allowing for effective cleaning. Using a graduated cylinder or triple beam balance would not be suitable for cleaning purposes. Crucible tongs are used for holding and manipulating hot crucibles, not for cleaning test tubes. Therefore, the correct tool to use for cleaning a test tube is a test tube brush.

Rate this question:

3
0
5.

You are asked to measure the density of a liquid. Density is defined as mass over volume. Which of the following apparatus will you use? I. beaker III. triple beam balance II. graduated cylinder IV. test tube
- A.
  
  I and II only
- B.
  
  II and III only
- C.
  
  III and IV only
- D.
  
  I, II, III and IV
Correct Answer
B. II and III only

Explanation
To measure the density of a liquid, you need to know its mass and volume. The apparatus that can help you determine both of these factors are a graduated cylinder (II) and a triple beam balance (III). A graduated cylinder can be used to measure the volume of the liquid, while a triple beam balance can be used to measure the mass of the liquid. Therefore, using both apparatus (II and III) will allow you to calculate the density accurately. The beaker (I) and test tube (IV) are not suitable for measuring volume or mass accurately, so they are not included in the correct answer.

Rate this question:
6.

Which of the following labaratory precautions in INCORRECT?
- A.
  
  All chemicals in the labaratory are to be considered dangerous. touch, taste, or smell any chemical unless specifically instructed to do so
- B.
  
  Never leave a lit burner unattended. Never leave anything that is being heated or is visibly reacting unattended.
- C.
  
  Wear safety goggles and aprons to all times in the labaratory
- D.
  
  Report damaged equipment/ apparatus immediately
Correct Answer
C. Wear safety goggles and aprons to all times in the labaratory

Explanation
The correct answer is "wear safety goggles and aprons at all times in the laboratory". This is incorrect because safety goggles and aprons should be worn at all times in the laboratory to protect against potential hazards.

Rate this question:

1
0
7.

what will you use to transfer liquid to another bottle without spilling?
- A.
  
  Funnel
- B.
  
  Test tube
- C.
  
  Petri dish
- D.
  
  Graduated cylinder
Correct Answer
A. Funnel

Explanation
A funnel is used to transfer liquid to another bottle without spilling because it has a wide top opening that allows the liquid to be easily poured into the funnel. The narrow spout of the funnel helps to control the flow of the liquid and direct it into the narrow opening of the bottle, minimizing the chances of spillage.

Rate this question:
8.

A substance which can burn the skin and another materials.

Correct Answer
acid

Explanation
Acid is a substance that can burn the skin and other materials. Acids are corrosive and have the ability to react with other substances, causing damage or destruction. When acids come into contact with the skin, they can cause burns and irritation. Additionally, acids can corrode or dissolve certain materials, such as metals or fabrics. Therefore, acid is the correct answer as it fits the description of a substance that can burn the skin and other materials.

Rate this question:

3
4 0
9.

Process of changing liquid to gas

Correct Answer
evaporation

Explanation
Evaporation is the process by which a liquid changes into a gas. It occurs when the molecules of a liquid gain enough energy to overcome the forces of attraction between them and escape into the surrounding environment as vapor. During evaporation, the liquid's temperature decreases as the high-energy molecules leave, resulting in cooling. This process is commonly observed when water evaporates from a surface, such as when a puddle dries up or clothes dry after being hung out to air. Evaporation is an important part of the water cycle and plays a crucial role in weather patterns and the distribution of water on Earth.

Rate this question:

1
4 0
10.

Amopunt of space occupied by matter

Correct Answer
volume

Explanation
The correct answer is "volume". Volume refers to the amount of space that matter occupies. It is a measure of the three-dimensional space that an object or substance occupies. In other words, it is the physical size of an object or the capacity of a container.

Rate this question:

5
4 1

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Mar 20, 2023

Quiz Edited by
ProProfs Editorial Team
Sep 13, 2011

Quiz Created by
Lovelene_10

Integrated Science( First Year )

When doing an experiment like heating or anything that uses fire, what should you be ready with?

Acids must be handled with extreme care. In diluting an acid, what should you do?

Given four labaratory apparatus: spring balance, graduated cylinder, microscope and test tube. Which will you use to get the mass of water?

You are asked by your teacher to clean the test tube. What should you use?

You are asked to measure the density of a liquid. Density is defined as mass over volume. Which of the following apparatus will you use? I. beaker III. triple beam balance II. graduated cylinder IV. test tube

Which of the following labaratory precautions in INCORRECT?

what will you use to transfer liquid to another bottle without spilling?

A substance which can burn the skin and another materials.

Process of changing liquid to gas

Amopunt of space occupied by matter