Jumpmaster Quiz Written Exam Review

Safe Airdrop Speed for the T-11 is ____Knots (min) and ____Knots(max)

Deployment For the T-11 takes about ______

There are ____ slip assist tabs per riser on the T-11 for a total of ____ slip assist tabs

The T-11 Diagonal backstrap is ____ long

The T-11 Horizontal Backstrap is _____ long

There are ___ points of adjustment on the T-11 harness

Waistband and Waistband adjustment panel must have at least ____ of stitching present to be considered serviceable.

The T-11 weighs ____

The static line slack retainer band must be present for the parachute to be serviceable

• A.

  True

• B.

  False

The Main curve pin must be seated at the ______ position

There are ____ components the JM will inspect during JMPI of the T-11;

List the components the JM will inspect during JMPI of  the T-11

The D-Ring has a rated capacity of _______

The T-11 rate of decent is ______

There are ____ components the JM will inspect during JMPI of the T-11 Reserve

Lis the components the JM will inspect during JMPI of the T-11 Reserve

The connector snaps have a rated capacity of ______

Spreader Bar ties are composed of ____________________________, and must be ____ in color

The T-11 reserve weighs ______

At least ____ of force are required to pull the release handle and activate the T-11 Reserve

The T-10 weighs between ____ and ____

The Universal Static line snap Hook has a rated capacity of _____

There are ___ break-away ties on the T-10 Main

List the break-away ties on the T-10 Main

At 250lbs the rate of decent is between ____ and ____

The safe airdrop speed range for the T-10 is ____ to _____

Deployment Takes about _____ at ____ (speed)

There are ___ components for the T-10

List the components for the T-10:

There are ____ points of adjustment on the T-10;

List the points of adjustment on the T-10; List them

The Diagonal backstrap (IS  / IS NOT) one of the 5 points of adjustment, its sizes are (1,2,3,4) 

There are ___ points of attachment; List them

List the points of attachment

The diameter of the canopy of the MIRPS/SLCP is ______

The MIRPS/SLCP weighs apprx_________

There ____ components to the SLCP;`

List the components to the MIRPS/SLCP

The Pilot parachute of the MIRPS/SLCP skirt diameter is ______

The ballistic helmet has ___ sizes; they are

There are ___ components  that make up the ballistic helmet

List the components  that make up the ballistic helmet:

The pull the dot fastener w/tab is made out of_____________

There are 2 additional item on the Ballistic helmet that must be worn during Airborne operations; they are

How much space between the helmet and head must there be for the helmet to be worn correctly?

Use a 5/8” mounting screw when using the modified foam impact pad

• A.

  True

• B.

  False

The ACH has ___ sizes; they are

There ___ components the make up the ACH

What are the components the make up the ACH

There are 2 pad sizes that are authorized: they the size(smaller) ___ which is ____ and size(larger) ___ which is ___ thick