Learn More About California State Lamp Test

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Buffpaxton888
B
Buffpaxton888
Community Contributor
Quizzes Created: 1 | Total Attempts: 4,582
| Attempts: 4,582
SettingsSettings
Please wait...
  • 1/131 Questions

    Which of the fallowing is not part of the exterior lighting

    • Dome light
    • Tail lights
    • Headlights
    • Fog lights
Please wait...
About This Quiz

This quiz focuses on the regulations and compliance for California State Lamp Adjusting Stations. It assesses knowledge on equipment requirements, licensing terms, and operational standards for vehicle lamp testing and repair, crucial for professionals in automotive maintenance and safety.

Learn More About California State Lamp Test - Quiz

Quiz Preview

  • 2. 

    Rear license plate lights are electrical tied into what lighting system

    • Tail lamp switch

    • Blinker switch

    • Flash to Pass switch

    • Fog lamp switch

    Correct Answer
    A. Tail lamp switch
    Explanation
    The correct answer is the Tail lamp switch. Rear license plate lights are typically connected to the tail lamp switch, which controls the rear lights of a vehicle. When the tail lamps are turned on, the license plate lights also illuminate, providing visibility for the license plate at night.

    Rate this question:

  • 3. 

    Stop lamps on vehicles manufactured after January 1, 1979 shall emit red light

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Vehicles manufactured after January 1, 1979 are required to have stop lamps that emit red light. This regulation ensures that other drivers on the road can easily identify when a vehicle is stopping or slowing down, promoting safety and preventing accidents.

    Rate this question:

  • 4. 

    Tail lamps on vehicles 1969 and newer must be seen within 1000 feet

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Tail lamps on vehicles 1969 and newer must be seen within 1000 feet. This statement is true. According to regulations, vehicles manufactured in 1969 and onwards are required to have tail lamps that are visible from a distance of at least 1000 feet. This is to ensure that other drivers on the road can easily see the rear of the vehicle, especially in low light or adverse weather conditions.

    Rate this question:

  • 5. 

    All aftermarket lights, bulbs, or signaling devices that are installed must be DOT approved

    • True

    • False

    Correct Answer
    A. True
    Explanation
    All aftermarket lights, bulbs, or signaling devices that are installed must be DOT approved. This means that any additional lights or bulbs that are added to a vehicle, such as fog lights or LED headlights, must meet the standards set by the Department of Transportation (DOT). These standards ensure that the lights are safe, effective, and comply with regulations for visibility and brightness. Therefore, it is true that all aftermarket lights, bulbs, or signaling devices that are installed must be DOT approved.

    Rate this question:

  • 6. 

    Lamps shall be equipped with bulbs of the correct voltage rating corresponding to the nominal voltage at the lamp socket( 85% of battery voltage or better)

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is true because lamps should be equipped with bulbs that have the correct voltage rating, which corresponds to the nominal voltage at the lamp socket. This ensures that the bulbs will operate efficiently and safely. The requirement of 85% of battery voltage or better ensures that the bulbs will not be over or underpowered, which could cause damage to the bulbs or pose a safety risk. Therefore, it is important to use bulbs with the correct voltage rating for the specific lamp socket.

    Rate this question:

  • 7. 

    The horizontal aim should be checked after each vertical adjustment and vice versa

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is true because when making adjustments to the horizontal aim, it can affect the vertical aim and vice versa. Therefore, it is important to check both aims after making adjustments to ensure that they are properly aligned. This helps in achieving accurate and precise aiming in whatever context the statement is referring to.

    Rate this question:

  • 8. 

    Before adjusting the headlight, verify that the vehicle is loaded as would normally operated on the highway.

    • True

    • False

    Correct Answer
    A. True
    Explanation
    To properly adjust the headlight, it is important to ensure that the vehicle is loaded as it would normally be operated on the highway. This is because the weight distribution of the vehicle can affect the aim and alignment of the headlights. By adjusting the headlights while the vehicle is loaded, it ensures that the headlights are properly aligned and provide optimal visibility while driving on the highway.

    Rate this question:

  • 9. 

    A headlamp beam indicator lamp (interior dash light) that does not indicate the proper beam to the drive and does not work properly. This condition will NOT cause the vehicle to fail the Lamp Inspection because it is an interior light, not exterior

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The statement is false because a headlamp beam indicator lamp that does not indicate the proper beam to the driver and does not work properly can still cause the vehicle to fail the Lamp Inspection. Although it is an interior light, it is directly related to the functioning of the exterior headlamps. Therefore, if the headlamp beam indicator lamp is not working properly, it can indicate a malfunction in the exterior headlamps, which would lead to a failed inspection.

    Rate this question:

  • 10. 

    Diffused lighting ( neon lights under the side of a vehicle) cannot obstruct the drivers view

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Diffused lighting, such as neon lights installed under the side of a vehicle, does not obstruct the driver's view. This means that even if these lights are turned on, they do not create any visual obstruction that could hinder the driver's ability to see the road and other vehicles properly. Therefore, the statement "Diffused lighting (neon lights under the side of a vehicle) cannot obstruct the driver's view" is true.

    Rate this question:

  • 11. 

    How are back up lights on most vehicles activated

    • Manual switch under the dash

    • Switch on the transmission or shifter linkage

    • Switch on the clutch linkage

    • Mercury switch activated by the vehicles rearward movement

    Correct Answer
    A. Switch on the transmission or shifter linkage
    Explanation
    The back up lights on most vehicles are activated by a switch on the transmission or shifter linkage. When the vehicle is put into reverse, the switch is triggered and sends a signal to the back up lights, causing them to turn on. This allows other drivers and pedestrians to be aware that the vehicle is moving in reverse.

    Rate this question:

  • 12. 

    Reverse lights may be

    • ONLY red

    • ONLY amber

    • ONLY white

    • Any color

    Correct Answer
    A. ONLY white
    Explanation
    Reverse lights are typically ONLY white in color. This is because white light provides the best visibility and contrast when illuminating the area behind a vehicle during reversing. The white light helps to clearly indicate the vehicle's intention to move in the opposite direction and alerts other drivers and pedestrians of its presence. Using any other color for reverse lights may not be as effective in providing the necessary visibility and could potentially confuse or mislead others on the road.

    Rate this question:

  • 13. 

    Every authorized emergency vehicle shall be equipped with at least one steady burning red warning lamp visible at least 1000 feet to the front of the vehicle

    • True

    • False

    Correct Answer
    A. True
    Explanation
    According to the given statement, every authorized emergency vehicle must have at least one steady burning red warning lamp that can be seen from a distance of at least 1000 feet in front of the vehicle. This means that the statement is true, as it is stating a requirement for emergency vehicles to have a specific type of warning lamp for visibility purposes.

    Rate this question:

  • 14. 

    Every authorized emergency vehicle may be equipped with a system which flashes the upper beam headlamps of the vehicle with the flashers occurring alternately from the front headlamps on one side of the vehicle to the front headlamp on the other side of the vehicle

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Authorized emergency vehicles are allowed to have a system that flashes the upper beam headlamps alternately from one side of the vehicle to the other. This helps to alert other drivers and pedestrians of their presence and indicates that they are responding to an emergency situation. This is a safety feature that allows emergency vehicles to be easily identified and helps to ensure the safety of both the emergency responders and the general public. Therefore, the statement is true.

    Rate this question:

  • 15. 

    Side reflectors must be between 15"-60" high off the ground

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is true because side reflectors are required to be positioned between 15"-60" high off the ground. This height range ensures that the reflectors are visible to other drivers and pedestrians, enhancing safety on the road. Reflectors placed too low may not be easily seen, while those positioned too high may not effectively reflect light back to approaching vehicles. Thus, it is necessary to adhere to the specified height range for side reflectors to fulfill their purpose effectively.

    Rate this question:

  • 16. 

    The optical aiming device requires that the vehicle be placed on a flat working area

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The optical aiming device requires that the vehicle be placed on a flat working area in order to accurately aim and align the device. Placing the vehicle on a flat surface ensures that the device is not tilted or unevenly positioned, which could affect the accuracy of the aiming. A flat working area provides a stable base for the device, allowing for precise measurements and adjustments. Therefore, the statement is true.

    Rate this question:

  • 17. 

    Offical light Stations shall not exceed the original price ( posted prices on the wall) unless authorized by the customer

    • True

    • False

    Correct Answer
    A. True
    Explanation
    This statement implies that official light stations are not allowed to charge more than the original price displayed on the wall, unless the customer has given authorization for a higher price. In other words, the price cannot be increased without the customer's consent. Therefore, the answer is true.

    Rate this question:

  • 18. 

    Stoplights are required to be working

    • Only whenever the owner sells a vehicle

    • Only if the owner chooses to use them

    • Only when a police officer requests to check them

    • Anytime the vehicle is operating/ in motion

    Correct Answer
    A. Anytime the vehicle is operating/ in motion
    Explanation
    The correct answer is "Anytime the vehicle is operating/ in motion". This means that stoplights must be working whenever the vehicle is in motion, regardless of the owner's choice, the sale of the vehicle, or a police officer's request. It is important for stoplights to be functioning properly to ensure the safety of both the driver and other road users.

    Rate this question:

  • 19. 

    If the vehicle has a third brake light, it does not need to be working for it to pass the official lamp inspection

    • True

    • False

    Correct Answer
    A. False
    Explanation
    This statement is false because if a vehicle has a third brake light, it is required to be working in order to pass the official lamp inspection. The third brake light is an important safety feature that helps to improve visibility and alert other drivers when the vehicle is braking. Therefore, it is necessary for the third brake light to be in working condition for the vehicle to pass the inspection.

    Rate this question:

  • 20. 

    Stop lamps on vehicles manufactured before January 1, 1979 shall emit red or amber light

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Vehicles manufactured before January 1, 1979 are required to have stop lamps that emit red or amber light. This means that the stop lamps on these vehicles should either emit a red light or an amber light, in accordance with the regulations. Therefore, the statement "Stop lamps on vehicles manufactured before January 1, 1979 shall emit red or amber light" is true.

    Rate this question:

  • 21. 

    Tail lamps on vehicles 1968 and older must be seen within 500 feet

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is true because according to regulations, tail lamps on vehicles manufactured in 1968 and earlier must be visible from a distance of up to 500 feet. This requirement ensures that other drivers can see the rear lights of these older vehicles clearly, enhancing safety on the road.

    Rate this question:

  • 22. 

    All fog lamps are required to be at least 12" from the ground, no more than 30" high

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Fog lamps are required to be positioned within a specific range from the ground. They must be at least 12 inches from the ground and no more than 30 inches high. This means that any fog lamps that are installed must adhere to this requirement in order to comply with regulations. Therefore, the statement is true.

    Rate this question:

  • 23. 

    A copy of each lamp certificate issued and lamp repair invoices shall be filed and retained by the station for:

    • 1 year from the date of issue

    • 2 years from the date of issue

    • 3 years from the date of issue

    • 7 years from the date of issue

    Correct Answer
    A. 3 years from the date of issue
    Explanation
    The station is required to file and retain a copy of each lamp certificate issued and lamp repair invoices for a period of 3 years from the date of issue. This is necessary for record-keeping purposes and to ensure compliance with regulations.

    Rate this question:

  • 24. 

    Tailights, stop lamps, turn signal lamps, and reflex reflectors must be mounted so the axis of the light beam is parrelel to the longitude axis of the vehicle

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is true because tailights, stop lamps, turn signal lamps, and reflex reflectors need to be mounted in a way that the axis of the light beam is parallel to the longitude axis of the vehicle. This ensures that the lights are properly aligned and visible to other drivers on the road, increasing safety and compliance with regulations.

    Rate this question:

  • 25. 

    Whenever requirement is declared as to the mounted height of lamp or reflectors, the height shall be measured from:

    • The top of the assembly

    • The bottom of the assembly

    • The center of the assembly

    • The furthest point from the right of the driver

    Correct Answer
    A. The center of the assembly
    Explanation
    The correct answer is "The center of the assembly." When measuring the height of a lamp or reflector, it should be measured from the center of the assembly. This ensures that the height is consistent and accurate, regardless of the design or shape of the assembly. Measuring from the top or bottom of the assembly may not provide an accurate representation of its actual height. Similarly, measuring from the furthest point from the right of the driver is unrelated to the height of the assembly.

    Rate this question:

  • 26. 

    Lamp adjusting aimers do not need to be calibarted in the approved work stations

    • True

    • False

    Correct Answer
    A. False
    Explanation
    Lamp adjusting aimers need to be calibrated in approved work stations.

    Rate this question:

  • 27. 

    Required lighting equipment is approved by the identification marking on the device.

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The explanation for the given correct answer is that the required lighting equipment is indeed approved by the identification marking on the device. This means that the lighting equipment has undergone a certification process and meets the necessary standards and regulations for safety and performance. The identification marking serves as evidence of this approval, ensuring that the equipment is suitable for use.

    Rate this question:

  • 28. 

    When utilizing an optical aiming device, you must set up the aiming device equipment 40 feet away from the vehicle to ensure proper aim at a distance

    • True

    • False

    Correct Answer
    A. False
    Explanation
    When utilizing an optical aiming device, it is not necessary to set up the aiming device equipment 40 feet away from the vehicle to ensure proper aim at a distance. The distance at which the aiming device should be set up may vary depending on the specific equipment being used and the requirements of the situation. Therefore, the statement is false.

    Rate this question:

  • 29. 

    The hight beam indicator on a dash does not have to work in order for the vehicle to pass the offical Lamp Inspection

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The high beam indicator on a dash does have to work in order for the vehicle to pass the official Lamp Inspection. This is because the high beam indicator is an important safety feature that alerts the driver when the high beams are on. Without a functioning indicator, the driver may unknowingly blind other drivers with the high beams, increasing the risk of accidents. Therefore, it is necessary for the high beam indicator to be in working condition for the vehicle to pass the inspection.

    Rate this question:

  • 30. 

    After each adjustment, it is recommended to pound the fender lightly with your fist to settle the aiming springs

    • True

    • False

    Correct Answer
    A. True
    Explanation
    After making adjustments to the fender, pounding it lightly with your fist helps to settle the aiming springs. This action ensures that the springs are properly aligned and in place, allowing for optimal performance and stability of the fender.

    Rate this question:

  • 31. 

    Motorcycle headlamps should be seen at 100 feet (25 mph) 200 feet (25-35 mph) and 300 feet (35-45 mph)

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Motorcycle headlamps should be seen at different distances depending on the speed at which the motorcycle is traveling. At 25 mph, the headlamp should be visible from 100 feet away. At speeds between 25-35 mph, the headlamp should be visible from 200 feet away. And at speeds between 35-45 mph, the headlamp should be visible from 300 feet away. This is important for the safety of both the motorcyclist and other drivers on the road, as it allows them to see the motorcycle from a sufficient distance and react accordingly.

    Rate this question:

  • 32. 

    An example of "diffused lighting" is neon type colored lights mounted in the fender wells or under vehicles

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Diffused lighting refers to a type of lighting that is scattered or spread out evenly in a space, reducing harsh shadows and creating a soft, ambient glow. The example given of neon type colored lights mounted in the fender wells or under vehicles is an accurate representation of diffused lighting. These lights are positioned in a way that the light is dispersed in various directions, creating a gentle illumination rather than a focused beam. Therefore, the statement "An example of 'diffused lighting' is neon type colored lights mounted in the fender wells or under vehicles" is true.

    Rate this question:

  • 33. 

    Spot beams cannot be illuminated on another moving vehicle

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Spot beams are highly focused beams of light that are used in various applications such as satellite communication and automotive headlights. These beams are designed to be directed at a specific target or area. Since spot beams are highly focused, they cannot be illuminated on another moving vehicle because the beam needs to be precisely directed towards the target. If the target is a moving vehicle, the beam would not be able to track and illuminate it accurately. Therefore, the statement is true.

    Rate this question:

  • 34. 

    Every vehicle made after January 1, 1940 must have a high beam indicator on the dash

    • True

    • False

    Correct Answer
    A. True
    Explanation
    According to the statement, every vehicle made after January 1, 1940 must have a high beam indicator on the dash. This means that it is mandatory for all vehicles manufactured after that date to have a high beam indicator. Therefore, the correct answer is True.

    Rate this question:

  • 35. 

    Headlights for motorcycles may be single or multiple beam

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is true because headlights for motorcycles can indeed be either single or multiple beam. Single beam headlights have only one bulb that produces both high and low beams, while multiple beam headlights have separate bulbs for high and low beams. The choice between single or multiple beam headlights depends on the specific design and requirements of the motorcycle.

    Rate this question:

  • 36. 

    All vehicles manufactured after January 1, 1970 shall be equipped so all tail lamps are capable of remaining lighted ( when the engine is inoperative) for what length of time?

    • 33 minutes

    • 15 minutes

    • 30 minutes

    • 60 minutes

    Correct Answer
    A. 15 minutes
    Explanation
    All vehicles manufactured after January 1, 1970 are required to have tail lamps that can remain lighted for 15 minutes when the engine is inoperative. This is a safety measure to ensure that the vehicle remains visible to other drivers in low light or dark conditions, reducing the risk of accidents.

    Rate this question:

  • 37. 

    Beginning January 1, 1969 all tail lamps must be mounted between 15"-72" off the ground

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is true because it states that beginning January 1, 1969, all tail lamps must be mounted between 15"-72" off the ground. This means that any vehicle manufactured after this date must comply with this regulation and have their tail lamps installed within this height range.

    Rate this question:

  • 38. 

    After correcting specified defects, official lamp adjusters shall certify those defects indicated on the citations or other enforcement forms have been corrected. The enforcement form must include all of the fallowing, EXCEPT

    • Date of correction

    • Station and Adjusters license numbers

    • Itemized list of parts and labor for additional problems found

    • Adjusters signature

    Correct Answer
    A. Itemized list of parts and labor for additional problems found
    Explanation
    The correct answer is "Itemized list of parts and labor for additional problems found" because the enforcement form must include the date of correction, station and adjusters license numbers, and the adjusters signature. However, it does not need to include an itemized list of parts and labor for additional problems found.

    Rate this question:

  • 39. 

    Class A official Lamp Adjusting Stations shall be equipped to test , inspect, and repair all lamps and related electrical systems on:

    • Cars and passenger trucks only

    • Heavy duty vehicles only

    • All vehicles

    • All vehicles with the exception of motorcycles

    Correct Answer
    A. All vehicles
    Explanation
    Class A official Lamp Adjusting Stations are required to have the capability to test, inspect, and repair all lamps and related electrical systems on all vehicles. This means that they must be equipped to handle cars, passenger trucks, heavy duty vehicles, and motorcycles. Therefore, the correct answer is "All vehicles."

    Rate this question:

  • 40. 

    When the Bar Representative arrives for the initial Station Lamp License inspection, the station must have all the follow EXCEPT:

    • All required signs described the CCR sec 3307

    • All tools and manuals described in CCR sec 3316

    • All necessary parts needed to perform minor replacment of light bulbs

    • An employed licensed adjuster

    Correct Answer
    A. All necessary parts needed to perform minor replacment of light bulbs
    Explanation
    The station must have all the following except the necessary parts needed to perform minor replacement of light bulbs. This means that the station is not required to have the necessary parts for replacing light bulbs during the initial Station Lamp License inspection.

    Rate this question:

  • 41. 

    Official lamp adjuster licenses issued by the BAR shall expire on the last day of the Adjuster's birth-month, and the initial license term may be valid for

    • 18-24 months, depending on the date the license was issued

    • 36-41 months, depending on the date the license was issued

    • 42-54 months, depending on the date the license was issued

    • The adjuster license does not expire

    Correct Answer
    A. 42-54 months, depending on the date the license was issued
    Explanation
    The official lamp adjuster licenses issued by the BAR have an expiration date that falls on the last day of the adjuster's birth-month. The initial license term can vary depending on the date the license was issued. The correct answer states that the initial license term may be valid for 42-54 months, depending on the date the license was issued. This means that the license can be valid for a period of time ranging from 42 to 54 months, with the specific duration determined by the date of issuance.

    Rate this question:

  • 42. 

    According to Section 3305(b) of Title 16 CCR, the lamp station must have an area for performing lamp inspections and adjustments and no other type of repair work can be performed in this area

    • True

    • False

    Correct Answer
    A. False
    Explanation
    According to Section 3305(b) of Title 16 CCR, the lamp station must have an area for performing lamp inspections and adjustments. However, it does not state that no other type of repair work can be performed in this area. Therefore, the statement is False.

    Rate this question:

  • 43. 

    If utilizing an aiming screen to perform to aiming portion of the Lamp inspection, how far from the screen must the vehicle be positioned?

    • 15 feet

    • 20 feet

    • 25 feet

    • 30 feet

    Correct Answer
    A. 25 feet
    Explanation
    The vehicle must be positioned 25 feet away from the aiming screen when utilizing it to perform the aiming portion of the Lamp inspection. This distance ensures that the aiming screen accurately reflects the alignment of the vehicle's lamps and allows for proper inspection and adjustment if necessary.

    Rate this question:

  • 44. 

    Mechanical aiming devices must be adjusted to compensate for the slope in the floor

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Mechanical aiming devices, such as laser levels or surveying equipment, are used to ensure accurate measurements and alignments. When working on a sloped floor, the devices need to be adjusted to account for the slope. This is because the slope can cause the measurements to be inaccurate if not compensated for. Therefore, it is true that mechanical aiming devices must be adjusted to compensate for the slope in the floor.

    Rate this question:

  • 45. 

    When adjusting lamps, the last adjustment made should be Counterclockwise

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The last adjustment made when adjusting lamps should be clockwise, not counterclockwise. This is because most lamps have a threaded socket, and turning the lamp counterclockwise could cause it to become loose and unstable. Turning it clockwise ensures that the lamp is securely tightened in place. Therefore, the correct answer is False.

    Rate this question:

  • 46. 

    Stop lamps on vehicles manufactured before January 1, 1979 shall emit

    • Amber or Red light

    • Amber light only

    • Red light only

    • Doesn't matter what color it is

    Correct Answer
    A. Amber or Red light
    Explanation
    Vehicles manufactured before January 1, 1979 are required to have stop lamps that emit either amber or red light. This means that the stop lamps on these vehicles can be either amber or red in color, as long as they emit one of these two colors. The specific color of the stop lamps is not specified, but it must be either amber or red.

    Rate this question:

  • 47. 

    The certificate of lamp adjustment shall be valid for

    • 15 days after issuance

    • 30 days after issuance

    • 60 days after issuance

    • 90 days after issuance

    Correct Answer
    A. 90 days after issuance
    Explanation
    The certificate of lamp adjustment is valid for 90 days after issuance. This means that the certificate remains valid for a period of 90 days from the date it is issued. After this time, the certificate will no longer be considered valid and may need to be renewed or reissued.

    Rate this question:

  • 48. 

    When RENEWING the lamp adjuster license, the license is valid for an additional

    • 2 years

    • 4 years

    • 5 years

    • The adjuster license does not expire

    Correct Answer
    A. 4 years
    Explanation
    When renewing the lamp adjuster license, the license is valid for an additional 4 years. This means that after the initial license period expires, the adjuster can renew their license and it will be valid for another 4 years. This allows the adjuster to continue practicing and providing their services for an extended period without needing to renew frequently.

    Rate this question:

  • 49. 

    Opera lights ( neon side lights on limousines) are allowed as long as they are behind the driver

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Opera lights, also known as neon side lights on limousines, are allowed as long as they are positioned behind the driver. This means that if they are installed in any other location, they would not be permitted. The statement implies that as long as the lights are placed behind the driver, they are compliant with regulations and can be used legally.

    Rate this question:

Quiz Review Timeline (Updated): Apr 24, 2024 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Apr 24, 2024
    Quiz Edited by
    ProProfs Editorial Team
  • Feb 21, 2018
    Quiz Created by
    Buffpaxton888
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.