Dgca Module 08 Online Test Quiz!
Here is a DGCA Module 08 Online Test Quiz! Are you ready to take this test? This DGCA module test has basic and hard-level questions. If you are fully aware of this topic, then you should be able to pass the test easily with a score of 80 or above. What are you waiting for? Prepare yourself for this quiz, and let's go. Don't forget to share the quiz if you like it.
Questions and Answers
- 1.
Performance of flight is affected by:
- A.
Temperature
- B.
Density
- C.
Pressure
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The correct answer is "all of the above" because temperature, density, and pressure all affect the performance of a flight. Temperature affects air density and engine efficiency. Density directly influences lift and engine thrust. Pressure variations can alter engine performance and control surface behavior.Rate this question:
-
- 2.
If the CofP of an aircraft is behind CofG, what happened to the nose?
- A.
Drops
- B.
Pitch up
- C.
Remains same
Correct Answer
A. DropsExplanation
When the Center of Pressure (CofP) of an aircraft is located behind the Center of Gravity (CofG), the nose of the aircraft drops. This means that the front part of the aircraft moves downward, causing the aircraft to pitch down. This can lead to a decrease in altitude or a descent in the aircraft's flight path. It is important to maintain proper balance between the CofP and CofG to ensure stable and controlled flight.Rate this question:
-
- 3.
In steeper turn, rudder position is taken by:
- A.
Elevator
- B.
Rudder
- C.
Aileron
Correct Answer
A. ElevatorExplanation
In a steeper turn, the rudder position is taken by the elevator. The elevator is responsible for controlling the pitch of the aircraft, which is the up and down movement. By adjusting the elevator position, the pilot can control the aircraft's angle of attack and maintain the desired altitude during the turn. The rudder, on the other hand, is primarily used for controlling the yaw of the aircraft, which is the left and right movement. Therefore, in a steeper turn, the elevator is used to maintain the desired altitude while the ailerons are used to control the roll of the aircraft.Rate this question:
-
- 4.
What is the mean sea level pressure?
- A.
1013mb
- B.
101.3 KN/m2
- C.
Both a and b
Correct Answer
C. Both a and bExplanation
The mean sea level pressure refers to the average atmospheric pressure at sea level. It is commonly measured in millibars (mb) or kilonewtons per square meter (KN/m2). Both options a and b, 1013mb and 101.3 KN/m2, represent the mean sea level pressure, making them both correct answers.Rate this question:
-
- 5.
Distance traveled by aircraft per unit fuel is:
- A.
Air specific range
- B.
Specific fuel consumption
- C.
None
Correct Answer
A. Air specific rangeExplanation
The correct answer is "Air specific range." Air specific range refers to the distance an aircraft can travel per unit of fuel consumed. It is a measure of fuel efficiency and is an important factor in determining the range and endurance of an aircraft. It takes into account various factors such as aircraft weight, engine performance, and fuel consumption rate. By maximizing the air specific range, aircraft can achieve longer flights and reduce fuel consumption.Rate this question:
-
- 6.
Longitudinal stability is affected by:
- A.
Wing
- B.
Fuselage
- C.
Hull
Correct Answer
C. HullExplanation
The hull of an aircraft refers to its main body structure. It plays a crucial role in providing stability to the aircraft, especially in longitudinal stability. The shape and design of the hull determine the distribution of weight and lift, which affects the balance and stability of the aircraft during flight. Therefore, the hull is a significant factor that affects longitudinal stability in an aircraft.Rate this question:
-
- 7.
During climbing
- A.
Lift is greater than weight.
- B.
Lift is less than weight.
- C.
Lift is equal to weight.
Correct Answer
A. Lift is greater than weight.Explanation
For an aircraft to climb, the lift generated by the wings must exceed the weight of the aircraft. This allows the aircraft to gain altitude.
During steady, level flight, lift is equal to weight. However, during climbing, lift must be greater than weight to achieve an upward trajectory.Rate this question:
-
- 8.
During takeoff, preferably aircraft will go:
- A.
Against the wind
- B.
Along with wind
- C.
None of the above
Correct Answer
A. Against the windExplanation
During takeoff, it is preferable for an aircraft to go against the wind. This is because when an aircraft takes off against the wind, it experiences an increase in airspeed relative to the ground. This increased airspeed helps to generate more lift, allowing the aircraft to take off in a shorter distance. Additionally, going against the wind provides better control and maneuverability during takeoff.Rate this question:
-
- 9.
Reynolds number
- A.
Is applicable to supersonic aircraft
- B.
Is applicable to continuous flow
- C.
Both a and b
Correct Answer
C. Both a and bExplanation
The Reynolds number can be relevant for supersonic aircraft, but its primary use is in characterizing the flow of fluids, which includes air, in different regimes. However, in supersonic flow, other dimensionless numbers like the Mach number are more directly relevant. The Reynolds number is indeed applicable to continuous flow, as it helps in determining the nature of the flow (laminar or turbulent) in a continuous fluid stream.
So, the correct answer is:
Both a and bRate this question:
-
- 10.
During equilibrium flight operation, stability depends on:
- A.
The magnitude of force applied.
- B.
Length from the C.G
- C.
Both a and b
Correct Answer
C. Both a and bExplanation
During equilibrium flight operation, stability depends on both the magnitude of force applied and the length from the center of gravity (C.G). The magnitude of force applied affects the balance and control of the aircraft, while the length from the C.G determines the aircraft's stability. Therefore, both factors are crucial in maintaining stability during equilibrium flight.Rate this question:
-
- 11.
During climbing, turn lift on an inner wing is
- A.
More
- B.
Less
- C.
Same
Correct Answer
B. LessExplanation
During climbing, turning the lift on an inner wing is less. This is because during climbing, the aircraft needs to generate more lift on the outer wing to counteract the increased load on that side. This is achieved by increasing the angle of attack on the outer wing, which in turn decreases the angle of attack on the inner wing. As a result, the lift generated on the inner wing is reduced compared to the lift on the outer wing.Rate this question:
-
- 12.
Which of the following law applies to the air?
- A.
Newton’s 1st law
- B.
Newton’s 1st & 2nd law
- C.
Newton’s 1st, 2nd & 3rd law
Correct Answer
C. Newton’s 1st, 2nd & 3rd lawExplanation
Newton's 1st law states that an object at rest will stay at rest, and an object in motion will stay in motion with the same speed and in the same direction unless acted upon by an external force. Newton's 2nd law states that the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. Newton's 3rd law states that for every action, there is an equal and opposite reaction. Since all three laws are applicable to the air, the correct answer is Newton's 1st, 2nd, & 3rd law.Rate this question:
-
- 13.
Higher Reynolds number.
- A.
Supersonic -turbojet engine
- B.
Subsonic –aircrafts
- C.
None of the above
Correct Answer
A. Supersonic -turbojet engineExplanation
The correct answer is "Supersonic - turbojet engine." A supersonic turbojet engine is capable of operating at speeds greater than the speed of sound. This type of engine is designed to handle the high pressures and temperatures associated with supersonic flight. In contrast, subsonic aircraft operate at speeds below the speed of sound and typically use different types of engines, such as turbofan engines. Therefore, the answer "Supersonic - turbojet engine" is the most appropriate choice given the options provided.Rate this question:
-
- 14.
Atmospheric pressure measured with an instrument is called
- A.
Altimeter
- B.
Anemometer
- C.
Barometer
Correct Answer
C. BarometerExplanation
Atmospheric pressure is the force exerted by the weight of the air above a certain point. A barometer is an instrument used to measure atmospheric pressure. It works by balancing the weight of the column of air above it with the weight of a column of mercury or aneroid capsules. Therefore, a barometer is the correct instrument used to measure atmospheric pressure.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jun 19, 2024Quiz Edited by
ProProfs Editorial Team -
Jul 12, 2018Quiz Created by
Senthamil Selvan
- Aptitude Test Quizzes
- Course Test Quizzes
- Driving Test Quizzes
- English Test Quizzes
- FCAT Quizzes
- General Knowledge Quizzes
- Intelligence Test Quizzes
- Medical Test Quizzes
- Mock Test Quizzes
- Philosophy Test Quizzes
- Practice Test Quizzes
- Pretest Quizzes
- Safety Test Quizzes
- Skill Assessment Quizzes
- Spelling Test Quizzes
- Standardized Test Quizzes
Back to top