Sematec VMware Vsphere 6.5 Quiz
These 10 questions will test the most important parts of the lesson, and you will get a lower score of 70, you need to study this lesson.
- 1.
Which two Identity Sources are available to add for vCenter Single Sign-On authentication?(Choose two.)
- A.
LocalOS
- B.
OpenLDAP
- C.
NIS as an LDAP Server
- D.
VCMSDS
Correct Answer(s)
A. LocalOS
B. OpenLDAPExplanation
The correct answer is LocalOS and OpenLDAP. LocalOS refers to the local operating system, which means that users can authenticate using the credentials of the operating system where vCenter is installed. OpenLDAP is an open-source implementation of the Lightweight Directory Access Protocol (LDAP) and can be used as an identity source for authentication in vCenter. NIS as an LDAP Server and VCMSDS are not valid identity sources for vCenter Single Sign-On authentication.Rate this question:
-
- 2.
An administrator is configuring the Failover Order option on a vSphere Distributed Switch.Which two options should be used with IP-hash load balancing? (Choose two.)
- A.
Active Uplinks
- B.
Standby Uplinks
- C.
Unused Uplinks
- D.
Override Failover Order
Correct Answer(s)
A. Active Uplinks
C. Unused UplinksExplanation
When using IP-hash load balancing on a vSphere Distributed Switch, the administrator should use the "Active Uplinks" option. This ensures that all active uplinks are utilized for load balancing. Additionally, the "Unused Uplinks" option should also be used to include any uplinks that are not currently being used. This allows for efficient load distribution across all available uplinks in the network. The "Standby Uplinks" option is not used with IP-hash load balancing, as it is only used for failover purposes. The "Override Failover Order" option is also not relevant in this scenario.Rate this question:
-
- 3.
Which three conditions would prevent Storage I/O Control from being enabled on a groupof datastores? (Choose three.)
- A.
The datastores planned for the solution are used by different vSphere clusters.
- B.
A datastore planned for the solution is configured as a Raw Device Mapping file.
- C.
A datastore planned for the solution has three extents.
- D.
A datastore planned for the solution is configured as NFS.
- E.
The organization has an Enterprise license.
Correct Answer(s)
B. A datastore planned for the solution is configured as a Raw Device Mapping file.
C. A datastore planned for the solution has three extents.
E. The organization has an Enterprise license.Explanation
The three conditions that would prevent Storage I/O Control from being enabled on a group of datastores are:
1. A datastore planned for the solution is configured as a Raw Device Mapping file. Raw Device Mapping files do not support Storage I/O Control.
2. A datastore planned for the solution has three extents. Storage I/O Control does not support datastores with multiple extents.
3. The organization has an Enterprise license. Storage I/O Control is only available with Enterprise Plus licenses.Rate this question:
-
- 4.
A virtual machine is experiencing performance issues. The following performance metricsare observed:✑ CPU usage value for the virtual machine is above 90%✑ CPU ready value for the virtual machine is above 20%Which two activities will likely resolve the performance issues? (Choose two.)
- A.
Set a CPU reservation for the virtual machine.
- B.
Increase the CPU limit on the virtual machine.
- C.
Decrease CPU shares equally for all virtual machines on the host.
- D.
Increase CPU shares equally for all virtual machines on the host.
Correct Answer(s)
A. Set a CPU reservation for the virtual machine.
B. Increase the CPU limit on the virtual machine.Explanation
Setting a CPU reservation for the virtual machine ensures that a certain amount of CPU resources are always available for it, which can help improve its performance. Increasing the CPU limit on the virtual machine allows it to use more CPU resources when needed, which can also help resolve the performance issues. Both of these activities aim to allocate more CPU resources to the virtual machine, thereby addressing the high CPU usage and CPU ready values observed.Rate this question:
-
- 5.
What is true regarding datastores on ESXi 6.x?
- A.
NFS 4.1 datastore does not support Fault Tolerance (FT)
- B.
VMFS3 and VMFS5 datastores can be newly created
- C.
NFS datastore can be concurrently mounted using NFS 4.1 on one host and NFS on another
- D.
NFS 3.0 datastore does not support Fault Tolerance (FT)
Correct Answer
A. NFS 4.1 datastore does not support Fault Tolerance (FT)Explanation
NFS 4.1 datastore does not support Fault Tolerance (FT). This means that if an ESXi host using NFS 4.1 datastore fails, Fault Tolerance cannot be used to automatically switch to a secondary host without any downtime. FT is a feature that provides continuous availability for virtual machines by creating a secondary copy of the VM that runs on a different host. However, NFS 4.1 does not support this feature, so FT cannot be used with NFS 4.1 datastores.Rate this question:
-
- 6.
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)
- A.
Remote Storage has been disconnected.
- B.
Installation media is available.
- C.
Server hardware clock is set to UTC.
- D.
Storage has been partitioned with a VMFS volume.
- E.
Network cards have been setup to use Jumbo Frames.
Correct Answer(s)
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.Explanation
The three items that should be validated prior to installing ESXi 6.x are: Remote Storage has been disconnected, Installation media is available, and Server hardware clock is set to UTC. These validations ensure that the installation process can proceed smoothly. Disconnecting remote storage helps prevent any potential data loss during the installation. Having the installation media available is necessary to initiate the installation process. Setting the server hardware clock to UTC ensures that time synchronization will work correctly after the installation.Rate this question:
-
- 7.
Which two badges are major badges in vRealize Operations? (Choose two.)
- A.
Risk
- B.
Efficency
- C.
Workload
- D.
Faults
Correct Answer(s)
A. Risk
B. EfficencyExplanation
The correct answer is Risk and Efficiency. In vRealize Operations, Risk and Efficiency are considered major badges. The Risk badge helps identify potential risks and issues in the environment, allowing for proactive management and mitigation. The Efficiency badge focuses on optimizing resource utilization and improving overall performance. These badges are crucial in ensuring the smooth functioning and optimization of vRealize Operations.Rate this question:
-
- 8.
An administrator is moving a virtual machine into a resource pool. The VM and resourcepool are configured as shown:VM configuration:✑ 2GHz CPU reservation✑ 1GB Memory limitResource Pool configuration:✑ 6GHz CPU reservation✑ 1GB Memory reservation✑ No limit to memoryWhat happens to the virtual machine's resource settings when it is moved into the pool?
- A.
The VM inherits the resource settings of the resource pool if expandable reservations is enabled.
- B.
The VM's reservations and limits are ignored and removed.
- C.
The VM keeps the 2GHz CPU reservation but receives the 1GB memory reservation.
- D.
The VM keeps the 2GHz CPU reservation and the 1GB Memory limit. question_answerVIEW ANSWER
Correct Answer
D. The VM keeps the 2GHz CPU reservation and the 1GB Memory limit. question_answerVIEW ANSWERExplanation
When the virtual machine is moved into the resource pool, it will keep its 2GHz CPU reservation and the 1GB Memory limit. This means that the virtual machine will continue to have a guaranteed allocation of 2GHz CPU and a maximum limit of 1GB memory, regardless of the resource pool's settings.Rate this question:
-
- 9.
An organization has a number of virtual machines that would benefit from Fault Tolerance.These include:✑ A single vCPU Apache Server✑ A dual vCPU vCenter Server✑ A quad vCPU SQL Server✑ An eight vCPU Hadoop ServerWhich two virtual machines can be configured to use VMware Fault Tolerance? (Choosetwo.)
- A.
Apache Server
- B.
VCenter Server
- C.
SQL Server
- D.
Hadoop Server
Correct Answer(s)
A. Apache Server
C. SQL ServerExplanation
The Apache Server and SQL Server can be configured to use VMware Fault Tolerance because they have a single vCPU and quad vCPU respectively. VMware Fault Tolerance is designed to provide continuous availability for virtual machines with up to 4 vCPUs, making both of these virtual machines eligible for this feature. The vCenter Server and Hadoop Server cannot be configured for Fault Tolerance as they have dual vCPUs and eight vCPUs respectively, exceeding the limit for this feature.Rate this question:
-
- 10.
Which two SMTP Notification Event Details are specific to alarms triggered by events?(Choose two.)
- A.
User Name
- B.
Summary
- C.
Old Status
- D.
Target
Correct Answer(s)
A. User Name
B. SummaryExplanation
The SMTP Notification Event Details that are specific to alarms triggered by events are User Name and Summary. The User Name provides information about the user associated with the event, while the Summary gives a brief overview or description of the event that triggered the alarm. These details help in identifying and understanding the specific events that caused the alarm to be triggered.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Jul 03, 2017Quiz Created by
Asgari.sematec
Back to top