NORAC Operating Rules Quiz

The given statement is true because job briefings are meant to ensure that all employees involved in a task have a clear understanding of the information covered. It is important for all employees to acknowledge their understanding to ensure that there are no misunderstandings or miscommunication that could lead to errors or accidents. By confirming that all employees have acknowledged their understanding, it helps to create a safer and more efficient work environment.

The given statement states that all Train and Engine service employees who need to coordinate with two or more employees must perform a job briefing before starting their job and each train assignment. This means that it is required for these employees to have a clear understanding of the task and how it should be done. Therefore, the answer "True" is correct as it aligns with the statement provided.

The statement is true because fusees, which are flares used to warn or signal, can cause fire damage to bridges or other structures if left unattended. Therefore, it is important to not place fusees on such structures to prevent potential damage.

The given statement is true. According to the explanation provided, the engine whistle or horn signal must be prolonged or repeated until the engine occupies the crossing. This means that the signal should continue until the engine has completely passed through the crossing. Additionally, for multiple crossings, the signal should be prolonged or repeated until the last crossing is occupied. This ensures that all crossings are properly alerted to the presence of the engine.

The given statement is true. An engine whistle or horn signal is a succession of sounds used as an alarm when there are persons or livestock on the track at locations other than highway crossings at grade. This signal is important to alert people and animals of an approaching train and to prevent accidents.

The hand signal being described in the question is when the hand is swung horizontally at a right angle to the track. This hand signal indicates a stop.

The given statement states that employees are prohibited from tampering with appliances and other equipment, unless they have specific authorization to do so. This implies that breaking seals on interlocking appliances or altering the normal intended function of any device or equipment is not allowed without authorization. Therefore, the correct answer is true, indicating that the statement is accurate.

Auxiliary lights on an engine must be functioning properly before the engine departs from its initial terminal. These lights must also be visible when the engine is approaching and operating over public highway crossings at grade. Therefore, the statement is true.

According to the given information, when a Conductor Flagman is in charge of a track and a secondary employee wants to use that track, a job briefing is required between the Flagman and the secondary employee. This briefing can be done face to face, or if not practical, through radio or telephone communication. Therefore, the statement "True" is correct as it aligns with the requirement mentioned in the job briefing.

The statement is true because it states that flags of the prescribed color must be used during the day and lights of the prescribed color must be used during the night. This implies that there are specific colors designated for flags and lights, and they should be used accordingly depending on the time of day.

Night signals must always be used from sunset to sunrise because during this time, visibility is reduced and it is harder for other drivers and pedestrians to see vehicles on the road. Night signals, such as headlights and taillights, are designed to increase visibility and ensure the safety of everyone on the road. Using night signals during the specified time period helps to prevent accidents and allows other road users to easily identify and react to the presence of vehicles.

The given statement is true because it states that all Rail employees governed by the Employee Timetable Schedules must carry a copy of the Timetable Schedule Bulletin pertaining to them while on duty. This implies that it is a requirement for these employees to have a copy of the bulletin with them while working.

The statement is true because "workmen" refers to employees who are assigned to inspect, test, repair, or service engines and/or cars. This means that the blue signal protection of workers applies to these employees, providing them with safety measures and precautions while performing their duties.

The statement is true because job briefings are necessary when employees need to coordinate with each other. These briefings ensure that all employees are aware of the operational and safety conditions before, during, and after their duties. This helps in promoting effective communication, coordination, and safety in the workplace.

The statement suggests that if someone waves any object violently on or near the track, it is a signal to stop. This implies that there is a specific protocol in place for communication using hand signals in the context of the track. Therefore, the correct answer is True.

The given statement states that job briefings should be conducted face to face, and if that is not practical or possible, radio or intercom can be used. This means that the statement is true, as it provides alternative methods for conducting job briefings when face to face interaction is not feasible.

Job briefings SHOULD be conducted face to face, but MAY be held via radio or telephone WHEN A FACE TO FACE BRIEFING IS NOT PRACTICAL OR POSSIBLE.

The given statement is true. According to the procedures and restrictions for the protection of Utility Employees, the Conductor or Engineer must notify each crew member of the presence and identity of the Utility Employee before authorizing them to work as part of the crew. Communication must also be maintained to ensure that each crew member understands the duties to be performed and any potential risks involved. Therefore, the statement is correct.

The indication of the hand signal "Raised and lowered vertically" is to proceed. This means that it is safe for the person giving the signal and others to continue with their actions or movements. The hand signal is used to communicate this message clearly, especially in situations where verbal communication may not be possible or effective.

The statement states that before starting each tour of duty, employees must set their watch with a standard clock. If they do not have access to a standard clock, they must compare watches with another employee who has determined the correct time. This implies that it is necessary for employees to ensure that their watches are synchronized with a standard clock or with another employee who has already done so. Therefore, the correct answer is True.

Auxiliary lights are considered operative when they illuminate after the engine horn and/or bell is sounded or the auxiliary light switch is activated. This means that the auxiliary lights are meant to be used in conjunction with the horn, bell, or a separate switch, indicating that they are additional lights that can be activated when needed. Therefore, the statement "Auxiliary lights are considered operative when they illuminate after the engine horn and/or bell is sounded or the auxiliary light switch is activated" supports the answer "True".

An illuminated marking device is required en route and must be tested before a train leaves its initial terminal. Additionally, the proper functioning of the device must be confirmed at all crew change locations. This suggests that the statement is true.

The explanation for the given correct answer is that the dispatcher should not consider Bulletin Orders or Division Notices as effective at a Bulletin Board location until they are informed that they have been properly posted. This implies that the dispatcher should only rely on information that has been officially communicated to them, rather than assuming that posted notices are automatically valid. Therefore, the statement is true.

A train or track car must not be operated without a red flag, white light, and at least 6 fusees. This is important for signaling purposes to ensure the safety of the train or track car and to alert other individuals of its presence. The red flag, white light, and fusees serve as visual indicators to warn others of the train or track car's presence and to prevent accidents or collisions.

If a train has more than one engine unit and they are headed in opposite directions, it is important for the conductor to have an understanding with his crew before any movement is made. This is because the engines need to be coordinated in order to ensure safe and efficient operation. Therefore, the statement is true.

The correct answer is a white light and fusee. This is because during night time, visibility is reduced, and a white light is used to signal the presence of flaggers to oncoming traffic. The fusee is also used as a visual signal to indicate caution. Therefore, combining a white light and fusee ensures that both visual signals are present and effectively communicate the presence of flaggers to drivers.

The explanation for the correct answer is that if there is doubt concerning the meaning of a signal or for whom the signal was intended, it is necessary to stop the movement to ensure safety. Additionally, if the signal disappears from view, it is important to stop the movement as the communication may no longer be clear or valid. These conditions indicate that there is a potential risk or confusion regarding the signals being given, and stopping the movement is the appropriate action to take.

Employees MUST carry the SIBO with them while on duty.

Contractors are required to attend a Contractor Safety Training Course before the expiration date on their ID Card. This suggests that their qualifications need to be updated and refreshed regularly. The word "annually" indicates that the training course must be attended once every year to maintain their qualifications.

The correct answer is True because the engine horn must be sounded at all crossings, whether they are public or private, unless there are specific instructions stating otherwise. This is done to alert pedestrians and vehicles of the approaching train and ensure safety at the crossing.

When a hand signal is held horizontally at arm's length, it indicates the need to reduce speed. This signal is commonly used in situations where there is a need to slow down, such as when approaching a curve, a pedestrian crossing, or a hazard on the road. It is important for drivers to recognize and respond to hand signals in order to ensure safety on the road.

Blue Signal protection must be provided for workers when they are replacing, repositioning, or repairing markers, and the rear of the train is on any track. This means that when workers are performing these tasks and the rear of the train is on the track, blue signal protection is required to ensure the safety of the workers. Therefore, the statement "Blue Signal Protection of Workers - Markers: Blue Signal protection must be provided for workmen when they are replacing, repositioning or repairing markers, and the rear of the train is on any track" is true.

The correct answer is 7. The safety Job Briefing Form must be retained and held available for inspection for a period of 7 days, then send to the Line's Assistant Superintendent's Office or General Superintendent's Office in the case of Hoboken Division Employees.

In a situation where the Blue Signal is unavailable for emergency repair work on engines and/or cars, the Engineer must be notified. The Engineer must then take three actions to ensure the safety of workers. Firstly, they must apply the brakes to prevent any movement of the equipment. Secondly, they must place the reverser level in the neutral position or the controller in the off position to ensure that the equipment remains stationary. Lastly, if the equipment is equipped with a generator field and/or control switch, the Engineer must open it to ensure that the equipment is not energized. These actions must be maintained until the employee who requested the protection notifies the Engineer that it is no longer required.

If a train encounters an unattended fusee burning on a track, it must stop and proceed at Restricted Speed until the head end is 1 mile beyond the fusee.

When approaching a public highway-rail crossing at grade and seeing a whistle sign displaying "W" or "W/MX," or other specified aspect, with the engine in front, the engineer should start the whistle signal at least 15 seconds but not more than 20 seconds before occupying the crossing.

The correct answer is 2 because if a station stop is not made and the train is 2 miles from any of the locations noted, the Engineer must contact the Conductor and discuss the method of operation through the area. This implies that if the train is any distance other than 2 miles from the locations, the Engineer does not need to contact the Conductor.

When a hand signal is held at arm's length above the head while the train is standing, it indicates the action of releasing the air brakes. This signal is used to communicate to other train crew members or personnel on the ground that the air brakes should be released, allowing the train to start moving again.

When requested to provide protection for workers, the employee in charge of remotely controlled switches must align the switches with the movement of the track and apply blocking devices. This ensures the safety of workers by preventing unauthorized movement of equipment and providing clear indication of protection.

When cars are pushed by an engine at night, a white light must be displayed on the front of the leading car. This is to ensure visibility and safety for other vehicles and pedestrians on the track. However, this requirement does not apply when shifting or making up trains in yards, as these activities are typically done at lower speeds and in a controlled environment where the risk of collision is reduced. Therefore, the statement is true.

Blue Signal Protection of Workers requires that when workmen are inspecting markers by repositioning the activation switch or covering the photoelectric cell, and the rear of the train is on a track other than a main track or controlled siding, blue signal protection must be provided. This means that it is necessary to have blue signals in place to warn other train operators of the presence of workers on the tracks. Therefore, the statement is true.

Employees who are responsible for giving signals need to have the appropriate equipment readily available. This equipment should be maintained in good order, meaning it should be in proper working condition and well-maintained. This ensures that the equipment is reliable and can be used immediately when needed.

The given correct answer is true. When crews on other trains hear an engine whistle or horn signal, they must stop until it is safe to proceed. This signal is used to communicate important information and ensure the safety of all trains on the tracks. It alerts other crews to potential hazards or situations that require caution. Therefore, it is necessary for crews to stop and wait for further instructions before proceeding.

General Orders, Bulletin Orders, and Division Notices will be numbered consecutively, meaning they will be assigned numbers in a sequential order without any gaps. This numbering system allows for easy organization and reference of these orders and notices. Additionally, each document will contain a subheading indicating the territory in which they apply, further assisting in their proper categorization and understanding.

A train must not be stopped over a burning fusee if it can be avoided. If so stopped, THE FUSEE MUST BE EXTINGUISHED.

The correct answer is that the public grade crossing is equipped with automatic flashing lights and gates and the gates are fully lowered, and there are no conflicting highway movements approaching the public grade crossing. This means that if the crossing has safety measures in place such as flashing lights and lowered gates, and there are no vehicles approaching the crossing, the train or engine can sound the whistle for less than 15 seconds when stopping at the location. This ensures that the train or engine is alerting any pedestrians or vehicles of its presence while also taking into account the safety measures in place.

not-available-via-ai

The explanation for the correct answer is that the Summary Bulletin Orders are usually issued weekly effective 12:01 AM on Saturday.

The engine bell does not need to be sounded in cases where there is a momentary stop and start, forward and backward movement in a switching operation that does not involve crossing a public highway at grade, unless there are Roadway Workers in the area.

Employees whose duties are affected by the Timetable must use a reliable watch. This means that employees who have specific tasks or responsibilities that are time-sensitive and dependent on the Timetable need to have a watch that can be trusted to accurately tell the time. A reliable watch ensures that employees can effectively manage their time and fulfill their duties according to the Timetable.