OSI Model And TCP/IP Model Quiz Questions

Approved & Edited by ProProfs Editorial Team

The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.

Learn about Our Editorial Process

| By Iihtkuchaman

Iihtkuchaman

Community Contributor

Quizzes Created: 1 | Total Attempts: 6,234

Questions: 50 | Attempts: 6,242 | Updated: Aug 20, 2024

Questions

Settings

Feedback

During the Quiz End of Quiz

Play as

Quiz Flashcard

Create your own Quiz

OSI Model And TCP/IP Model Quiz Questions - Quiz

Questions and Answers

1.

Data transferred in the Data Link Layer is in the form
- A.
  
  Physical
- B.
  
  Transport
- C.
  
  Network Network layer
- D.
  
  MAC sublayer of the data link layer
Correct Answer
C. Network Network layer

Explanation
correct! Routing is a functin of the network layer.

Rate this question:

1
1
2.

Which of the following are benefits of using a layered network model? A . it specifies how changes to one layer must be propagated through the other layers B . it facilitates troubleshooting C . it focuses on details rather than general functions of networking D . it breaks the complex process of networking into more manageable chunks E . it allows layers developed by different vendors to interoperate.
- A.
  
  Data link layer
- B.
  
  Transport layer
- C.
  
  Physical layer
- D.
  
  Application layer
Correct Answer
D. Application layer

Explanation
The correct answer is D. it breaks the complex process of networking into more manageable chunks. The layered network model breaks down the overall networking process into different layers, each with its own specific function. This allows for easier troubleshooting, as issues can be isolated to a specific layer. It also allows for easier interoperability between different vendors, as each layer can be developed independently.

Rate this question:

1
7
3.

Which of the following are benefits of using a layered network model? A . it specifies how changes to one layer must be propagated through the other layers B . it facilitates troubleshooting C . it focuses on details rather than general functions of networking D . it breaks the complex process of networking into more manageable chunks E . it allows layers developed by different vendors to interoperate.
- A.
  
  A and B only
- B.
  
  B, D, and E
- C.
  
  A and C only
- D.
  
  All of the above
Correct Answer
B. B, D, and E

Explanation
A layered network model provides several benefits. One benefit is that it facilitates troubleshooting by dividing the network into different layers, making it easier to identify and isolate problems. Another benefit is that it breaks down the complex networking process into more manageable chunks, allowing for easier understanding and implementation. Additionally, a layered network model allows for interoperability between layers developed by different vendors, promoting compatibility and flexibility in network design and implementation. Therefore, the correct answer is B, D, and E.

Rate this question:
4.

What are the OSI layers above and below the Session layer
- A.
  
  Application, presentation, session, transport, network, data link, physical
- B.
  
  Session, presentation, data transport, MAC, network, physical
- C.
  
  Physical, data link, network, transport, session, presentation, application
- D.
  
  Presentation, application, session, network, transport, data link, physical
Correct Answer
A. Application, presentation, session, transport, network, data link, pHysical

Explanation
The correct answer is application, presentation, session, transport, network, data link, physical. The OSI model is a conceptual framework used to understand how different network protocols and technologies interact with each other. The Session layer is responsible for establishing, managing, and terminating sessions between applications. Above the Session layer are the Presentation layer, which handles data formatting and encryption, and the Application layer, which includes all user applications. Below the Session layer are the Transport layer, responsible for reliable data delivery, the Network layer, responsible for addressing and routing, the Data Link layer, responsible for framing and error detection, and the Physical layer, which deals with the physical transmission of data.

Rate this question:

0
4
5.

What are the OSI layer above and below the Session layer.
- A.
  
  Application and Physical layer
- B.
  
  Application and Session layer
- C.
  
  Presentation and Transport layer
- D.
  
  Transport and Physicl layer
Correct Answer
C. Presentation and Transport layer

Explanation
The correct answer is Presentation and Transport layer. The Presentation layer is above the Session layer in the OSI model, responsible for data formatting, encryption, and compression. The Transport layer is below the Session layer and is responsible for reliable end-to-end delivery of data, including segmentation and reassembly of data packets.

Rate this question:

1
1
6.

What is the command that could be test connectivity?
- A.
  
  Network and Physical layer
- B.
  
  Application and Session layer
- C.
  
  Presentation and Transport layer
- D.
  
  Transport and Physical layer
Correct Answer
A. Network and pHysical layer

Explanation
The command used to test connectivity, such as ping, operates at the Network layer (Layer 3) and interacts with the Physical layer (Layer 1) to verify the connectivity between two devices. The ping command sends ICMP Echo Request packets to the target host and waits for Echo Reply packets to determine if the target is reachable. This process relies on both the Network layer for addressing and routing and the Physical layer for actual data transmission.

Rate this question:

0
0
7.

Which IEEE standard is also known as Logical Link Control?
- A.
  
  Http
- B.
  
  Telnet
- C.
  
  Ping
- D.
  
  None
Correct Answer
C. Ping

Explanation
The correct answer is Ping. Ping is a utility used to test the reachability of a network host and to measure the round-trip time for messages sent from the originating host to a destination computer. It is not an IEEE standard, but it is commonly referred to as Logical Link Control because it operates at the network layer and is responsible for establishing and maintaining a link between network devices.

Rate this question:

1
0
8.

Which of the following components are included in any physical connectivity problems (choose two)
- A.
  
  IEEE 802.1
- B.
  
  IEEE 802.2
- C.
  
  IEEE 802.3
- D.
  
  IEEE 802.5
Correct Answer
B. IEEE 802.2

Explanation
IEEE 802.2 is one of the components included in any physical connectivity problems. This is because IEEE 802.2 is a standard that defines the Logical Link Control (LLC) sublayer of the data link layer in the OSI model. The LLC sublayer is responsible for managing communication between devices on a local network. Therefore, if there are any physical connectivity problems, such as issues with cables or network ports, the IEEE 802.2 component would be affected.

Rate this question:

2
4
9.

In what layer of the OSI model is the data received from the Network layer and divided into distinct frames which can then be transmitted by the Physical layer?
- A.
  
  Hubs
- B.
  
  Routers
- C.
  
  Nics
- D.
  
  Switches
Correct Answer(s)
C. Nics
D. Switches

Explanation
In the OSI model, the Data Link layer (Layer 2) is responsible for receiving data from the Network layer (Layer 3) and dividing it into frames for transmission over the Physical layer (Layer 1). Network Interface Cards (NICs) and switches operate at the Data Link layer:
NICs (Network Interface Cards): These devices receive data from the Network layer, encapsulate it into frames, and then pass it to the Physical layer for transmission.
Switches: These devices operate primarily at the Data Link layer, where they forward frames based on MAC addresses.

Rate this question:

0
0
10.

Which layer of the OSI model is responsible for error checking?
- A.
  
  Transport
- B.
  
  Network
- C.
  
  Session
- D.
  
  Data link
Correct Answer
D. Data link

Explanation
In the Data link layer for the OSI model, error checking is accomplished by the Data link protocol. This layer is responsible for the reliable transmission of data between adjacent network nodes. Error checking mechanisms such as checksums or cyclic redundancy checks (CRC) are implemented at this layer to detect and correct errors that may occur during data transmission. The Data link layer ensures that the data is delivered without any errors or corruption, providing a reliable communication channel between connected devices.

Rate this question:

1
0
11.

Which of the following operate at the presentation layer?
- A.
  
  3- byte Frame check sequence (FCS)
- B.
  
  4- byte Frame check sequence (FCS)
- C.
  
  5- byte Frame check sequence (FCS)
- D.
  
  6- byte Frame check sequence (FCS)
Correct Answer
B. 4- byte Frame check sequence (FCS)
12.

Error detection and recovery takes place at which layer?
- A.
  
  Transport
- B.
  
  Presentation
- C.
  
  Data link
- D.
  
  Netwrok
Correct Answer
A. Transport

Explanation
Error detection and recovery takes place at the transport layer. This layer is responsible for ensuring reliable and error-free communication between the source and destination systems. It provides mechanisms for detecting errors in the data transmission, such as checksums, and can also recover from errors by retransmitting lost or corrupted data. Additionally, the transport layer handles flow control and congestion control to ensure efficient and smooth data transfer.

Rate this question:

1
0
13.

Which layer handles the formatting of application data so that it will be readable by the destination system?
- A.
  
  Application
- B.
  
  Presentation
- C.
  
  Transport
- D.
  
  netwrok
- E.
  
  Data link
Correct Answer
B. Presentation

Explanation
The presentation layer handles the formatting of application data so that it will be readable by the destination system. This layer is responsible for translating the data into a format that can be understood by the receiving system, including tasks such as data compression, encryption, and decryption. By performing these functions, the presentation layer ensures that the data is properly formatted and can be interpreted correctly by the destination system.

Rate this question:
14.

The network layer uses physical addresses to route data to destination hosts.
- A.
  
  True
- B.
  
  False
Correct Answer
B. False

Explanation
The network layer does not use physical addresses to route data to destination hosts. Instead, it uses logical addresses, such as IP addresses, to identify and route data packets. Physical addresses, also known as MAC addresses, are used at the data link layer to identify network interface cards (NICs) within a local network. The network layer relies on logical addressing schemes to ensure that data is correctly routed across different networks.

Rate this question:

2
0
15.

Most logical addresses are present in network interface cards at the factory
- A.
  
  True
- B.
  
  False
Correct Answer
B. False

Explanation
The statement that most logical addresses are present in network interface cards at the factory is false. Logical addresses, such as IP addresses, are assigned to devices by network administrators or through dynamic allocation protocols like DHCP. These addresses are not typically pre-installed on network interface cards during the manufacturing process.

Rate this question:

4
0
16.

What are the sublayers of the data link layer?
- A.
  
  MAC and IPX
- B.
  
  Hardware and frame
- C.
  
  MAC and LLC
- D.
  
  WAN and LAN
- E.
  
  Mac address
Correct Answer
C. MAC and LLC

Explanation
The sublayers of the data link layer are MAC (Media Access Control) and LLC (Logical Link Control). The MAC sublayer is responsible for controlling access to the network media and handling the physical addressing of devices. The LLC sublayer is responsible for managing the flow of data between the network layer and the MAC sublayer, providing error detection and correction, and handling frame synchronization.

Rate this question:
17.

Select two Application layer protocols used to send and receive files via TCP/IP: (choose 2)
- A.
  
  Telnet
- B.
  
  Ftp
- C.
  
  Ntp
- D.
  
  Tftp
Correct Answer(s)
B. Ftp
D. Tftp

Explanation
FTP (File Transfer Protocol) and TFTP (Trivial File Transfer Protocol) are both application layer protocols used to send and receive files via TCP/IP. FTP is a standard protocol that allows for the transfer of files between a client and a server over a network. It provides reliable and secure file transfer capabilities. TFTP, on the other hand, is a simpler protocol that is primarily used for transferring small files and is often used in situations where simplicity and speed are more important than advanced features and security. Both protocols are widely used in networking and file transfer applications.

Rate this question:
18.

What does NTP stand for ?
- A.
  
  News Transfer Protocol
- B.
  
  News protocol Protocol
- C.
  
  Network Time Protocol
- D.
  
  Name Tranport Protocol
Correct Answer
C. Network Time Protocol

Explanation
Network Time Protocol (NTP) is a networking protocol designed for clock synchronization between computer systems over packet-switched, variable-latency data networks. NTP is one of the oldest internet protocols still in use and is essential for maintaining the accuracy of system clocks in servers, workstations, and other networked devices.

Rate this question:

1
0
19.

Which layer falls between the Presentation layer and the Transport Layer?
- A.
  
  Application
- B.
  
  Session
- C.
  
  Physical
- D.
  
  Network
Correct Answer
B. Session

Explanation
The layer that falls between the Presentation layer and the Transport layer is the Session layer. The Session layer is responsible for establishing, managing, and terminating connections between applications. It provides services such as session establishment, maintenance, and synchronization. This layer ensures that data is transmitted securely and reliably between applications by managing the sessions between them.

Rate this question:

1
0
20.

Transport layer protocols that establish a connection with another node before they begin transmitting data are known as :
- A.
  
  Connectionless protocols
- B.
  
  Syn-oriented protocols
- C.
  
  Connection-oriented protocols
- D.
  
  Ack-oriented protocols
Correct Answer
C. Connection-oriented protocols

Explanation
Connection-oriented protocols establish a connection with another node before transmitting data. This means that a connection is first established between the sender and receiver, and then data is transmitted over this connection. This allows for reliable and ordered delivery of data, as the connection ensures that data is not lost or corrupted during transmission. Examples of connection-oriented protocols include TCP (Transmission Control Protocol), which is widely used in the internet for reliable data transmission.

Rate this question:

1
0
21.

What can be said about TCP/IP ?
- A.
  
  TCP/IP comprises of several subprotocols
- B.
  
  TCP/IP comprises of only one protocols
- C.
  
  TCP/IP has been replaced by ARP
- D.
  
  TCP/IP has been replaced by IPX/SPX
Correct Answer
A. TCP/IP comprises of several subprotocols

Explanation
TCP/IP comprises of several subprotocols, which work together to enable communication over the internet. These subprotocols include TCP (Transmission Control Protocol) and IP (Internet Protocol), among others. TCP is responsible for breaking data into packets, ensuring their reliable delivery, and reassembling them at the destination. IP handles the addressing and routing of these packets across different networks. Additionally, TCP/IP also includes protocols like UDP (User Datagram Protocol) for faster but less reliable communication, and ICMP (Internet Control Message Protocol) for error reporting and diagnostic functions. Overall, TCP/IP is a suite of protocols that work together to facilitate communication on the internet.

Rate this question:

1
0
22.

A network layer protocols that reports on the success or failure of data delivery is :
- A.
  
  IP
- B.
  
  TCP
- C.
  
  ARP
- D.
  
  ICMP
Correct Answer
D. ICMP

Explanation
ICMP (Internet Control Message Protocol) is a network layer protocol that is responsible for reporting on the success or failure of data delivery in a network. It works by sending error messages and operational information to indicate any issues encountered during the transmission of data packets. ICMP is commonly used by network devices to diagnose network connectivity problems, measure round-trip times, and report errors such as unreachable hosts or network congestion. Therefore, ICMP is the correct answer as it specifically deals with reporting the success or failure of data delivery.

Rate this question:

1
0
23.

Encryption takes place at which layer?
- A.
  
  Application
- B.
  
  Presentation
- C.
  
  Session
- D.
  
  Transport
Correct Answer
B. Presentation

Explanation
Encryption takes place at the presentation layer of the OSI model. This layer is responsible for formatting and encrypting data to be sent across the network. It ensures that the data is in a format that the receiving system can understand and decrypt. Encryption at this layer provides a secure way of transmitting sensitive information over the network, protecting it from unauthorized access.

Rate this question:

2
0
24.

Error detection and recovery takes place at which layer?
- A.
  
  Transport
- B.
  
  Presentation
- C.
  
  Data link
- D.
  
  Application
- E.
  
  Network
Correct Answer
A. Transport

Explanation
Error detection and recovery takes place at the transport layer. This layer is responsible for ensuring the reliable delivery of data between two devices on a network. It provides error detection mechanisms such as checksums to detect errors in the data being transmitted. In case errors are detected, the transport layer also includes error recovery mechanisms such as retransmission of lost or corrupted data. Therefore, the correct answer is transport.

Rate this question:

3
0
25.

Which layer establishes, maintains, and terminates communications between applications located on different devices?
- A.
  
  Application
- B.
  
  Presentation
- C.
  
  Session
- D.
  
  Network
Correct Answer
C. Session

Explanation
The session layer is responsible for establishing, maintaining, and terminating communications between applications located on different devices. It manages the sessions by handling the session setup, synchronization, and teardown processes. This layer ensures that the data exchange between the applications is reliable and orderly. It also provides services like session checkpointing and recovery in case of failures.

Rate this question:
26.

IP is implemented at which OSI model layer?
- A.
  
  Transport
- B.
  
  Session
- C.
  
  Data link
- D.
  
  Network
Correct Answer
D. Network

Explanation
IP (Internet Protocol) is implemented at the network layer of the OSI model. This layer is responsible for routing and forwarding data packets across different networks. IP provides the addressing and routing functionality, allowing data to be sent from the source to the destination by determining the most efficient path. It works in conjunction with other protocols at the network layer, such as ICMP (Internet Control Message Protocol), to ensure reliable and efficient data transmission. Therefore, the correct answer is network.

Rate this question:

1
0
27.

Which layer handles the formatting of application data so that it will be readable by the destination system?
- A.
  
  Application
- B.
  
  Presentation
- C.
  
  Session
- D.
  
  Transport
Correct Answer
B. Presentation

Explanation
The presentation layer handles the formatting of application data so that it will be readable by the destination system. This layer is responsible for translating the data into a format that can be understood by the receiving system, including tasks such as data encryption, compression, and decompression. It ensures that the data is properly formatted and presented to the application layer for further processing.

Rate this question:

1
0
28.

Packets are found at which layer?
- A.
  
  Data link
- B.
  
  Transport
- C.
  
  Network
- D.
  
  Session
Correct Answer
C. Network

Explanation
Correct ! The network layer forms frames from the data link layer into packets.

Rate this question:

1
0
29.

Which layer translates between physical (MAC) and logical addresses?
- A.
  
  Network
- B.
  
  Data link
- C.
  
  Transport
- D.
  
  Physical
Correct Answer
A. Network

Explanation
The network layer is responsible for translating between physical (MAC) addresses and logical addresses. This layer adds logical addresses to packets, allowing them to be routed through different networks. It also determines the best path for data transmission and handles network congestion. Therefore, the network layer is the correct answer for this question.

Rate this question:

2
0
30.

Bit synchronization is handled at which layer?
- A.
  
  Data link
- B.
  
  Transport
- C.
  
  Session
- D.
  
  Physical
Correct Answer
D. pHysical

Explanation
Bit synchronization refers to the process of ensuring that the sender and receiver of data are synchronized in terms of the timing of the bits being transmitted. This synchronization is crucial for accurate and reliable data transmission. The physical layer of the OSI model is responsible for the transmission of raw bit streams over a physical medium, such as cables or wireless signals. Therefore, it is the physical layer that handles bit synchronization, ensuring that the sender and receiver are in sync with each other.

Rate this question:

1
1
31.

Bridges operate at which layer of the OSI model?
- A.
  
  Physical
- B.
  
  Data link
- C.
  
  Transport
- D.
  
  Network
Correct Answer
B. Data link

Explanation
Bridges operate at the data link layer of the OSI model. This layer is responsible for the reliable transfer of data between adjacent network nodes and provides error detection and correction. Bridges are used to connect two or more local area networks (LANs) and forward data packets between them based on their MAC addresses. They examine the destination MAC address of incoming packets and forward them only to the appropriate LAN, improving network efficiency and reducing congestion.

Rate this question:
32.

Which of the following protocols are examples of TCP/ IP transport layer protocols?
- A.
  
  Ethernet
- B.
  
  HTTP
- C.
  
  IP
- D.
  
  UDP
- E.
  
  PPP
- F.
  
  SMTP
Correct Answer
D. UDP

Explanation
UDP (User Datagram Protocol) is an example of a TCP/IP transport layer protocol. UDP is a connectionless protocol that provides a simple and lightweight method for sending datagrams across an IP network. It does not provide reliable delivery of data, as it does not establish a connection or perform error checking. UDP is commonly used for applications that require fast and efficient transmission of data, such as streaming media, online gaming, and real-time communication.

Rate this question:

2
1
33.

Which OSI layer defines the functions of logical network-wide addressing and routing?
- A.
  
  LAYER 1
- B.
  
  LAYER 2
- C.
  
  LAYER 3
- D.
  
  LAYER 4
- E.
  
  LAYER 5
Correct Answer
C. LAYER 3

Explanation
Layer 3 of the OSI model, known as the Network layer, is responsible for logical network-wide addressing and routing. This layer handles the delivery of data packets across different networks, ensuring that they are properly addressed and routed to their intended destinations. It uses logical addresses, such as IP addresses, to identify and route data between different networks.

Rate this question:

1
0
34.

Which of the following protocols are examples of TCP/IP network access layer protocols? ( Choose two )
- A.
  
  Ethernet
- B.
  
  HTTP
- C.
  
  UDP
- D.
  
  TCP
- E.
  
  IP
- F.
  
  SMTP
- G.
  
  PPP
Correct Answer(s)
A. Ethernet
G. PPP

Explanation
Ethernet and PPP are examples of TCP/IP network access layer protocols. Ethernet is a widely used protocol for connecting devices in a local area network (LAN), while PPP (Point-to-Point Protocol) is a protocol used to establish a direct connection between two nodes in a network. Both protocols are essential for the communication between devices at the network access layer in the TCP/IP protocol stack.

Rate this question:

3
1
35.

The process of a web server adding a TCP header to a web page, followed by adding an IP header, and then a data link header and trailer is an example of what ?
- A.
  
  Data Encapsulation
- B.
  
  Same-Layer interaction
- C.
  
  The OSI model
- D.
  
  All of these answers are correct.
Correct Answer
A. Data Encapsulation

Explanation
The process described in the question is an example of data encapsulation. Data encapsulation refers to the process of adding headers and trailers to the original data as it moves through different layers of the network protocol stack. In this case, the TCP header, IP header, and data link header and trailer are added successively, encapsulating the original web page data. This process allows the data to be properly formatted and transmitted across the network.

Rate this question:
36.

Which OSI layer defines the standards for cabling and connection ?
- A.
  
  Layer 1
- B.
  
  Layer 2
- C.
  
  Layer 3
- D.
  
  Layer 4
Correct Answer
A. Layer 1

Explanation
Layer 1 of the OSI model, also known as the Physical layer, is responsible for defining the standards for cabling and connection. This layer deals with the physical transmission of data over the network, including the types of cables, connectors, and electrical signals used. It ensures that the data is properly transmitted and received between devices by establishing and maintaining the physical connection.

Rate this question:

2
0
37.

Which of the following terms are valid terms for the names of the Seven OSI layers ?
- A.
  
  Application
- B.
  
  Data Link
- C.
  
  Transmission
- D.
  
  Presentation
- E.
  
  Internet
- F.
  
  Session
Correct Answer(s)
A. Application
B. Data Link
D. Presentation
F. Session

Explanation
The terms "Application," "Data Link," "Presentation," and "Session" are all valid names for specific OSI layers. "Transmission" and "Internet" are not OSI layer names; "Transmission" might refer to aspects of the Transport layer, and "Internet" corresponds to the Network layer in the OSI model, but it is not the correct name for any specific layer.

Rate this question:

2
0
38.

Which one of the following networking terms is not associated with the same OSI layer as the others?
- A.
  
  Router
- B.
  
  Packets
- C.
  
  Tcp
- D.
  
  Ip
Correct Answer
C. Tcp

Explanation
TCP runs at the Transport layer of the OSI model. The other three terms are associated with the Network layer. The Network layer is sometimes referred to as the "routing layer".

Rate this question:
39.

What is the Protocol Data Unit (PDU) employed at the Data Link Layer?
- A.
  
  Bits
- B.
  
  Frames
- C.
  
  Packets
- D.
  
  Segments
Correct Answer
B. Frames

Explanation
At the Data Link Layer, the Protocol Data Unit (PDU) employed is frames. Frames are the units of data that are transmitted over the network at this layer. They contain the necessary control information, such as source and destination addresses, error detection, and flow control. Frames are used to encapsulate the data received from the Network Layer and prepare it for transmission across the physical network.

Rate this question:

1
0
40.

Which layers of the OSI model are included in the lower layers?
- A.
  
  Application, Session, Presentation
- B.
  
  Physical, Transport, Data link, network
- C.
  
  Data link, physical, Network
- D.
  
  Session, Data link, Physical
Correct Answer
B. pHysical, Transport, Data link, network

Explanation
The lower layers of the OSI model include the Physical, Transport, Data link, and Network layers. These layers are responsible for the physical transmission of data, error detection and correction, and routing of data packets across networks. The Application, Session, and Presentation layers are part of the upper layers of the OSI model, which focus on the interaction between the user and the network.

Rate this question:

2
0
41.

Which layer uses the Segments as a Protocol Data Unit (PDU)?
- A.
  
  Network
- B.
  
  Physical
- C.
  
  Data link
- D.
  
  Transport
Correct Answer
D. Transport

Explanation
The Transport layer uses Segments as a Protocol Data Unit (PDU). The Transport layer is responsible for the reliable delivery of data across a network. It takes data from the upper layers and breaks it into smaller segments. These segments are then transmitted over the network and reassembled at the receiving end. By using segments as PDUs, the Transport layer ensures that the data is properly organized and delivered to the correct destination.

Rate this question:

1
0
42.

Identify the order of the 5 step encapsulation? 1. Create the segment 2. Convert the Frame to bits 3. Create the packet 4. Create the frame 5. user creats the data
- A.
  
  1,2,4,2,5
- B.
  
  2,1,3,4,5,
- C.
  
  5,1,3,4,2,
- D.
  
  5,3,4,1,2,
Correct Answer
C. 5,1,3,4,2,
43.

Whera is encapsulation used in the osi model?
- A.
  
  All seven layers of the receiving station
- B.
  
  At peer layers of the sending station and receiving station
- C.
  
  Only at the Network layer
- D.
  
  At the sending Station
Correct Answer
D. At the sending Station

Explanation
Encapsulation is used in the OSI model at the sending station. This process involves adding protocol-specific headers and trailers to the data at each layer of the model. These headers and trailers contain necessary information for the data to be transmitted across the network. At the sending station, the data is encapsulated with these headers and trailers before being passed down to the lower layers. This ensures that the data is properly packaged and prepared for transmission.

Rate this question:

1
1
44.

Midi and Mpeg are the examples of the osi seven layer model?
- A.
  
  Application
- B.
  
  Session
- C.
  
  Presentation
- D.
  
  Network
Correct Answer
C. Presentation

Explanation
Midi and Mpeg are examples of file formats used for audio and video, respectively. These file formats are not directly related to the OSI seven layer model. The presentation layer in the OSI model is responsible for formatting and presenting data to the application layer, but it does not specifically deal with audio or video file formats. Therefore, the correct answer is presentation.

Rate this question:
45.

Which OSI layer incorporates the MAC address and the LLC ?
- A.
  
  Data link
- B.
  
  Network
- C.
  
  Physical
- D.
  
  Transport
Correct Answer
A. Data link

Explanation
The correct answer is Data link. The Data link layer of the OSI model is responsible for the reliable transmission of data between two nodes on a network. It incorporates both the Media Access Control (MAC) address, which is a unique identifier assigned to network interfaces, and the Logical Link Control (LLC), which manages the flow of data between devices. This layer ensures that data is properly formatted and error-free before it is transmitted to the physical layer for actual transmission over the network.

Rate this question:

2
0
46.

Identify the purpose of ICMP?
- A.
  
  Avoiding routing loops
- B.
  
  Send error and control messages
- C.
  
  Transporting routing updates
- D.
  
  Collision detection
Correct Answer
B. Send error and control messages

Explanation
ICMP (Internet Control Message Protocol) is a network protocol that is used to send error and control messages between network devices. These messages are essential for the proper functioning of the network, as they provide feedback about the status and availability of network resources. ICMP messages are used to report errors, such as unreachable hosts or network congestion, and to provide information about network conditions, such as the time it takes for a packet to reach its destination. Therefore, the purpose of ICMP is to send error and control messages.

Rate this question:

2
0
47.

Which of the following functions is not performed by TCP?
- A.
  
  Flow control
- B.
  
  Sequencing
- C.
  
  Error checking
- D.
  
  Subnetting
Correct Answer
D. Subnetting

Explanation
TCP (Transmission Control Protocol) is responsible for ensuring reliable communication between devices over a network. It performs various functions such as flow control, sequencing, and error checking. However, subnetting is not a function performed by TCP. Subnetting is a process of dividing a network into smaller subnetworks for efficient routing and addressing purposes. This task is typically handled by the network layer protocols such as IP (Internet Protocol), not TCP.

Rate this question:

2
0
48.

A traffic light is an example of what type of mechanism?
- A.
  
  Collision detection
- B.
  
  Flow control
- C.
  
  Sequence numbering
- D.
  
  Network management
Correct Answer
B. Flow control

Explanation
A traffic light is an example of flow control because it regulates the flow of traffic at an intersection. It controls when each direction of traffic is allowed to proceed, ensuring a smooth and organized movement of vehicles. Flow control mechanisms are used in various systems to manage the flow of data, resources, or events, and in the case of a traffic light, it controls the flow of vehicles to prevent collisions and maintain order on the road.

Rate this question:

3
0
49.

Windowing is a type of?
- A.
  
  Negative acknowledgement
- B.
  
  Address resolution
- C.
  
  Layer transition mechanism
- D.
  
  Flow control
Correct Answer
D. Flow control

Explanation
Windowing is a type of flow control mechanism used in computer networks. It allows the sender to control the amount of data that can be sent before receiving an acknowledgement from the receiver. This helps in optimizing the network performance by preventing congestion and ensuring efficient transmission of data.

Rate this question:

1
0
50.

Identify the purpose of ARP?
- A.
  
  Avoiding routing loops
- B.
  
  DEtermining a workstation's IP address
- C.
  
  Sending a directed broadcast
- D.
  
  Determining a workstation's MAC address
Correct Answer
D. Determining a workstation's MAC address

Explanation
ARP (Address Resolution Protocol) is used to determine a workstation's MAC address. MAC addresses are unique identifiers assigned to network devices, and ARP helps in mapping an IP address to its corresponding MAC address. When a device wants to communicate with another device on the same network, it needs to know the MAC address of the destination device. ARP allows the device to send an ARP request asking "Who has this IP address?" and the device with that IP address responds with its MAC address. This information is crucial for establishing a direct connection between devices on a local network.

Rate this question:

1
0

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Aug 20, 2024

Quiz Edited by
ProProfs Editorial Team
Nov 14, 2010

Quiz Created by
Iihtkuchaman

OSI Model And TCP/IP Model Quiz Questions

Data transferred in the Data Link Layer is in the form

What are the OSI layers above and below the Session layer

What are the OSI layer above and below the Session layer.

What is the command that could be test connectivity?

Which IEEE standard is also known as Logical Link Control?

Which of the following components are included in any physical connectivity problems (choose two)

In what layer of the OSI model is the data received from the Network layer and divided into distinct frames which can then be transmitted by the Physical layer?

Which layer of the OSI model is responsible for error checking?

Which of the following operate at the presentation layer?

Error detection and recovery takes place at which layer?

Which layer handles the formatting of application data so that it will be readable by the destination system?

The network layer uses physical addresses to route data to destination hosts.

Most logical addresses are present in network interface cards at the factory

What are the sublayers of the data link layer?

Select two Application layer protocols used to send and receive files via TCP/IP: (choose 2)

What does NTP stand for ?

Which layer falls between the Presentation layer and the Transport Layer?

Transport layer protocols that establish a connection with another node before they begin transmitting data are known as :

What can be said about TCP/IP ?

A network layer protocols that reports on the success or failure of data delivery is :

Encryption takes place at which layer?

Error detection and recovery takes place at which layer?

Which layer establishes, maintains, and terminates communications between applications located on different devices?

IP is implemented at which OSI model layer?

Which layer handles the formatting of application data so that it will be readable by the destination system?

Packets are found at which layer?

Which layer translates between physical (MAC) and logical addresses?

Bit synchronization is handled at which layer?

Bridges operate at which layer of the OSI model?

Which of the following protocols are examples of TCP/ IP transport layer protocols?

Which OSI layer defines the functions of logical network-wide addressing and routing?

Which of the following protocols are examples of TCP/IP network access layer protocols? ( Choose two )

The process of a web server adding a TCP header to a web page, followed by adding an IP header, and then a data link header and trailer is an example of what ?

Which OSI layer defines the standards for cabling and connection ?

Which of the following terms are valid terms for the names of the Seven OSI layers ?

Which one of the following networking terms is not associated with the same OSI layer as the others?

What is the Protocol Data Unit (PDU) employed at the Data Link Layer?

Which layers of the OSI model are included in the lower layers?

Which layer uses the Segments as a Protocol Data Unit (PDU)?

Identify the order of the 5 step encapsulation? 1. Create the segment 2. Convert the Frame to bits 3. Create the packet 4. Create the frame 5. user creats the data

Whera is encapsulation used in the osi model?

Midi and Mpeg are the examples of the osi seven layer model?

Which OSI layer incorporates the MAC address and the LLC ?

Identify the purpose of ICMP?

Which of the following functions is not performed by TCP?

A traffic light is an example of what type of mechanism?

Windowing is a type of?

Identify the purpose of ARP?