Physics Of Sound Post-test Johnson
The hills may be alive with the sound of music, but it’s the sound of just about anything we’re concerned with in this quiz! What do you know about sound and its physical properties? Let’s take a look.
- 1.
Being able to tell different sounds apart is called
- A.
Sound amplification
- B.
Sound discrimination
- C.
Vibration
- D.
Frequency
Correct Answer
B. Sound discriminationExplanation
Sound discrimination refers to the ability to differentiate between different sounds. It involves the process of perceiving and recognizing the unique characteristics of each sound, such as pitch, tone, and rhythm. This cognitive skill allows individuals to distinguish and identify various sounds in their environment, including speech sounds, musical notes, and environmental noises. Sound discrimination is essential for language development, communication, and auditory processing. It helps individuals to understand and interpret the world around them through the auditory sense.Rate this question:
-
- 2.
When you make sounds by plucking a rubber band, you make the rubber band move back and forth very quickly. This movement is called
- A.
Loudness
- B.
Amplitude
- C.
Pitch
- D.
Vibration
Correct Answer
D. VibrationExplanation
When a rubber band is plucked, it creates a rapid back and forth movement. This movement is known as vibration. The sound produced by the vibrating rubber band is what we hear. Loudness refers to the volume or intensity of sound, amplitude is the measure of the maximum displacement of a vibrating object, and pitch is the perceived frequency of a sound.Rate this question:
-
- 3.
THe highness or lowness of a sound is the
- A.
Pitch
- B.
Loudness
- C.
Vibration
- D.
Resonance
Correct Answer
A. PitchExplanation
Pitch refers to the highness or lowness of a sound. It is determined by the frequency of the sound waves, where higher frequencies result in higher pitch and lower frequencies result in lower pitch. Pitch is a perceptual attribute of sound and is related to the frequency of the sound wave.Rate this question:
-
- 4.
If you tighten a string and keep plucking it with your finger as you pull, what happens to the pitch?
- A.
As you tighten the string, the pitch gets lower
- B.
The pitch stays the same
- C.
As you tighten the string, the pitch gets higher
- D.
You can't tell unless you try it
Correct Answer
C. As you tighten the string, the pitch gets higherExplanation
When you tighten a string, you increase its tension. This increased tension causes the string to vibrate at a higher frequency, resulting in a higher pitch. Therefore, as you tighten the string and pluck it, the pitch will get higher.Rate this question:
-
- 5.
The loudness of a sound is called
- A.
The sound wave
- B.
The volume
- C.
The amplitude
- D.
The pitch
Correct Answer
B. The volumeExplanation
The correct answer is "the volume". The loudness of a sound refers to the volume of the sound. Volume is a measure of the intensity or strength of a sound wave, indicating how loud or soft a sound is perceived by the human ear. It is determined by the amplitude of the sound wave, with higher amplitudes corresponding to louder sounds and lower amplitudes corresponding to softer sounds. Therefore, the term "volume" accurately describes the loudness of a sound.Rate this question:
-
- 6.
A student holds two vibrating objects. Object A is vibrating faster than object B. Which statement is true?
- A.
A is louder than B
- B.
B is louder than A
- C.
A will have a higher pitch than B
- D.
B will have a higher pitch than A
Correct Answer
C. A will have a higher pitch than BExplanation
When an object vibrates faster, it means that it is producing more vibrations per second. This results in a higher frequency of sound waves being produced. Pitch is determined by the frequency of sound waves, so when object A is vibrating faster than object B, it will have a higher pitch than object B.Rate this question:
-
- 7.
The same sound will seem louder if it travels through which of the following?
- A.
Solid objects
- B.
Liquids
- C.
Air
- D.
Solids, liquids and gases will sound the same
Correct Answer
A. Solid objectsExplanation
Sound travels faster and more efficiently through solid objects compared to liquids and gases. When sound waves travel through solid objects, the particles in the object are closer together, allowing for more efficient transmission of the sound waves. This results in the sound appearing louder when it travels through solid objects.Rate this question:
-
- 8.
If you roll a large sheet of paper into a funnel, you can hear the sound better. This process of increasing the loudness of a sound is called
- A.
Measuring a wave
- B.
Absorption
- C.
Reflection
- D.
Amplification
Correct Answer
D. AmplificationExplanation
When a large sheet of paper is rolled into a funnel shape, it creates a structure that can collect and focus sound waves. This funnel shape helps to direct and concentrate the sound waves towards a specific point, making the sound louder and more audible. This process of increasing the loudness of a sound by directing and concentrating the sound waves is called amplification.Rate this question:
-
- 9.
Which of the following would produce the hightest pitch?
- A.
Phone
- B.
Whistle
- C.
Truck horn
- D.
Dog's growl
Correct Answer
B. WhistleExplanation
The whistle would produce the highest pitch because it is designed to create a high-frequency sound. The other options, such as the phone, truck horn, and dog's growl, typically produce lower-pitched sounds.Rate this question:
-
- 10.
Which of the following would produce the loudest sound?
- A.
Jet plane
- B.
Pin falling
- C.
Doorbell
- D.
Whisper
Correct Answer
A. Jet planeExplanation
A jet plane would produce the loudest sound among the given options. Jet planes are known for their powerful engines and high speeds, which generate a significant amount of noise. The sound produced by a jet plane can reach extremely high decibel levels, especially during takeoff and landing. In comparison, a pin falling, doorbell, and whisper would not produce as loud of a sound as a jet plane.Rate this question:
-
- 11.
A unit for measuring the loudness of sounds is
- A.
Vibration
- B.
Decibel
- C.
Frequency
- D.
Pitch
Correct Answer
B. DecibelExplanation
The correct answer is decibel. Decibel is a unit used to measure the loudness of sounds. It is a logarithmic scale that quantifies the intensity or power of a sound wave. The decibel scale is commonly used in fields such as acoustics and audio engineering to compare and evaluate the relative loudness of different sounds. Vibration, frequency, and pitch are related to sound but do not specifically measure loudness.Rate this question:
-
- 12.
A process for locating distant or invisible objects by using sound waves that are reflected back to the sender
- A.
Vibration
- B.
Receiver
- C.
Echolocation
- D.
Source
Correct Answer
C. EcholocationExplanation
Echolocation is a process used to locate distant or invisible objects by emitting sound waves and then listening for their reflection. This technique is commonly used by animals such as bats and dolphins to navigate and find prey. The sender, in this case, is the source of the sound waves, while the receiver refers to the animal or device that detects the reflected waves. Echolocation relies on the principle of vibration, as the sound waves create vibrations that bounce off objects and return to the sender, allowing them to determine the location and characteristics of the objects.Rate this question:
-
- 13.
The speed at which something vibrates is called
- A.
Pitch
- B.
Amplitude
- C.
Resonance
- D.
Frequency
Correct Answer
D. FrequencyExplanation
Frequency is the correct answer because it refers to the speed at which something vibrates. It specifically measures the number of vibrations or cycles that occur in a given time period. Pitch refers to the perceived frequency of a sound, amplitude refers to the magnitude or strength of a vibration, and resonance refers to the natural frequency at which an object vibrates.Rate this question:
-
- 14.
Something that detects sound is a
- A.
Sound wave
- B.
Volume
- C.
Amplitude
- D.
Sound receiver
Correct Answer
D. Sound receiverExplanation
A sound receiver is a device or mechanism that is designed to detect and receive sound. It can refer to various devices such as microphones, speakers, or even the human ear. These receivers are capable of capturing sound waves and converting them into electrical signals or vibrations that can be perceived or reproduced as sound. Therefore, a sound receiver is the most appropriate option among the given choices to describe something that detects sound.Rate this question:
-
- 15.
An object or material that vibrates in a way that makes sound is called the
- A.
Sound source
- B.
Receiver
- C.
Sound wave
- D.
Pitch
Correct Answer
A. Sound sourceExplanation
A sound source refers to an object or material that vibrates in a way that produces sound. It is responsible for creating the sound waves that travel through a medium, such as air or water, and can be perceived by a receiver, such as our ears. The sound source is the origin of the sound and is essential for the production of any audible sound.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Mar 18, 2013Quiz Created by
Sbandres
- Acceleration Quizzes
- Acoustic Quizzes
- Chapters Of Physics Quizzes
- Light And Reflection Quizzes
- Logic Gate Quizzes
- Magnetic Field Quizzes
- Momentum Quizzes
- Motion Quizzes
- Online Physics Quizzes
- Optics Quizzes
- Practice Physics Quizzes
- Properties Of Matter Quizzes
- Quantum Quizzes
- Quantum Physics Quizzes
- Reflection Quizzes
- Refraction Quizzes
- Secondary 3 Physics Quizzes
- Sound Quizzes
- Speed Of Light Quizzes
- Thermodynamics Quizzes
- Velocity Quizzes
- Work And Energy Quizzes
Back to top