Router Safety Test
Test for router safety knowledge
- 1.
Which way do you move the router across the wood?
- A.
Left to right
- B.
Right to left
- C.
Top to bottom
- D.
Bottom to top
- E.
All of the above
Correct Answer
A. Left to rightExplanation
The correct answer is left to right because when using a router on wood, it is common practice to move the router in a left to right motion. This allows for smoother and more controlled cuts, as the rotation of the router bit is in a clockwise direction. Moving the router in the opposite direction (right to left) can cause tear-out and result in rougher edges. Moving the router from top to bottom or bottom to top is not typically done when routing wood, as it can lead to uneven cuts and instability. Therefore, the correct way to move the router across the wood is left to right.Rate this question:
-
- 2.
You should always _________ the machine to make adjustments or check the security of the blade.
- A.
Stop
- B.
Disconnect
- C.
Move
- D.
Turn off
- E.
Take apart
Correct Answer
B. DisconnectExplanation
To make adjustments or check the security of the blade, it is important to disconnect the machine. Disconnecting the machine ensures that there is no power supply to the blade, reducing the risk of accidental activation or injury. It also allows for a safer and more thorough inspection or adjustment process without any potential hazards.Rate this question:
-
- 3.
Always keep hands _______ when blade is turning.
- A.
Clean
- B.
Away from the machine
- C.
On the machine handles
- D.
On cutterhead
- E.
None of the above
Correct Answer
C. On the machine handlesExplanation
It is important to always keep hands on the machine handles when the blade is turning to ensure safety and prevent any accidents. This allows for better control and stability while operating the machine. Keeping hands clean or away from the machine may be important for hygiene or safety reasons, but it is not directly related to the turning blade. Placing hands on the cutterhead is dangerous and can result in serious injuries. Therefore, the correct answer is to keep hands on the machine handles.Rate this question:
-
- 4.
Other students should always be ______ during router operation.
- A.
Talking
- B.
Helping
- C.
Working
- D.
Cutting
- E.
Kept away from the area
Correct Answer
E. Kept away from the areaExplanation
During router operation, it is important to keep other students away from the area. This is because routers can be dangerous and pose a risk of injury if not handled properly. By keeping other students away, the chances of accidents or distractions are minimized, ensuring a safer working environment.Rate this question:
-
- 5.
Safety glasses are EXTREMELY important because the router produces a lot of _______
- A.
Flying chips
- B.
Flying sawdust
- C.
Heat
- D.
Metal pieces
- E.
Decorative shapes
Correct Answer
A. Flying chipsExplanation
Safety glasses are extremely important because the router produces a lot of flying chips. When using a router, the cutting action of the tool can cause small pieces of material to be thrown into the air, which can pose a risk to the eyes. Wearing safety glasses helps to protect the eyes from these flying chips and prevents potential eye injuries.Rate this question:
-
- 6.
The _____ must be kept clear of the cutter (blade) at all times
- A.
Wood
- B.
Table
- C.
Cord
- D.
Clamp
- E.
Cutterhead
Correct Answer
C. CordExplanation
The cord must be kept clear of the cutter (blade) at all times to avoid any accidents or damage. It is important to ensure that the cord is not in the path of the cutter to prevent it from getting entangled or cut by the blade. This precaution is necessary to maintain a safe working environment and prevent any potential hazards.Rate this question:
-
- 7.
Why is this guy not ready to use the router??
- A.
His long hair is not tied back
- B.
He is wearing a ring
- C.
He has a lot of dangling jewelry
- D.
His "safety eye patch" is not approved eyewear
- E.
All of the above
Correct Answer
E. All of the aboveExplanation
The guy is not ready to use the router because his long hair is not tied back, he is wearing a ring, he has a lot of dangling jewelry, and his "safety eye patch" is not approved eyewear. All of these factors can pose a safety hazard when operating machinery, especially a router.Rate this question:
-
- 8.
Make sure blade ________ before removing hands from handles.
- A.
Is sharp
- B.
Is stopped
- C.
Hits stock
- D.
Is secure
- E.
Is the correct shape
Correct Answer
B. Is stoppedExplanation
Before removing hands from handles, it is important to ensure that the blade is stopped. This is necessary for safety reasons as a moving blade can cause serious injury. By making sure the blade is stopped, the risk of accidental contact with the blade is minimized, allowing for safe removal of hands from the handles.Rate this question:
-
- 9.
Keep Router _____ flat against stock when routing. Do Not tilt router.
- A.
base
- B.
Switch
- C.
Blade
- D.
Height adjustment
- E.
Lock
Correct Answer
A. baseExplanation
When routing, it is important to keep the router base flat against the stock. Tilting the router can cause uneven cuts and may result in damage to the stock or the router itself. Therefore, it is crucial to maintain the base in a flat position to ensure accurate and smooth routing.Rate this question:
-
- 10.
Before using the router students must:
- A.
Check bit security
- B.
Warn students to stay away
- C.
Make all adjustments
- D.
Get permission to use machine
- E.
All of the above
Correct Answer
E. All of the aboveExplanation
The correct answer is "all of the above" because before using the router, students must check the bit security to ensure it is safe to use, warn other students to stay away from the machine for their safety, make any necessary adjustments to the router settings, and obtain permission to use the machine to ensure proper usage and accountability.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Sep 15, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 24, 2009Quiz Created by
Frankpritchett
Back to top