Shop Safety Awareness Quiz!
(212).jpg "Shop Safety Awareness Quiz! - Quiz")
.
Questions and Answers
- 1.
The following behaviors are not permitted in the shop.
- A.
Running
- B.
Wrestling, boxing or touching other people
- C.
Napping
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The correct answer is "All of the above" because the question states that the following behaviors are not permitted in the shop, which includes running, wrestling, boxing or touching other people, and napping. Therefore, all of these behaviors are prohibited in the shop.Rate this question:
-
- 2.
If at any time you are unsure about a safety-procedure you should ask?
- A.
A friend in the class
- B.
The custodian
- C.
The instructor
- D.
The principal
Correct Answer
C. The instructorExplanation
When unsure about a safety procedure, it is best to ask the instructor. The instructor is responsible for teaching and guiding the class, including safety protocols. They have the knowledge and expertise to provide accurate and reliable information regarding safety procedures. Asking a friend in the class may not guarantee accurate information, as they may not have the same level of knowledge or understanding. The custodian and principal may not be directly involved in the class or have specific knowledge of the safety procedures being taught. Therefore, the instructor is the most appropriate person to ask in such situations.Rate this question:
-
- 3.
Safety glasses are to be worn at all times in the shop.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Safety glasses are required to be worn at all times in the shop to protect the eyes from potential hazards such as flying debris, chemicals, or projectiles. Wearing safety glasses ensures the safety and well-being of individuals working in the shop by minimizing the risk of eye injuries. Therefore, it is important to always wear safety glasses while in the shop.Rate this question:
-
- 4.
Stains and finishes should be applied to the work tables.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because stains and finishes should not be applied to work tables. Work tables are typically used for tasks that involve cutting, hammering, or other activities that may damage or stain the surface. Applying stains and finishes to work tables would not only be unnecessary but also impractical as these treatments may not withstand the wear and tear of regular use. It is more appropriate to use durable and easy-to-clean materials for work tables instead.Rate this question:
-
- 5.
Open toed shoes are appropriate in the shop.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Open-toed shoes are not appropriate in a shop because they do not provide adequate protection for the feet. In a shop environment, there may be heavy objects, sharp tools, or chemicals that can pose a safety hazard. Closed-toed shoes are recommended as they offer more protection against potential injuries. Therefore, the statement that open-toed shoes are appropriate in the shop is false.Rate this question:
-
- 6.
PPE in the shop stands for?
- A.
Paper, pencil, eraser
- B.
Popcorn, pepsi, early release
- C.
Personal, protective, equipment
- D.
Non of the above
Correct Answer
C. Personal, protective, equipmentExplanation
The correct answer is "Personal, protective, equipment." PPE refers to the gear or clothing that is worn to protect individuals from potential hazards or injuries in the workplace or other environments. It includes items such as helmets, gloves, masks, goggles, and safety vests. This equipment is essential for ensuring the safety and well-being of individuals in various industries and settings.Rate this question:
-
- 7.
All of the following are examples of the golden rules of woodshop safety except?
- A.
10 inch rule
- B.
4 inch rule
- C.
Full speed ahead
- D.
Unplug or get slugged
- E.
12 inch rule
- F.
Gaps are bad
- G.
Hands inside the ride
- H.
Know before you start
- I.
Concentration
Correct Answer
A. 10 inch ruleExplanation
The given options are all examples of safety rules in a woodshop except for the "10 inch rule". This rule is not commonly known or recognized as a safety guideline in woodworking. The other options, such as the "4 inch rule", "Unplug or get slugged", "Hands inside the ride", and "Know before you start" are all commonly known safety rules in a woodshop. "Full speed ahead", "12 inch rule", "Gaps are bad", and "Concentration" are not specific safety rules, but they still promote safe practices in a woodshop.Rate this question:
-
- 8.
Always use a bench brush when moving scraps from the machine.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Using a bench brush when moving scraps from the machine is a good practice because it helps to keep the work area clean and prevents debris from accumulating. This can contribute to a safer working environment by reducing the risk of slips, trips, and falls caused by loose materials on the floor. Additionally, using a brush instead of hands or other tools can minimize the chances of injury or damage to the machine or the person handling the scraps. Therefore, it is advisable to always use a bench brush when moving scraps from the machine.Rate this question:
-
- 9.
When finished using any hand tools it is important to return them to their proper place.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Returning hand tools to their proper place after use is important for several reasons. Firstly, it helps to maintain a clean and organized workspace, making it easier to find and access tools when needed. Additionally, it promotes safety by reducing the risk of accidents caused by misplaced or forgotten tools. It also helps to extend the lifespan of the tools by protecting them from damage or loss. Finally, it shows respect for the tools and the work being done, demonstrating professionalism and responsibility.Rate this question:
-
- 10.
I understand that if I do not follow the safety rules and procedures I will:
- A.
Greatly increase the possibility of injury
- B.
Lose my privilege to work on the machines
- C.
Possibly be removed from the class
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
If someone does not follow the safety rules and procedures, they greatly increase the possibility of getting injured. Additionally, they may lose their privilege to work on the machines as a consequence of their negligence. Furthermore, they could possibly be removed from the class as a result of their failure to adhere to the safety guidelines. Therefore, all of the mentioned outcomes are possible if the safety rules and procedures are not followed.Rate this question:
-
- 11.
Cell phones are to be used in the shop.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement states that cell phones are to be used in the shop. However, the correct answer is false, indicating that cell phones are not allowed to be used in the shop.Rate this question:
-
- 12.
Machine operator only areas are painted in what color?
- A.
Red
- B.
Yellow
- C.
Blue
- D.
Green
Correct Answer
B. YellowExplanation
In many industrial settings, different colors are used to designate different areas for safety and organization purposes. Yellow is commonly used to indicate caution or warning, and it is often used to mark machine operator only areas. This helps to ensure that only trained operators have access to certain machinery or equipment, reducing the risk of accidents or unauthorized use.Rate this question:
-
- 13.
When gathering clamps at a work table you would lean them against the table until you are ready to use them.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
When gathering clamps at a work table, it is not recommended to lean them against the table until you are ready to use them. This is because leaning them against the table can cause them to fall and potentially cause damage or injury. It is better to store clamps in a secure and organized manner, such as using a clamp rack or a designated storage area, to ensure their safety and prevent any accidents.Rate this question:
-
- 14.
Those students who are allowed to work in the shop are:
- A.
Anyone with previous experience
- B.
Anyone that thinks they know how
- C.
Individuals who have passed their safety tests with 100%
- D.
Only the instructor
Correct Answer
C. Individuals who have passed their safety tests with 100%Explanation
The correct answer is "Individuals who have passed their safety tests with 100%". This means that only those students who have achieved a perfect score on their safety tests are allowed to work in the shop. This requirement ensures that the students have a thorough understanding of safety protocols and are capable of working safely in the shop environment.Rate this question:
-
- 15.
Equipment and tools available for you to use are?
- A.
Only tools and machines that you have been instructed on how to use.
- B.
Any tool in the shop.
- C.
Any tool or machine you think you can figure out.
- D.
Non of the above.
Correct Answer
A. Only tools and machines that you have been instructed on how to use.Explanation
It is important to only use tools and machines that you have been instructed on how to use to ensure safety and prevent accidents. Using any tool in the shop or trying to figure out how to use any tool or machine on your own can lead to potential hazards and damage. Therefore, the correct answer is to only use tools and machines that you have been instructed on how to use.Rate this question:
-
- 16.
Your first priority when working at a machine is?
- A.
That I don't make a mistake
- B.
That I talk to my friends
- C.
That I check my snap
- D.
That I am always focused on the machine and thinking about safety.
Correct Answer
D. That I am always focused on the machine and thinking about safety.Explanation
The first priority when working at a machine should always be to ensure safety and maintain focus on the task at hand. This is crucial to prevent any accidents or mistakes that could potentially harm oneself or others. Being constantly aware of the machine and its potential hazards helps in minimizing risks and maintaining a safe working environment.Rate this question:
-
- 17.
Before turning on one of the machines you should?
- A.
Check to see if you have any texts on your phone
- B.
Yell out that you are about top use the machine
- C.
Check to see if all the safety guards and equipment are working properly.
- D.
Take a selfie
Correct Answer
C. Check to see if all the safety guards and equipment are working properly.Explanation
The correct answer is to check to see if all the safety guards and equipment are working properly. This is important because it ensures that the machine is safe to use and reduces the risk of accidents or injuries. Checking for safety guards and equipment ensures that they are in place and functioning correctly, providing necessary protection for the user. This step is crucial in maintaining a safe working environment and following proper safety protocols.Rate this question:
-
- 18.
If I get injured in any way I need to tell?
- A.
A friend
- B.
The principal
- C.
The custodian
- D.
The instructor
Correct Answer
D. The instructorExplanation
In case of an injury, it is important to inform the instructor. They are responsible for the safety and well-being of the individuals under their supervision, especially in a learning or training environment. The instructor can provide immediate assistance or take appropriate action to ensure proper medical attention is given. They can also document the incident and initiate any necessary protocols or procedures to prevent future accidents.Rate this question:
-
- 19.
Oil-based finish rags are to be soaked in water and placed in the approved metal container.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Oil-based finish rags are highly flammable and can spontaneously combust if left in a pile. Soaking them in water helps to reduce the risk of combustion by cooling down the temperature and preventing the build-up of heat. Placing them in an approved metal container further ensures safety by containing any potential fire. Therefore, the statement is true as it provides the correct method for handling oil-based finish rags to prevent fire hazards.Rate this question:
-
- 20.
I pledge to conduct myself in a responsible manner and practice safety for myself and others in the shop.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The given statement expresses a commitment to act responsibly and prioritize safety in a shop environment. By pledging to conduct oneself in a responsible manner and practice safety, the individual acknowledges the importance of their own well-being and the well-being of others. This demonstrates a proactive attitude towards preventing accidents and promoting a safe working environment. Therefore, the correct answer is true.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Aug 25, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 14, 2020Quiz Created by
Lindsay McCargar
- Back Safety Quizzes
- Chemistry Safety Quizzes
- Drill Press Safety Quizzes
- Electrical Safety Quizzes
- Fire Safety Quizzes
- General Safety Quizzes
- Kitchen Safety Quizzes
- Laboratory Safety Quizzes
- Lathe Safety Quizzes
- Office Safety Quizzes
- Online Safety Quizzes
- Radiation Safety Quizzes
- Safe Lifting Quizzes
- Work Safety Quizzes
- Workplace Safety Quizzes
Back to top