What Do You Know About Wall Framing? Trivia Quiz
(10).jpg "What Do You Know About Wall Framing? Trivia Quiz - Quiz")
Wall framing in residence construction includes the vertical and horizontal walls of exterior walls and interior partitions, both bearing walls and non -bearing walls. Framing in a building is the fitting together of pieces to provide a structure with support and shape. Framing items are usually wood, engineered wood, or structural steel. If you choose to know more about wall framing, this is the quiz for you.
- 1.
What is the main verticle member of a wall?
- A.
Stud
- B.
Plate
- C.
Spacer
- D.
Trimmer
Correct Answer
A. StudExplanation
A stud is the main vertical member of a wall. It is a vertical framing member that provides support and stability to the wall structure. Studs are typically made of wood or metal and are evenly spaced along the length of the wall. They serve as the primary load-bearing element, supporting the weight of the wall and any additional loads placed on it. The other options, such as plate, spacer, and trimmer, are not the main vertical members of a wall.Rate this question:
-
- 2.
What member of a wall holds up the header?
- A.
Stud
- B.
Plate
- C.
Header
- D.
Trimmer stud
Correct Answer
D. Trimmer studExplanation
A trimmer stud is a member of a wall that is responsible for holding up the header. The header is a horizontal structural element that spans an opening in a wall, such as a doorway or window. The trimmer stud is positioned on either side of the opening and provides support for the header, ensuring that it can bear the weight of the wall above it.Rate this question:
-
- 3.
What is the member of a wall that goes directly over the opening for a window or door?
- A.
Footer
- B.
Header
- C.
Stud
- D.
Trimmer
Correct Answer
B. HeaderExplanation
The member of a wall that goes directly over the opening for a window or door is called a header. A header is a horizontal beam that provides support and distributes the weight of the structure above the opening, ensuring the stability and integrity of the wall. It is typically made of wood, steel, or concrete and is designed to withstand the load and pressure exerted on it.Rate this question:
-
- 4.
What is the name of the member of a wall that goes directly next to the trimmer stud?
- A.
Jack stud
- B.
Cripple stud
- C.
King stud
- D.
John stud
Correct Answer
C. King studExplanation
The member of a wall that goes directly next to the trimmer stud is called the king stud. The king stud is a vertical framing member that provides support and stability to the wall, particularly around openings such as doors or windows. It is positioned on either side of the trimmer stud, which is a horizontal member that supports the header above the opening. The king stud helps to distribute the weight and load evenly, ensuring the structural integrity of the wall.Rate this question:
-
- 5.
What is the lowest horizontal member of a wall?
- A.
Bottom Plate
- B.
Double Plate
- C.
Stud
- D.
Header
Correct Answer
A. Bottom PlateExplanation
The lowest horizontal member of a wall is called the bottom plate. It is typically made of wood and runs along the bottom of the wall, providing a stable base for the wall structure. The bottom plate is anchored to the floor and serves as a connection point for the vertical studs that make up the wall. It helps to distribute the weight of the wall evenly and provides stability to the overall structure.Rate this question:
-
- 6.
What is the uppermost horizontal member of a wall?
- A.
Double plate
- B.
Top plate
- C.
Sill plate
- D.
Upper plate
Correct Answer
B. Top plateExplanation
In wall construction, the top plate is the uppermost horizontal member that runs the entire length of the wall. It serves several crucial functions:
Structural Support: The top plate provides structural integrity to the wall, tying the vertical studs together and distributing the weight of the roof or upper floors.
Connection Point: It serves as a connection point for ceiling joists, rafters, and other framing members, ensuring a stable and continuous load path.
Wall Finish: The top plate also provides a nailing surface for drywall, trim, and other interior finishes, completing the wall assembly.Rate this question:
-
- 7.
What horizontal member of a wall forms the bottom of the window opening?
- A.
Rough seal
- B.
Rough plate
- C.
Rough stud
- D.
Rough sill
Correct Answer
D. Rough sillExplanation
The horizontal member of a wall that forms the bottom of the window opening is called the rough sill. This component provides support and structure to the window, helping to distribute the weight evenly and ensuring stability. The rough sill is typically made of wood or another sturdy material and is installed during the initial construction phase of a building.Rate this question:
-
- 8.
What is the verticle member of a wall that is shorter than a common stud and either goes between the header and the top plate or between the sill and the bottom plate?
- A.
Trimmer stud
- B.
Cripple stud
- C.
Unique stud
- D.
King stud
Correct Answer
B. Cripple studExplanation
A cripple stud is a vertical member of a wall that is shorter than a common stud and is typically placed between the header and the top plate or between the sill and the bottom plate. It is used to provide additional support and stability to the wall structure. Unlike a common stud, which runs the full height of the wall, a cripple stud is shorter in length and serves a specific purpose in framing construction.Rate this question:
-
- 9.
What horizontal member of the wall lays directly below the double plate and has studs nailed to it?
- A.
Lower plate
- B.
Sill plate
- C.
Cripple plate
- D.
Top plate
Correct Answer
D. Top plateExplanation
The top plate is the horizontal member of the wall that is directly below the double plate and has studs nailed to it. It acts as a support for the studs and helps to distribute the weight of the wall evenly. The top plate is typically made of wood and is an essential component in the construction of a wall.Rate this question:
-
- 10.
What is the plywood layer called that lays directly between the floor joists and the bottom plate?
- A.
Floor
- B.
Subfloor
- C.
Topfloor
- D.
Quarterfloor
Correct Answer
B. SubfloorExplanation
The plywood layer that lays directly between the floor joists and the bottom plate is called the subfloor. This layer provides a stable and even surface for the finished flooring to be installed on top of. It helps to distribute the weight of the floor and any loads placed on it, preventing sagging or unevenness. The subfloor also helps to reduce noise and acts as a barrier against moisture and pests.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Sep 25, 2024Quiz Edited by
ProProfs Editorial Team -
Jan 14, 2012Quiz Created by
Bwagaman
Back to top