Do You Know About ESD? Electric Quiz
Electrostatic discharge (ESD) is the sudden flow of electricity between two electrically charged objects cause by contact an electrical short, or dielectric breakdown. ESD occurs when two electrically charged objects contact each other, are involved in an electrical short or suffer a dielectric breakdown, resulting in a sudden flow of electricity.
- 1.
Typically, all ESD sensitive (ESDS) items should be handeled:
- A.
Only when room ionization is utilized
- B.
Only at an ESD control workstation
- C.
ESDS items should never be handled
- D.
Both a and B
Correct Answer
B. Only at an ESD control workstationExplanation
ESD sensitive items should only be handled at an ESD control workstation because these workstations are specifically designed to minimize the risk of electrostatic discharge. They are equipped with various measures such as grounded surfaces, wrist straps, and ionizers to prevent the build-up and discharge of static electricity. Handling ESD sensitive items at these workstations ensures that proper precautions are taken to protect the items from potential damage caused by electrostatic discharge.Rate this question:
-
- 2.
ESD sensitive (ESDS) items that need to be transported (in-house) from one ESD work area to another should be :
- A.
Packaged in an ESD protective shielding bag
- B.
Placed in a conductive tote box with lid
- C.
Transported on an ungrounded cart
- D.
Either a or b
Correct Answer
D. Either a or bExplanation
ESD sensitive items need to be protected from electrostatic discharge during transportation. Packaging them in an ESD protective shielding bag or placing them in a conductive tote box with a lid can provide the necessary protection. Both options offer a barrier against static electricity and prevent potential damage to the items. Therefore, either option A or B can be chosen for transporting ESD sensitive items.Rate this question:
-
- 3.
An ESD control workstation consists of:
- A.
An ESD control work surface
- B.
An ESD control wrist strap
- C.
A common point for ground
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
An ESD control workstation consists of all of the above components. It includes an ESD control work surface, which provides a grounded surface to prevent electrostatic discharge. It also includes an ESD control wrist strap, which is worn by the operator to prevent static buildup. Additionally, a common point for ground is necessary to ensure that all components are properly grounded and static electricity is effectively dissipated. Therefore, all of these components are essential for an effective ESD control workstation.Rate this question:
-
- 4.
Typically, single conductor (non-constant monitored) ESD control wrist straps must be tested:
- A.
Twice daily, morning and afternoon
- B.
Prior to first use daily (Only on days of actual use)
- C.
Annually
- D.
Every 90 days
Correct Answer
B. Prior to first use daily (Only on days of actual use)Explanation
Single conductor (non-constant monitored) ESD control wrist straps should be tested prior to first use daily (Only on days of actual use). This means that the wrist strap should be checked for functionality and proper grounding before it is used each day. This ensures that the wrist strap is working effectively to prevent electrostatic discharge (ESD) and protect sensitive electronic components. Testing the wrist strap on days of actual use ensures that it is in good working condition when it is needed.Rate this question:
-
- 5.
ESD Sensitive (ESDS) items are susceptible to ESD damage until such time that they are properly packaged in ESD control electrostatic shielding packing materials.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
ESD sensitive items are vulnerable to ESD damage unless they are appropriately packaged in electrostatic shielding packing materials designed for ESD control. This means that without proper packaging, these items can be easily damaged by electrostatic discharge. Therefore, the statement "ESD Sensitive (ESDS) items are susceptible to ESD damage until such time that they are properly packaged in ESD control electrostatic shielding packing materials" is true.Rate this question:
-
- 6.
You are working at an ESD control workstation and have some job essential tools with electrically conductive tips and insulative handles. What would be the best approach before using these tools on ESD sensitive items?
- A.
Touch the tip of the tool to the ESD work surface to dissipate any static charges
- B.
No precauations necessary
- C.
Touch the tip of the tool with your fingertip to dissipate any static charges through your grounded wrist strap
- D.
Either a or c
Correct Answer
D. Either a or cExplanation
Before using the job essential tools with electrically conductive tips and insulative handles on ESD sensitive items, the best approach would be to either touch the tip of the tool to the ESD work surface or touch the tip of the tool with your fingertip to dissipate any static charges through your grounded wrist strap. Both options help to prevent any static charges from damaging the ESD sensitive items.Rate this question:
-
- 7.
You walk over to a supply bin and find a sealed ESD package that your are looking for that has the following label: "Attention-State Sensitive Devices, Handle Only At Static Safe Workstations." What should you do?
- A.
Don't pick up the ESD package as you might damage the item since you are not wearing an ESD control wrist strap
- B.
Pick up the ESD package and take it to an ESD workstation, then put on an ESD control wrist strap before you open the package
- C.
Since the item is already packaged in ESD Packaging, it is safe to open the package even though you're not wearing an ESD Control Wrist Strap
- D.
Open the ESD package to verify the contents, then take the package over to an ESD work station for proper handling
Correct Answer
B. Pick up the ESD package and take it to an ESD workstation, then put on an ESD control wrist strap before you open the package -
- 8.
An ESD control workstation work surface may be used for :
- A.
Work that requires handling of ESD Sensitive items
- B.
Work other than ESD control work provided that no ESD sensitive items remain unprotected at the workstation during this time
- C.
Anything including eating your lunch or making coffee
- D.
Both A and B
Correct Answer
D. Both A and BExplanation
An ESD control workstation work surface may be used for work that requires handling of ESD Sensitive items and work other than ESD control work provided that no ESD sensitive items remain unprotected at the workstation during this time. This means that the work surface can be used for tasks involving ESD sensitive items as well as non-ESD control work, as long as the ESD sensitive items are properly protected or removed from the workstation during non-ESD control work.Rate this question:
-
- 9.
Standard single conductor wrist straps (without constant monitoring) require:
- A.
A daily test log
- B.
No testing
- C.
A wrist strap tester
- D.
Both A and C
Correct Answer
D. Both A and CExplanation
Standard single conductor wrist straps without constant monitoring require both a daily test log and a wrist strap tester. A daily test log is necessary to document the regular testing of the wrist straps to ensure they are functioning properly. Additionally, a wrist strap tester is needed to periodically test the resistance of the strap to ensure it is within acceptable limits. Both of these measures are important to maintain the effectiveness of the wrist straps in dissipating static charges and protecting sensitive electronic equipment.Rate this question:
-
- 10.
Static generating materials may be present at the ESD control workstation with ESD sensitive items if:
- A.
The static generating materials are job essential
- B.
Static generating materials are never allowed on the work surface
- C.
The static generating materials have been recently cleaned
- D.
None of the above
Correct Answer
A. The static generating materials are job essentialExplanation
Static generating materials may be present at the ESD control workstation with ESD sensitive items if they are job essential. This means that if the materials are necessary for the completion of the job or task at hand, they can be allowed in the workstation despite their potential to generate static electricity. However, it is important to ensure that proper ESD control measures are in place to minimize the risk of damage to the sensitive items.Rate this question:
-
- 11.
A signed ESD control certification document should be :
- A.
Posted at the entrance to the ESD work area
- B.
Stored in a readily accessible file
- C.
Hung on the refrigerator
- D.
Either A or B
Correct Answer
D. Either A or BExplanation
A signed ESD control certification document should be either posted at the entrance to the ESD work area or stored in a readily accessible file. This ensures that the document is easily visible and accessible to anyone entering the area, allowing them to verify that proper ESD control measures are being followed. Hanging the document on the refrigerator is not a suitable option as it may not be easily visible or accessible to everyone who needs to see it.Rate this question:
-
- 12.
The entrance to an ESD control work area shall have an attention sign alerting personnel that they are entering an ESD protective area.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The entrance to an ESD control work area should have an attention sign to alert personnel that they are entering an ESD protective area. This is important because ESD (electrostatic discharge) can cause damage to sensitive electronic components. By having a sign, personnel are reminded to take necessary precautions to prevent ESD, such as wearing appropriate grounding devices and handling equipment properly. This helps to maintain a safe and controlled environment for handling electronic devices and prevents potential damage.Rate this question:
-
- 13.
Which of the following best describes how an ESD sensitive item (e.g. circuit board) should be handled if you need to remove it from the ESD workstation and you will no longer be wearing your ESD control wrist strap and you do not have an ESD flooring system?
- A.
Place the item in a "pink poly" bag before removing from the ESD workstation
- B.
For temporary transit and storage, no ESD precautions are necessary. For long term strage, ensure that is is properly packaged in an ESD shielding bag or placed in an ESD tote box with lid before removing from the ESD workstation.
- C.
Place the item in a "clear poly" bag before removing from the ESD workstation
- D.
Ensure that it is properly packaged in an ESD shielding bag or placed in an ESD tote box with lid before removing from the ESD control workstation
Correct Answer
D. Ensure that it is properly packaged in an ESD shielding bag or placed in an ESD tote box with lid before removing from the ESD control workstationExplanation
The correct answer is to ensure that the ESD sensitive item is properly packaged in an ESD shielding bag or placed in an ESD tote box with a lid before removing it from the ESD control workstation. This is because without the ESD control wrist strap and an ESD flooring system, the item is at risk of being exposed to static electricity, which can damage sensitive electronic components. Proper packaging in an ESD shielding bag or tote box with a lid helps to prevent static electricity from reaching the item and causing damage.Rate this question:
-
- 14.
You need to perform maintenance on a console that contains ESD sensitive items. The maintenance action requires you to ensure that power is off and then remove a cover/panel that will expose the sensitive electronics. What should you do?
- A.
You disconnect powe and put on your ESD control wrist strap which you've bonded to the item's chassis, remove the cover and proceed with the maintenance action.
- B.
You disconnect power. Since you do not intend to remove any ESD sensitive items from the console, no additional ESD precautions are necessary.
- C.
Lock the entrance to the work center so that no one can enter the work area. Open the panel and quickly perform your maintenance action.
- D.
Lock the entrance to the work are so that no one can enter. Put on a wool sweater, rubber boots, and gloves. Disconnect the power and open the panel while scooting your feet repeatedly on a carpeted surface. Quickly perform your maintenance action. Touch someone afterwards to discharge any built up static charge
Correct Answer
A. You disconnect powe and put on your ESD control wrist strap which you've bonded to the item's chassis, remove the cover and proceed with the maintenance action.Explanation
The correct answer is to disconnect power and put on an ESD control wrist strap that is bonded to the item's chassis, then remove the cover and proceed with the maintenance action. This is the correct procedure because it ensures that the power is off and that the technician is properly grounded with the ESD control wrist strap. This helps to prevent any static electricity from damaging the sensitive electronics while performing the maintenance.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Aug 05, 2024Quiz Edited by
ProProfs Editorial Team -
Oct 19, 2012Quiz Created by
SCOTV
Back to top