Drill Press Safety Test Quiz
Russell Middle School - Gateway to Technology
Questions and Answers
- 1.
The ___________________ in the center of the table must be linjed up directly under the cutting tool.
Explanation
The clearance hole in the center of the table must be lined up directly under the cutting tool. A clearance hole is a hole drilled through a material to provide clearance for a fastener or tool. In this context, it is necessary to have the clearance hole aligned with the cutting tool to ensure proper positioning and accuracy during the cutting process.Rate this question:
- 2.
Use ____________________ or a drill press vise to hold the material firmly on the table.
Explanation
Clamps can be used to hold the material firmly on the table. They provide a secure grip and prevent the material from moving during the work process. Clamps are commonly used in woodworking, metalworking, and other construction activities where stability and precision are required. By securely holding the material, clamps ensure safety and accuracy while working with tools such as saws, drills, or milling machines.Rate this question:
- 3.
Use the ____________________ to tighten the chuck.
Explanation
The blank in the sentence is asking for a specific tool that can be used to tighten the chuck. The correct answer, "chuck key," fits perfectly in the sentence as it is the tool specifically designed to tighten the chuck.Rate this question:
- 4.
Check ____________________ to be sure the chuck key has been removed from the chuck before you turn on the drill press.
Explanation
To ensure the chuck key has been removed from the chuck before turning on the drill press, it is recommended to check twice. This implies that a single check may not be sufficient to guarantee the removal of the chuck key. By checking twice, it reduces the risk of accidentally starting the drill press with the chuck key still in place, which could lead to injury or damage to the equipment.Rate this question:
- 5.
Let the drill press coast to a stop. ____________________ try to stop it by hand.
Explanation
It is important to let the drill press coast to a stop because abruptly stopping it by hand can be dangerous. The rotating drill bit can cause injury if it suddenly stops and the operator's hand is still in contact with it. Therefore, it is recommended to never try to stop the drill press by hand and instead wait for it to come to a complete stop on its own.Rate this question:
- 6.
The drill press must be ____________________ stopped before changes or adjustments are made.
Explanation
The drill press must be completely stopped before changes or adjustments are made to ensure safety. If the drill press is not completely stopped, there is a risk of injury or damage to the equipment. It is important to wait for the drill press to come to a complete stop before attempting any changes or adjustments to prevent accidents.Rate this question:
- 7.
A piece of ____________________ should be used under the material when a hole is to be drilled all the way through the stock.
Explanation
When drilling a hole all the way through the stock, it is important to use a piece of scrap material underneath. This is because drilling can cause the material to splinter or break, and using scrap material underneath helps to prevent damage to the work surface. Additionally, the scrap material provides support and stability during the drilling process, ensuring a clean and accurate hole.Rate this question:
- 8.
Keep your hands and fingers away from the area directly ____________________ the drill bit.
Explanation
The correct answer is "under." This means that you should keep your hands and fingers away from the area directly beneath or below the drill bit. This is important to prevent any accidents or injuries that may occur while using the drill.Rate this question:
- 9.
Back out of a deep cut from time to time to prevent the bit from clogging and ____________________.
Explanation
When drilling a deep cut, the bit can become clogged with debris. By backing out of the cut periodically, the bit is able to clear the debris and prevent it from building up and causing the bit to overheat. Overheating can lead to damage to the bit and can also affect the quality of the cut. Therefore, it is important to prevent overheating by periodically backing out of the cut to allow the bit to cool down and clear any clogs.Rate this question:
- 10.
Be sure the drill bit is sharp, ____________________ and in good condition.
Explanation
A sharp and straight drill bit is necessary for effective drilling. If the drill bit is not straight, it may cause the hole to be crooked or off-center. This can lead to difficulties in inserting screws or other fasteners properly. Additionally, a straight drill bit ensures that the desired depth and angle of the hole are achieved. A dull or worn-out drill bit may not be able to cut through the material efficiently, resulting in a slower and less effective drilling process.Rate this question:
- 11.
Use a ____________________ to clear waste material from the drill press table.
Explanation
A brush can be used to clear waste material from the drill press table. This tool is commonly used in woodworking or metalworking to remove sawdust, metal shavings, or other debris that accumulates on the table during drilling operations. The bristles of the brush can easily sweep away the waste material, ensuring a clean and safe working environment.Rate this question:
- 12.
Never leave the drill press while it is still ____________________. Wait for it to come to a complete stop before you leave it.
Explanation
It is important to wait for the drill press to come to a complete stop before leaving it to ensure safety. If the drill press is still running while you leave, there is a risk of accidents or injuries occurring.Rate this question:
- 13.
Get the instructor's ____________________ before you use any special set-ups or attachments.
Explanation
Before using any special set-ups or attachments, it is important to obtain the instructor's permission. This ensures that the instructor is aware of the actions being taken and can provide guidance or assistance if needed. Without permission, there may be safety concerns or potential damage to equipment. Obtaining permission is a responsible and necessary step to ensure a smooth and successful use of special set-ups or attachments.Rate this question:
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 18, 2023Quiz Edited by
ProProfs Editorial Team -
Mar 08, 2009Quiz Created by
Truexal
- Back Safety Quizzes
- Chemistry Safety Quizzes
- Construction Safety Quizzes
- Electrical Safety Quizzes
- Fire Safety Quizzes
- Kitchen Safety Quizzes
- Laboratory Safety Quizzes
- Office Safety Quizzes
- Online Safety Quizzes
- Patient Safety Quizzes
- Safe Lifting Quizzes
- Sander Safety Quizzes
- Saw Safety Quizzes
Back to top