Trivia Quiz: How Well Do You Know About Drill Press?

1.

How many people are allowed to operate the Drill Press at one time?

A.

One
B.

Two
C.

Any number

Correct Answer
A. One

Explanation
Only one person is allowed to operate the Drill Press at one time. This ensures safety and prevents accidents or injuries that could occur if multiple people were operating the machine simultaneously.

Rate this question:

1

2.

If someone using the Drill Press had an accident and the Drill Press was still running what could you do without getting too near to the machine?

A.

Find the off button on the Drill Press.
B.

Just stand there and watch it.
C.

Hit the Emergency Stop button.

Correct Answer
C. Hit the Emergency Stop button.

Explanation
In the given scenario, if someone using the Drill Press had an accident and the machine was still running, the best course of action would be to hit the Emergency Stop button. This button is specifically designed for situations like accidents or emergencies, and it immediately stops the machine's operation, ensuring the safety of the person involved. It is the most effective way to quickly halt the machine without getting too close to it, minimizing any further risks or injuries.

Rate this question:

3.

If you wanted to use the Drill Press but were a little unsure of what to do, what would be the sensible thing to do?

A.

Ask the teacher.
B.

Ask your friend.
C.

Use it anyway.

Correct Answer
A. Ask the teacher.

Explanation
If you are unsure of what to do when using the Drill Press, the sensible thing to do would be to ask the teacher. They have the knowledge and experience to guide you on how to properly use the tool and ensure your safety. Asking your friend may not guarantee accurate information, and using it anyway without proper guidance can be dangerous.

Rate this question:

4.

It's ok to wear jewelry whilst operating the Drill Press as long as you take care.

A.

True
B.

False

Correct Answer
B. False

Explanation
Wearing jewelry while operating a drill press is not safe, even if one takes care. Jewelry can get caught in the moving parts of the machine, leading to serious injuries or accidents. It is always recommended to remove any loose items, including jewelry, before operating machinery to ensure personal safety.

Rate this question:

1

5.

Other people waiting to use the Drill Press must....

A.

Stand back behind the yellow and black lines.
B.

Stand next to the person who is using it.
C.

Use the Drill Press at the same time.

Correct Answer
A. Stand back behind the yellow and black lines.

Explanation
In order to ensure safety and avoid accidents, it is necessary for other people waiting to use the Drill Press to stand back behind the yellow and black lines. This helps to maintain a safe distance from the machine and prevents any potential harm or injury. Standing next to the person who is using it or using the Drill Press at the same time can be dangerous and increase the risk of accidents. Therefore, it is important to follow the instruction and stand back behind the designated lines for everyone's safety.

Rate this question:

6.

What safety equipment must be worn when operating the drill press?

A.

Gloves
B.

Safety Goggles
C.

Dust Mask
D.

Apron

Correct Answer(s)
B. Safety Goggles
D. Apron

Explanation
When operating a drill press, it is important to wear safety goggles to protect the eyes from any flying debris or particles. Additionally, an apron should be worn to protect the body from any potential spills or accidents that may occur while operating the machine. Wearing gloves may not be recommended as they can get caught in the moving parts of the drill press and cause injury. A dust mask may not be necessary unless there is a significant amount of dust or particles being produced during the drilling process.

Rate this question:

7.

What would you do to ensure no loose clothing or other items get caught up in the spinning Drill Press?

A.

Wear an apron.
B.

Remove any jewellery
C.

Stand back while using the drill
D.

Tie long hair back
E.

Remove apron
F.

Roll your shirt sleeves up
G.

Remove your blazer
H.

Don't use the drill

Correct Answer(s)
A. Wear an apron.
B. Remove any jewellery
D. Tie long hair back
F. Roll your shirt sleeves up
G. Remove your blazer

Explanation
To ensure no loose clothing or other items get caught up in the spinning Drill Press, it is important to follow several safety measures. First, wearing an apron helps to prevent loose clothing from getting entangled in the drill. Second, removing any jewellery reduces the risk of it getting caught in the machinery. Third, tying long hair back prevents it from getting caught in the drill. Fourth, rolling shirt sleeves up and removing a blazer ensures that there are no loose fabric that can get tangled. By following these precautions, the risk of accidents or injuries caused by loose items getting caught in the spinning drill press is minimized.

Rate this question:

8.

When using the Drill Press, a Machine Vice must be used to...

A.

Secure your work firmly in place before drilling.
B.

Stand on if you are too short to reach the drill.
C.

Tidy up once you have finished.

Correct Answer
A. Secure your work firmly in place before drilling.

Explanation
When using a drill press, it is important to use a machine vice to secure the work firmly in place before drilling. This is necessary to ensure that the workpiece does not move or slip during the drilling process, which could lead to inaccurate holes or potential accidents. The machine vice provides a stable and secure grip on the workpiece, allowing for precise and controlled drilling operations.

Rate this question:

9.

Fill in the blank: When using the drill press I must wear _______ to protect my eyes.

Correct Answer
Goggles, safety glasses, glasses

Explanation
When using a drill press, it is crucial to wear goggles or safety glasses to protect your eyes from any flying debris or particles that may be generated during the drilling process. These protective eyewear options provide a barrier between your eyes and potential hazards, reducing the risk of eye injuries.

Rate this question:

0

10.

The Drill Press is fitted with a safety device which helps stop bits of metal etc from flying out and hitting you. What is this safety device called?

Correct Answer
guard
gard
drill guard
safety guard
drill gard
safety gard

Explanation
The safety device that is fitted on the Drill Press to prevent bits of metal from flying out and hitting the user is called a guard.

Rate this question:

1