The Laser Printing Process

Approved & Edited by ProProfs Editorial Team

The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.

Learn about Our Editorial Process

| By Tom12341

Tom12341

Community Contributor

Quizzes Created: 1 | Total Attempts: 330

Questions: 7 | Attempts: 330 | Updated: Mar 21, 2023

Questions

Settings

Feedback

During the Quiz End of Quiz

Difficulty

Sequential Easy First Hard First

Play as

Quiz Flashcard

Create your own Quiz

Share on Facebook Share on Twitter Share on Whatsapp Share on Pinterest Share on Email Copy to Clipboard Embed on your website

The laser printing process

Questions and Answers

1.

What is the 1st step in the laser Printing process
- A.
  
  Fuse the image
- B.
  
  Cut the cake
- C.
  
  Transfer the image
- D.
  
  Clean the drum
Correct Answer
D. Clean the drum

Explanation
The first step in the laser printing process is to clean the drum. This is necessary to ensure that there is no residual toner or debris on the drum surface, which could affect the quality of the printed image. Cleaning the drum helps to maintain the integrity of the image and ensures that the toner is properly transferred in the subsequent steps of the printing process.

Rate this question:

1
0
2.

What is the last step in the cleaning process for all laser printer

Correct Answer
charge write fuse

Explanation
The last step in the cleaning process for all laser printers is to fuse the toner onto the paper. This is done by applying heat and pressure to the paper, causing the toner particles to melt and adhere to the paper fibers. Fusing ensures that the printed image is permanent and does not smudge or smear.

Rate this question:

4
3.

Whats the first thing you do when your cleaning the drum
- A.
  
  Melt the toner to the paper
- B.
  
  Electrical cleaning
- C.
  
  Remove the fuse
- D.
  
  Transfer the corona
Correct Answer
B. Electrical cleaning

Explanation
When cleaning the drum, the first thing you need to do is perform electrical cleaning. This involves using a cleaning mechanism to remove any toner or debris from the drum surface using an electrical charge. This process helps to ensure that the drum is clean and ready for the next printing job.

Rate this question:
4.

What must be done for the drum to be receptive
- A.
  
  Charge the drum
- B.
  
  Reset the drum
- C.
  
  Clean the drum
- D.
  
  Plug in the drum
Correct Answer
A. Charge the drum

Explanation
To make the drum receptive, it needs to be charged. Charging the drum refers to supplying it with electrical energy or power so that it can function properly. This process ensures that the drum is ready to receive and process any input or commands it receives.

Rate this question:
5.

Where does the cpu send and process the requeast for a print job
- A.
  
  Raster image
- B.
  
  Print spooler
- C.
  
  Raster image processer
- D.
  
  Image writer
Correct Answer
B. Print spooler

Explanation
The CPU sends and processes the request for a print job to the print spooler. The print spooler is a software program that manages all print jobs in a queue, ensuring that they are processed in the order they were received. It acts as an intermediary between the CPU and the printer, allowing the CPU to send the print job to the spooler, which then sends it to the printer for processing. This helps to improve efficiency and allows the CPU to continue with other tasks while the print job is being processed.

Rate this question:
6.

What does( R.I.P) stand for in the laser printing process
- A.
  
  Rest in peace
- B.
  
  Raster incline perception
- C.
  
  Raster image processer
- D.
  
  Rest in piss
Correct Answer
C. Raster image processer

Explanation
The correct answer is "raster image processer." In the laser printing process, RIP stands for raster image processer. A RIP is a hardware or software component that converts digital image files into a format that can be printed by a laser printer. It processes the image data, converts it into a rasterized format, and sends it to the printer for printing.

Rate this question:
7.

Whats is the raster image
- A.
  
  A pattern of dots
- B.
  
  The actual picture
- C.
  
  Image processer
Correct Answer
A. A pattern of dots

Explanation
A raster image is a type of digital image that is made up of a grid of pixels, with each pixel representing a specific color or shade. These pixels are arranged in a pattern of dots, forming the overall image. Therefore, the correct answer is "a pattern of dots."

Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Mar 21, 2023

Quiz Edited by
ProProfs Editorial Team
Oct 20, 2009

Quiz Created by
Tom12341

The Laser Printing Process

What is the 1st step in the laser Printing process

What is the last step in the cleaning process for all laser printer

Whats the first thing you do when your cleaning the drum

What must be done for the drum to be receptive

Where does the cpu send and process the requeast for a print job

What does( R.I.P) stand for in the laser printing process

Whats is the raster image