Mainview Sc Training Sept 2012 - Day 1
(28).webp "Mainview Sc Training Sept 2012 - Day 1 - Quiz")
- 1.
What are the three new objects introduced with MVI 6.1?
- A.
Calendars, thresholds, and sets
- B.
Product, table, and element
- C.
Periods, thresholds, and selections
- D.
Calendar period, threshold set, and threshold selection
Correct Answer
D. Calendar period, threshold set, and threshold selectionExplanation
The three new objects introduced with MVI 6.1 are calendar period, threshold set, and threshold selection. These objects likely serve specific functions within the MVI 6.1 system, such as managing time periods, defining thresholds, and making selections based on those thresholds.Rate this question:
-
- 2.
Manual Calendar Periods can be changed by
- A.
Operator only
- B.
Views only
- C.
Operators and Views
- D.
Never
Correct Answer
C. Operators and ViewsExplanation
Operators and Views can change the Manual Calendar Periods. This means that both operators and users with view access have the ability to modify the calendar periods manually.Rate this question:
-
- 3.
Calendar periods
- A.
Cannot span past midnight
- B.
Can be a span of contiguous time up to a week
- C.
Can be used to define quarterly and yearly periods
- D.
Have only one time span
Correct Answer
A. Cannot span past midnightExplanation
This answer suggests that calendar periods cannot extend beyond midnight. In other words, a calendar period cannot start on one day and end on the following day. This is because calendar periods are typically defined as continuous spans of time within a single day, week, quarter, or year. Therefore, they cannot cross over into the next day by including time past midnight.Rate this question:
-
- 4.
Threshold sets define
- A.
Comparison values and display attributes
- B.
When specific comparison values should be utilized
- C.
Whether dynamic thresholds should be used or not
- D.
When a shift change usually occurs
Correct Answer
A. Comparison values and display attributesExplanation
Threshold sets are used to define comparison values and display attributes. They determine when specific comparison values should be utilized and whether dynamic thresholds should be used or not. These sets help in setting benchmarks and determining if a certain value falls within acceptable limits or not. Additionally, they also specify the display attributes that should be applied when these thresholds are met or exceeded. Overall, threshold sets play a crucial role in monitoring and analyzing data by providing a clear indication of when certain values require attention or action.Rate this question:
-
- 5.
Threshold Selection is used to
- A.
Define what product, table, and element a view should use
- B.
Define which threshold sets to use when a calendar period is active
- C.
Whether dynamic threshold should be used on an alarm
- D.
If a product can use dynamic thresholds on views
Correct Answer
B. Define which threshold sets to use when a calendar period is activeExplanation
Threshold Selection is used to determine which threshold sets should be applied when a calendar period is active. This means that depending on the specific time period, different threshold sets can be used to monitor and evaluate the performance of a product, table, or element in a view. By selecting the appropriate threshold sets for each calendar period, users can ensure that the thresholds are aligned with the specific conditions and requirements of that period, allowing for more accurate monitoring and analysis.Rate this question:
-
- 6.
In SSI nold, Dynamic Thresholds are
- A.
Not available for any except the current system
- B.
Derived from the current system if the target doesn't have dynamic thresholds
- C.
From the views for all target systems
- D.
Derived from the target systems
Correct Answer
D. Derived from the target systemsExplanation
Dynamic thresholds in SSI nold are derived from the target systems. This means that the thresholds are determined based on the specific characteristics and requirements of each individual target system. The dynamic thresholds are not available for any system except the current system, as they are specifically tailored to the target system's needs. This approach ensures that the thresholds are optimized for each target system, allowing for more accurate and effective monitoring and management of system performance.Rate this question:
-
- 7.
The CASPARM registry is
- A.
Kept only during the current IPL
- B.
A zFS file system to backup the MVI Common registry
- C.
An RTCS Product registry for dynamic threshold information and versions
- D.
Optional
Correct Answer
C. An RTCS Product registry for dynamic threshold information and versionsExplanation
The CASPARM registry is an RTCS Product registry for dynamic threshold information and versions. This means that it is a database or system that stores information related to dynamic threshold values and versions of the RTCS (Real-Time Communication Services) product. It is used to keep track of these important details and ensure proper functioning of the RTCS system.Rate this question:
-
- 8.
Registry Maintenance Utility can
- A.
Only be used for backup and restore of the CASPERM
- B.
Not be used by customers
- C.
Delete a registry
- D.
Restore to a larger registry
Correct Answer
D. Restore to a larger registryExplanation
The Registry Maintenance Utility is a tool that is specifically designed for the backup and restore of the CASPERM registry. It cannot be used by customers for any other purposes. However, it does have the capability to restore to a larger registry if needed. This means that if there is a need to expand the size of the registry, the utility can be used to restore the CASPERM registry to a larger size.Rate this question:
-
- 9.
UIM is now used for
- A.
Making the DNA Console available to MVI
- B.
Nothing
- C.
Making MVI required for DB2 products
- D.
Allowing MVI to handle web services
Correct Answer
D. Allowing MVI to handle web servicesExplanation
UIM (User Interface Manager) is a system that allows for the management and display of user interfaces. In this context, UIM is being used to enable MVI (Model-View-Intent) to handle web services. MVI is an architectural pattern that separates the user interface logic from the business logic. By allowing MVI to handle web services, it means that MVI can now interact with and perform operations on web services, enhancing its capabilities and functionality.Rate this question:
-
- 10.
A quick way to see if things are connected properly is
- A.
Do a D A,L and try to find all the started tasks
- B.
Check MVAO for proper objects running
- C.
Check the CASINFO view
- D.
Wait for the phone to ring
Correct Answer
C. Check the CASINFO viewExplanation
The CASINFO view is suggested as a quick way to see if things are connected properly. This view provides information about the current status of the CAS (Central Authentication Service) system, which is responsible for managing authentication and authorization for multiple applications. By checking the CASINFO view, one can verify if the CAS system is running smoothly and if there are any issues or errors that need to be addressed.Rate this question:
-
- 11.
If I want to monitor data from “3” production LPARs in order to set thresholds for my installation, how many TA servers do I need to have?
- A.
"0": There is no server component to TA
- B.
"1": TA server can monitor multiple LPARS and multiple Views per LPAR
- C.
“3”: One for each LPAR to be monitored
- D.
3 times the number of Views - each TA server can only monitor one View on a single LPAR
Correct Answer
B. "1": TA server can monitor multiple LPARS and multiple Views per LPARExplanation
The correct answer is "1": TA server can monitor multiple LPARS and multiple Views per LPAR. This means that a single TA server is capable of monitoring data from multiple production LPARs and setting thresholds for the installation. The TA server can handle multiple LPARs and multiple views within each LPAR, making it efficient and capable of monitoring all the necessary data.Rate this question:
-
- 12.
When working in a “Study” in TA, the recommended threshold values that TA generates for a given metric and period for that “Study” will need to be recalculated:
- A.
On the mainframe before the metric data is retrieved by the workstation
- B.
Once a day at a time selected during the installaion of the TA server on the workstation
- C.
Every time the "Study" is reopened
- D.
Each time that there is a change in the factors being selected for the study (business week definition, statistical processing range, target system, etc.) or the objects for which the threshold is being calculated (workloads, systems, etc.)
Correct Answer
D. Each time that there is a change in the factors being selected for the study (business week definition, statistical processing range, target system, etc.) or the objects for which the threshold is being calculated (workloads, systems, etc.)Explanation
The recommended threshold values in TA need to be recalculated each time there is a change in the factors being selected for the study, such as the business week definition, statistical processing range, target system, etc. This is also applicable when there is a change in the objects for which the threshold is being calculated, such as workloads, systems, etc.Rate this question:
-
- 13.
What is a "Confidence Level"?
- A.
A statistical measurement of the variability of the data
- B.
A statistical measurement of the statistical statisticians
- C.
A statistically calculated measure of the confidence in the validity of the results
- D.
A statistical measurement of the validity of the data
Correct Answer
C. A statistically calculated measure of the confidence in the validity of the resultsExplanation
A "Confidence Level" is a statistically calculated measure that indicates the level of confidence or certainty in the validity of the results obtained from a statistical analysis. It helps to determine the range or interval within which the true value of a parameter is likely to fall. A higher confidence level indicates a greater degree of confidence in the accuracy and reliability of the results.Rate this question:
-
- 14.
Threshold Advisor requires which following critical component?
- A.
The 32-bit version of the JAVA runtine library
- B.
Windows 3.1 with Service Pack 2
- C.
The 64-bit version of the JAVA runtime library
- D.
The FORTRAN 77 compiler and runtime library with hyperspace toleration APAR's
Correct Answer
A. The 32-bit version of the JAVA runtine libraryExplanation
The Threshold Advisor requires the 32-bit version of the JAVA runtime library because it is specifically mentioned as a critical component. This suggests that the software is designed to work with this particular version of the JAVA runtime library and may not be compatible with other versions.Rate this question:
-
- 15.
When and how is MainView metric data transferred from the mainframe to the TA server?:
- A.
The mainframe pushes all data to the TA server every day at precisely midnight
- B.
The TA server accepts data when a TA "Study" is open
- C.
The TA server pulls the most recent data shortly after the expiration of each MainView historical interval on the mainframe
- D.
The push/pull process is invoked in an alternating fashion every hour, on the hour
Correct Answer
C. The TA server pulls the most recent data shortly after the expiration of each MainView historical interval on the mainframeExplanation
The correct answer states that the TA server pulls the most recent data shortly after the expiration of each MainView historical interval on the mainframe. This means that the TA server retrieves the data from the mainframe after a specific time interval has passed. This method ensures that the TA server always has the most up-to-date information from the MainView metric data.Rate this question:
-
- 16.
What is the status of a TA-generated recommended threshold when it gets pushed to the dynamic threshold repository on the mainframe?
- A.
Disabled
- B.
Enabled
- C.
Ready State
- D.
Waiting for Activation
Correct Answer
B. EnabledExplanation
When a TA-generated recommended threshold is pushed to the dynamic threshold repository on the mainframe, its status is "Enabled". This means that the threshold is active and in effect, ready to be used for monitoring and alerting purposes.Rate this question:
-
- 17.
The “Push” process of recommended threshold values from TA to the mainframe is:
- A.
An automatic process that can be scheduled on the mainframe
- B.
A manual process that has to be initiated each time by the TA user from the TA concole
- C.
Managed by MainView Explorer
- D.
An automatic process that can be scheduled on Windows
Correct Answer
B. A manual process that has to be initiated each time by the TA user from the TA concoleExplanation
The "Push" process of recommended threshold values from TA to the mainframe is a manual process that has to be initiated each time by the TA user from the TA console. This means that the TA user needs to manually trigger the process every time they want to push the recommended threshold values to the mainframe. It is not an automatic process that can be scheduled on the mainframe or Windows. Additionally, it is not managed by MainView Explorer.Rate this question:
-
- 18.
The objective of Release "1" of Threshold Advisor is:
- A.
To provide the MainView products with an industry-leading "differentiator"
- B.
To integrate CMM technology with MainView technology
- C.
To provide an "advisor" tool to help with MainView threshold management
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The objective of Release "1" of Threshold Advisor is to achieve all of the mentioned goals. It aims to provide the MainView products with a unique feature that sets them apart from others in the industry. It also involves integrating CMM technology with MainView technology to enhance their capabilities. Additionally, it aims to provide an "advisor" tool that assists with MainView threshold management. Therefore, the correct answer is "All of the above."Rate this question:
-
- 19.
What is the maximum number of threshold severity levels that TA allows the user to set?
- A.
1
- B.
3
- C.
5
- D.
7
Correct Answer
C. 5Explanation
TA allows the user to set a maximum of 5 threshold severity levels.Rate this question:
-
- 20.
To which mainframe systems will TA calculated recommended thresholds be pushed?
- A.
All systems in the Sysplex
- B.
All systems that are in the TA report
- C.
All systems to which the target mainframe UIM Server is connected
- D.
All systems that TA processed that are connected to the target mainframe UIM Server
Correct Answer
D. All systems that TA processed that are connected to the target mainframe UIM ServerExplanation
The recommended thresholds calculated by TA will be pushed to all systems that TA processed and are connected to the target mainframe UIM Server. This implies that only the systems that TA has processed and are connected to the target mainframe UIM Server will receive the recommended thresholds. The other options, such as all systems in the Sysplex or all systems in the TA report, do not specify the connection to the UIM Server, which is a crucial factor in determining where the thresholds will be pushed.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
May 18, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 16, 2012Quiz Created by
Catherine Halcomb
- Academic Quizzes
- Adult Learning Quizzes
- Blended Learning Quizzes
- Career Quizzes
- Coaching Quizzes
- College Quizzes
- Communication Quizzes
- Curriculum Quizzes
- Distance Learning Quizzes
- E Learning Quizzes
- Early Childhood Education Quizzes
- GCSE Quizzes
- Graduation Quizzes
- Kindergarten Quizzes
- Knowledge Quizzes
- Literacy Quizzes
- Online Assessment Quizzes
- Online Exam Quizzes
- Online Test Quizzes
- Physical Education Quizzes
- Qualification Quizzes
- Religious Education Quizzes
- School Quizzes
- Special Education Quizzes
- Student Quizzes
- Study Quizzes
- Subject Quizzes
- Teaching Quizzes
- Theory Quizzes
- Thesis Quizzes
- University Quizzes
Back to top