Building Tech - Tools & Equipment Prepare By: Rger Rino
To familiarize with the tools & equipment in construction.
- 1.
Identify the figure
- A.
Trencher
- B.
Front End Loader
- C.
Back Hoe
- D.
Grader
Correct Answer
C. Back HoeExplanation
The correct answer is Back Hoe because a backhoe is a type of excavating equipment that consists of a digging bucket on the end of a two-part articulated arm. It is commonly used for digging trenches, excavating soil, and performing other construction tasks. The other options, such as a trencher, front end loader, and grader, do not have the same design and functionality as a backhoe.Rate this question:
-
- 2.
Identify the figure
- A.
Trencher
- B.
Front End Loader
- C.
Back Hoe
- D.
Grader
Correct Answer
A. TrencherExplanation
A trencher is a type of construction equipment used to dig trenches, typically for laying pipes or cables. It consists of a rotating chain or wheel with digging teeth that cuts into the ground and removes the soil, creating a narrow trench. The other options listed, such as the front end loader, backhoe, and grader, are also types of construction equipment but they serve different purposes and do not specifically refer to a trench-digging machine. Therefore, the correct answer is Trencher.Rate this question:
-
- 3.
Bulldoser
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
C. Option 3 -
- 4.
Which one do you like?
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
A. Option 1Explanation
The given question asks for personal preference. Since there is no additional information provided, it is impossible to determine the reason behind the choice. Therefore, any of the options could be chosen as a personal preference without any specific explanation.Rate this question:
-
- 5.
Grader
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
B. Option 2 -
- 6.
Identify the figure
- A.
Fork Lift
- B.
Grader
- C.
Roller
- D.
Boom Lift
Correct Answer
A. Fork LiftExplanation
The correct answer is Fork Lift. A fork lift is a type of industrial truck that is commonly used to lift and move heavy loads. It is characterized by its two forks at the front that can be raised and lowered to lift and transport materials. The other options, grader, roller, and boom lift, are different types of construction equipment that serve different purposes and do not have the same features as a fork lift.Rate this question:
-
- 7.
Concrete Vibrator
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
A. Option 1 -
- 8.
Construction tool used to ensure that the pour is free of air bubbles and are even
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
D. Option 4Explanation
Option 4 is the correct answer because it is likely referring to a tool called a concrete vibrator. A concrete vibrator is used in construction to ensure that the poured concrete is free of air bubbles and is evenly distributed. By vibrating the concrete, the tool helps to remove any trapped air and allows the mixture to settle uniformly, resulting in a stronger and more durable finished product.Rate this question:
-
- 9.
Identify the figure
- A.
Jack Hammer
- B.
Concrete Mixer
- C.
Compressor
- D.
Generator
Correct Answer
C. CompressorExplanation
The correct answer is Compressor. This is because a compressor is a device that increases the pressure of a gas or air by reducing its volume. It is commonly used in various industries to power pneumatic tools, provide compressed air for machinery, and for refrigeration and air conditioning systems. A compressor is different from the other options mentioned, as a jack hammer is a tool used for breaking concrete, a concrete mixer is used for mixing concrete, and a generator is used to generate electricity.Rate this question:
-
- 10.
Identify the figure
- A.
Trench
- B.
Front end loader
- C.
Back Hoe
- D.
Grader
Correct Answer
B. Front end loaderExplanation
The figure in question is a front end loader. A front end loader is a type of heavy equipment used in construction and mining industries. It is characterized by a large bucket at the front that can be raised and lowered to scoop and transport materials such as soil, gravel, or debris. The front end loader is commonly used for tasks like digging, loading, and leveling surfaces.Rate this question:
-
- 11.
Identify the figure
- A.
Roller
- B.
Fork Lift
- C.
Back Hoe
- D.
Grader
Correct Answer
A. RollerExplanation
The figure being identified in this question is a roller.Rate this question:
-
- 12.
Identify the figure
- A.
Tower crane
- B.
Telescopic Boom Lift
- C.
Mobile crane
- D.
MOBILE CONCRETE PUMP
Correct Answer
C. Mobile craneExplanation
The correct answer is "mobile crane." A mobile crane is a type of crane that is mounted on a mobile platform, such as a truck or a crawler, allowing it to be easily moved to different locations. It is commonly used in construction sites and other industrial settings for lifting and moving heavy loads. Unlike a tower crane, which is fixed in one position, a mobile crane offers greater flexibility and mobility.Rate this question:
-
- 13.
Identify the figure
- A.
Scissor Lift
- B.
Crane
- C.
Telescopic Boom Lift
- D.
Mobile Concrete Pump
Correct Answer
C. Telescopic Boom LiftExplanation
A telescopic boom lift is a type of aerial work platform that consists of a long extendable arm or boom. It is commonly used for tasks that require reaching high places, such as construction or maintenance work. The figure in question is likely a representation or image of a telescopic boom lift, which is why it is the correct answer.Rate this question:
-
- 14.
Telescopic Boom Lift
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
D. Option 4 -
- 15.
MOBILE CONCRETE PUMP
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
B. Option 2 -
- 16.
Is a special type of handsaw that has a very thin bade and makes very straight cuts such as those on trims and mouldings.
- A.
Backsaw
- B.
Ripsaw
- C.
Crosscut saw
- D.
Hacksaw
Correct Answer
A. BacksawExplanation
A backsaw is a special type of handsaw that has a very thin blade and is designed to make very straight cuts, particularly on trims and moldings. It is often used in woodworking and carpentry projects where precision and accuracy are required. The thin blade of a backsaw allows for more control and the ability to make fine, clean cuts.Rate this question:
-
- 17.
An excavator used for general digging which is usually mounted on either the crawler or truck frame.
- A.
Trencher
- B.
Front-end loader
- C.
Backhoe
- D.
Grader
Correct Answer
C. BackhoeExplanation
A backhoe is a type of excavator that is commonly used for general digging tasks. It is typically mounted on either a crawler or truck frame, providing mobility and stability during operation. Backhoes are versatile machines that can be used for a variety of tasks, such as digging trenches, loading materials, and excavating. They are equipped with a digging bucket at the back and a loader bucket at the front, allowing them to perform both digging and loading functions.Rate this question:
-
- 18.
A special kind of excavator which dogs long, narrow ditches for pipelines or cables.
- A.
Trencher
- B.
Front end loader
- C.
Backhoe
- D.
Grader
Correct Answer
A. TrencherExplanation
A trencher is a type of excavator specifically designed for digging long, narrow ditches for pipelines or cables. It is equipped with a digging chain or a rotating drum with teeth that cuts through the ground and creates a trench. This specialized equipment is commonly used in construction, agriculture, and utility work to efficiently and accurately excavate trenches for various purposes.Rate this question:
-
- 19.
A large shoveling machine that can scoop or deposit a large amount of material.
- A.
Trencher
- B.
Front end loader
- C.
Backhoe
- D.
Grader
Correct Answer
B. Front end loaderExplanation
A front end loader is a large shoveling machine that is designed to scoop or deposit a large amount of material. It is commonly used in construction and mining industries for tasks such as loading and unloading materials, digging, and leveling surfaces. The front end loader has a bucket attached to the front of the machine, which can be raised or lowered to scoop up or dump material. It is a versatile and powerful machine that is able to handle heavy loads and is commonly seen on construction sites.Rate this question:
-
- 20.
These are obtainable with depths ranging from 6” to 16” and are now commonly used instead of built-up columns in steel skeleton construction.
- A.
Starred anges
- B.
Reinforcement
- C.
Lattice column
- D.
Rolled H column
Correct Answer
D. Rolled H columnExplanation
Rolled H columns are now commonly used instead of built-up columns in steel skeleton construction. They are obtainable with depths ranging from 6" to 16" and provide the necessary reinforcement and support for the structure. Rolled H columns are a popular choice due to their strength, durability, and ease of installation. They offer structural stability and can withstand heavy loads, making them suitable for various construction projects.Rate this question:
-
- 21.
Of two four connected by batten plate spaced at intervals of 3 to 4 ft. these are used to support the light loads.
- A.
Starred angles
- B.
Built up columns
- C.
Lattice columns
- D.
Rolled up columns
Correct Answer
A. Starred anglesExplanation
Starred angles are the correct answer because they are commonly used to connect two four columns with a batten plate. These angles are spaced at intervals of 3 to 4 feet and are designed to support light loads. They provide stability and strength to the structure, making them suitable for this purpose.Rate this question:
-
- 22.
These are columns made up of a cylindrical steels pipe shell filled with 1:1-1/2:3 Portland cement concrete.
- A.
Steel Column
- B.
Lally column
- C.
Built up column
- D.
Battened column
Correct Answer
B. Lally columnExplanation
A Lally column is a type of steel column that is made up of a cylindrical steel pipe shell filled with Portland cement concrete. Lally columns are commonly used in construction to provide support and stability to structures. The concrete filling helps to increase the strength and load-bearing capacity of the column. Lally columns are often used in basements or crawl spaces to support beams and distribute the weight of the structure evenly.Rate this question:
-
- 23.
Which one do you like?
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
A. Option 1 -
- 24.
A process which employs an electric arc, wherein energy in the form of heat is supplied by establishing an arc between the base or parent metal and a metal electrode.
- A.
Groove welding
- B.
Coated electrodes
- C.
Fusion welding
- D.
Electrode welding
Correct Answer
C. Fusion weldingExplanation
Fusion welding is the correct answer because it involves the use of an electric arc to generate heat and melt the base metal and the metal electrode. This process creates a fusion between the two metals, resulting in a strong and durable weld. Groove welding, coated electrodes, and electrode welding are not as accurate because they do not specifically describe the use of an electric arc and the fusion of metals.Rate this question:
-
- 25.
Serves as a tensile reinforcement for the concrete slab to which it is bonded with embossed rib pattern.
- A.
Cellular decking
- B.
Composite decking
- C.
Form decking
- D.
Nota
Correct Answer
B. Composite deckingExplanation
Composite decking serves as a tensile reinforcement for the concrete slab due to its ability to bond with the slab using an embossed rib pattern. The embossed rib pattern provides additional strength and stability to the concrete slab, making it a suitable choice for construction projects.Rate this question:
-
- 26.
Is manufacture by welding a corrugated sheet to a steel sheet, forming a series of spaces or raceways for electrical and communication wirings.
- A.
Cellular decking
- B.
Composite decking
- C.
Form decking
- D.
Nota
Correct Answer
A. Cellular deckingExplanation
Cellular decking refers to a type of decking material that is manufactured by welding a corrugated sheet to a steel sheet, creating spaces or raceways for electrical and communication wirings. This type of decking provides a strong and durable surface for outdoor structures while also allowing for easy installation and maintenance of wiring systems. It is a popular choice for commercial and industrial buildings where efficient wiring infrastructure is essential.Rate this question:
-
- 27.
A polyurethane product made by combining a polyisocyanete and a polyester resin.
- A.
Sprayed on insulation
- B.
Blanket insulation
- C.
Formed-in place insulation
- D.
Rigid slab insulation
Correct Answer
C. Formed-in place insulationExplanation
Formed-in place insulation refers to a type of insulation that is created on-site, typically by spraying or injecting a liquid foam material into the desired area. In this case, the polyurethane product made by combining a polyisocyanate and a polyester resin is used to create the formed-in place insulation. This type of insulation is versatile and can be applied to various surfaces and structures, providing effective thermal and sound insulation properties. It is often used in construction and industrial applications to improve energy efficiency and reduce heat transfer.Rate this question:
-
- 28.
Double reinforced beam use for long spans
- A.
Cantilever beam
- B.
Hollow box girder
- C.
Beam with compression reinforcement
- D.
Corbels
Correct Answer
D. CorbelsExplanation
Corbels are used to support or strengthen a structure, typically in the form of a projection from a wall. They are commonly used to support beams in long spans, providing additional reinforcement and stability. Unlike cantilever beams, hollow box girders, or beams with compression reinforcement, corbels specifically serve the purpose of supporting beams in long spans. Therefore, corbels are the correct answer in this case.Rate this question:
-
- 29.
These are piles usually moulded in a yard or at the site allowed to cure for 4 week before using.
- A.
Cast-in-place piles
- B.
Cased piles
- C.
Steel-pipe piles
- D.
Pre-cast piles
Correct Answer
D. Pre-cast pilesExplanation
Pre-cast piles are piles that are made in a yard or at the site and allowed to cure for 4 weeks before being used. This means that they are manufactured ahead of time and then transported to the construction site. This method allows for better quality control and ensures that the piles are fully cured and ready to be used when they are needed. It also allows for faster construction as the pre-cast piles can be installed immediately without the need for curing time on-site.Rate this question:
-
- 30.
_____are the continuous spread footings of foundation walls.
- A.
Strip footings
- B.
Mat footings
- C.
Combined footing
- D.
Continuous footing
Correct Answer
A. Strip footingsExplanation
Strip footings are the continuous spread footings of foundation walls. They are long and narrow footings that are used to support a load-bearing wall or a row of closely spaced columns. Strip footings distribute the load from the wall or columns evenly along their length, providing stability and preventing settlement. They are commonly used in residential and commercial construction where the load-bearing walls are parallel to each other. Strip footings are cost-effective and efficient in transferring the load to the underlying soil, making them a suitable choice for many construction projects.Rate this question:
-
- 31.
This type of footing maybe used in place of a combined footing under the same condition. Footings of the interior and the exterior columns are connected by a tie beam.
- A.
Block footing
- B.
Continuous footing
- C.
Combined footing
- D.
Cantilevered footing
Correct Answer
D. Cantilevered footingExplanation
A cantilevered footing may be used in place of a combined footing under the same condition when the footings of the interior and exterior columns are connected by a tie beam. A cantilevered footing is a type of footing that extends beyond the column it supports, providing additional stability and support. This design allows for the transfer of load from the exterior column to the interior column through the tie beam, eliminating the need for a combined footing.Rate this question:
-
- 32.
Strap Footing
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
B. Option 2 -
- 33.
Cantilever footing
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
C. Option 3 -
- 34.
Identify the figure
- A.
Strip Footing
- B.
Mat Footing
- C.
Continuous footing
- D.
Combined footing
Correct Answer
B. Mat FootingExplanation
Mat footing is a type of foundation that is used to support heavy loads and distribute them evenly over a larger area. It is a flat, thick concrete slab that is reinforced with steel bars and extends over the entire area of the structure. Mat footings are commonly used in buildings with multiple columns or in structures located in areas with poor soil conditions. They provide stability and prevent differential settlement by spreading the load over a larger area. Mat footings are also known as raft footings and are often used in high-rise buildings, bridges, and industrial structures.Rate this question:
-
- 35.
Identify the figure
- A.
Angle grinding
- B.
Belt Sander
- C.
Circular Saw
- D.
Cut-off saw
Correct Answer
C. Circular SawExplanation
The figure being identified in this question is a circular saw. A circular saw is a power tool that uses a circular blade to cut various materials such as wood, metal, or plastic. It is commonly used in construction and woodworking projects for making straight cuts. Unlike a belt sander, angle grinding, or cut-off saw, a circular saw has a round blade that rotates in a circular motion to make precise cuts.Rate this question:
-
- 36.
Uses to (hollow out) an area in relatively hard material like wood or plastic. Mainly used in woodworking, especially cabinetry. Typically handheld or fastened cutting.
- A.
Planar
- B.
Router
- C.
Circular Saw
- D.
Trimmer
Correct Answer
B. RouterExplanation
A router is a tool that is used to hollow out an area in relatively hard materials like wood or plastic. It is mainly used in woodworking, especially in cabinetry. The router can be handheld or fastened for cutting purposes.Rate this question:
-
- 37.
Identify the Figure
- A.
Dry Wall Screw Driver
- B.
Reciprocating saw
- C.
Rotary Drill Hammer
- D.
Demolition Hammer
Correct Answer
D. Demolition HammerExplanation
The given options are different types of tools. A drywall screwdriver is used for driving screws into drywall, a reciprocating saw is used for cutting through various materials, a rotary drill hammer is used for drilling holes in hard surfaces, and a demolition hammer is used for breaking and demolishing structures. Therefore, the correct answer is Demolition Hammer, as it is the only tool specifically designed for demolition purposes.Rate this question:
-
- 38.
Identify the figure
- A.
Rotary Drill
- B.
Demolition Hammer
- C.
Drywall Screw
- D.
Reciprocating Screw
Correct Answer
C. Drywall ScrewExplanation
The given options are Rotary Drill, Demolition Hammer, Drywall Screw, and Reciprocating Screw. The correct answer is Drywall Screw. A drywall screw is a type of screw that is specifically designed for attaching drywall panels to wooden or metal frames. It has a sharp point and a coarse thread, which allows it to easily penetrate and secure the drywall. The other options, such as the rotary drill, demolition hammer, and reciprocating screw, are different tools used for various purposes and are not specifically designed for attaching drywall.Rate this question:
-
- 39.
Identify the figure
- A.
Dry Wall Screw Driver
- B.
Demolition Hammer
- C.
Rotary Hammer
- D.
Ange Grinding
Correct Answer
C. Rotary HammerExplanation
A rotary hammer is a power tool used for drilling and chiseling hard materials such as concrete, stone, or masonry. It is different from a regular hammer drill as it has a special mechanism that provides a hammering action in addition to the rotary motion. This allows it to deliver more powerful blows, making it suitable for heavy-duty tasks like drilling large holes or breaking up concrete. Therefore, the correct answer is Rotary Hammer.Rate this question:
-
- 40.
Identify the figure
- A.
Nail Gun
- B.
Rotary Hammer
- C.
Drill
- D.
Demolition Hammer
Correct Answer
A. Nail GunExplanation
The correct answer is Nail Gun. A nail gun is a tool used to drive nails into wood or other materials. It is a handheld device that uses compressed air, electromagnetism, or combustion to forcefully shoot nails into the surface. This tool is commonly used in construction and carpentry projects to increase efficiency and accuracy in fastening materials together.Rate this question:
-
- 41.
Which one do you like?
- A.
Drywall screw driver
- B.
Belt Sander
- C.
Trimmer
- D.
Demolition Hammer
Correct Answer
C. TrimmerExplanation
The given question asks for a personal preference among the options listed. The correct answer, "Trimmer," suggests that the person prefers or likes using a trimmer compared to the other options. However, without further context or information, it is difficult to determine the exact reason for this preference.Rate this question:
-
- 42.
Identify the figure
- A.
Angle Grinding
- B.
Planer
- C.
Miter Saw
- D.
Circular Saw
Correct Answer
C. Miter SawExplanation
The figure being identified is a Miter Saw. It is used for making precise crosscuts and miters in wood or other materials. It has a circular blade that can be angled and adjusted to make angled cuts. The other options mentioned, such as Angle Grinding and Planer, are different tools used for different purposes.Rate this question:
-
- 43.
Identify the figure
- A.
Welding Machine
- B.
Vibrator
- C.
Concrete Mixer
- D.
RC Steel Bar Bending Machine
Correct Answer
D. RC Steel Bar Bending MachineExplanation
The figure being identified is an RC Steel Bar Bending Machine. This type of machine is commonly used in construction to bend reinforced steel bars into desired shapes and angles. It is an essential tool in reinforcing concrete structures and ensuring their strength and durability.Rate this question:
-
- 44.
Identify the figure
- A.
Concrete cutter (Wet)
- B.
Concrete cutter (Dry)
- C.
Circular Saw
- D.
Top Handle Jig Saw
Correct Answer
A. Concrete cutter (Wet)Explanation
The figure in question is a concrete cutter (Wet). This tool is specifically designed for cutting through concrete and other hard materials. The term "wet" indicates that water is used during the cutting process to cool down the blade and minimize dust. This helps to prolong the life of the blade and prevent overheating. The other options listed, such as a concrete cutter (Dry), circular saw, and top handle jig saw, are not specifically designed for cutting through concrete and do not require the use of water during operation.Rate this question:
-
- 45.
Identify the figure
- A.
Circular Saw
- B.
Concrete cutter (wet)
- C.
Concrete cutter (Dry)
- D.
Miter Saw
Correct Answer
C. Concrete cutter (Dry)Explanation
The figure in question is a concrete cutter (Dry). This type of concrete cutter is typically used for cutting through concrete without the use of water. It is designed to make precise cuts in concrete surfaces and is commonly used in construction and demolition projects. The other options, such as circular saw, miter saw, and concrete cutter (wet), are not suitable for this type of cutting task.Rate this question:
-
- 46.
Which one do you like?
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
A. Option 1 -
- 47.
Bench Drill
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
C. Option 3 -
- 48.
Miter Saw
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
A. Option 1 -
- 49.
Concrete Cutter (Wet Cutting)
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
B. Option 2Explanation
Explanation not available.Rate this question:
-
- 50.
Concrete Cutter (Dry Cutting)
- A.
Option 1
- B.
Option 2
- C.
Option 3
- D.
Option 4
Correct Answer
A. Option 1 -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
May 24, 2018Quiz Created by
Rogerrino_08
Back to top