Safety Month Celebration 2019 Quiz - Delhi Cluster Pt&d Ic
- 1.
- National Safety day/week Awareness Campaign is celebrated on:
- A.
) 4th- 10th January
- B.
4th- 10th June
- C.
4th- 10th May
- D.
) 4th- 10th March
Correct Answer
D. ) 4th- 10th MarchExplanation
The National Safety day/week Awareness Campaign is celebrated from 4th to 10th March. This campaign is aimed at promoting awareness and importance of safety in various aspects of life, including workplace safety, road safety, and personal safety. It serves as a reminder for individuals and organizations to prioritize safety measures and take necessary precautions to prevent accidents and injuries.Rate this question:
- 2.
IMS means:
- A.
International Management System
- B.
) Indian Management System
- C.
Integrated Management system
- D.
None
Correct Answer
C. Integrated Management systemExplanation
IMS stands for Integrated Management System. This system combines different management systems, such as quality management, environmental management, and health and safety management, into one cohesive framework. By integrating these systems, organizations can streamline their processes, improve efficiency, and ensure compliance with various standards and regulations.Rate this question:
-
- 3.
Which comes under Planning Stages of IMS Manual?
- A.
Internal EHS Audit
- B.
Management Review
- C.
Safe work Method
- D.
Project EHS Plan
Correct Answer
D. Project EHS PlanExplanation
The Project EHS Plan comes under the Planning Stages of the IMS Manual. This plan is specifically designed for individual projects and outlines the environmental, health, and safety measures that need to be implemented throughout the project's lifecycle. It includes strategies, procedures, and guidelines to ensure that the project is carried out in a safe and environmentally responsible manner. The plan is developed during the planning stage to identify potential risks and hazards and to establish controls and mitigation measures to address them.Rate this question:
-
- 4.
Corrective actions are:
- A.
Action to eliminate the cause of a Potential Non-conformity
- B.
Action to eliminate the cause of a detected Non-conformity
- C.
A & b
- D.
None
Correct Answer
B. Action to eliminate the cause of a detected Non-conformityExplanation
The correct answer is "Action to eliminate the cause of a detected Non-conformity." This means that corrective actions are taken to address and resolve any identified non-conformities or deviations from established standards or requirements. These actions aim to identify the root cause of the non-conformity and implement measures to prevent its recurrence in the future. The corrective actions are focused on addressing the specific issue that has been detected and taking steps to rectify it.Rate this question:
-
- 5.
PEP talk stands for:
- A.
Pro-active talks
- B.
Pre implementation personal talks
- C.
Post implementation personal talks
- D.
None
Correct Answer
B. Pre implementation personal talksExplanation
PEP talk stands for Pre implementation personal talks. This term refers to the conversations or discussions that take place before the implementation of a particular plan or project. These talks are typically focused on preparing individuals for the upcoming implementation, addressing any concerns or questions, and providing guidance and support. PEP talks aim to ensure that everyone involved is well-informed and prepared for the implementation process.Rate this question:
-
- 6.
Maximum safe Limit of current for an adult in Mili Ampere
- A.
10mA
- B.
30mA
- C.
50mA
- D.
100mA
Correct Answer
B. 30mAExplanation
The maximum safe limit of current for an adult is 30mA. This means that if the current passing through an adult's body exceeds 30mA, it can be potentially harmful and may cause electric shock or other injuries. It is important to ensure that electrical devices and circuits are properly designed and maintained to prevent currents above this limit from flowing through the body.Rate this question:
-
- 7.
OHSAS deals:
- A.
14001
- B.
18001
- C.
9001
- D.
All
Correct Answer
B. 18001Explanation
OHSAS 18001 is a standard that deals with occupational health and safety management systems. This standard provides a framework for organizations to identify and control their health and safety risks, reduce accidents and improve overall performance. It focuses on creating a safe and healthy work environment for employees and other stakeholders. OHSAS 18001 is applicable to all types of organizations, regardless of their size or industry. It helps organizations comply with legal requirements, enhance their reputation, and demonstrate their commitment to health and safety.Rate this question:
-
- 8.
Hazardous waste storage in:
- A.
Blue colour dustbin
- B.
Green colour dustbin
- C.
Red colour dustbin
- D.
Black colour dustbin
Correct Answer
C. Red colour dustbinExplanation
The correct answer is the red colour dustbin. This is because hazardous waste should be stored separately from regular waste to prevent contamination and potential harm to human health and the environment. Red colour is commonly used to indicate danger or hazardous materials, so using a red colour dustbin for hazardous waste storage helps to easily identify and differentiate it from other waste.Rate this question:
-
- 9.
Preliminary Incident report to be submitted
- A.
Within 48 hours
- B.
Within 12 hours
- C.
Within 24 hours
- D.
Within one month
Correct Answer
B. Within 12 hoursExplanation
The correct answer is within 12 hours. This means that the preliminary incident report needs to be submitted within 12 hours of the incident occurring. This is likely because it is important to gather and document information about the incident as soon as possible in order to ensure accuracy and prompt action. Waiting longer than 12 hours may result in the loss or distortion of important details.Rate this question:
-
- 10.
Hazard may be defined as:
- A.
Surroundings in which operations carried out, including air, water, land, natural resources, flora, fauna, humans, and their interrelation.
- B.
Element of an organization’s activities or products or services that can interact with the environment.
- C.
Any change to the environment, whether adverse or beneficial, wholly or partially resulting from an organization's environmental aspects.
- D.
Source, situation, or act with a potential for harm in terms of human injury or ill health or a combination of these
Correct Answer
D. Source, situation, or act with a potential for harm in terms of human injury or ill health or a combination of theseExplanation
Hazard may be defined as a source, situation, or act that has the potential to cause harm to human health or result in injury, or a combination of both. This definition encompasses any element of an organization's activities, products, or services that can interact with the environment and cause adverse or beneficial changes. It also includes the surroundings in which operations are carried out, such as air, water, land, natural resources, flora, fauna, and humans, as well as their interrelation.Rate this question:
-
- 11.
Near Miss Case may be defined as:
- A.
Process of evaluating the risk(s) arising from a hazard(s), taking into account the adequacy of any existing controls, and deciding whether or not the risk(s) is acceptable
- B.
Combination of the likelihood of an occurrence of a hazardous event or exposure(s) and the severity of injury or ill health that can be caused by the event or exposure(s).
- C.
An injury causing death or disablement of the injured person for 48 hours or more excluding the day of the shift on which the accident occurred.
- D.
An incident where no injury, ill health or fatality occurs
Correct Answer
D. An incident where no injury, ill health or fatality occursExplanation
The correct answer is "An incident where no injury, ill health or fatality occurs" because a near miss case refers to an incident where there was a potential for harm or injury, but fortunately, no actual harm or injury occurred. It is an important concept in risk assessment and management as it allows organizations to identify and address potential hazards before they result in actual harm to people or property.Rate this question:
-
- 12.
Severity Rate is:
- A.
Frequency Rate X Severity Rate -------------------------------------------- Risk Index
- B.
Number of First Aid Cases per million man hours worked.
- C.
Number of man days lost due to reportable lost time injuries per million man-hours worked
- D.
Number of reportable lost time injuries per million man hours worked.
Correct Answer
C. Number of man days lost due to reportable lost time injuries per million man-hours workedExplanation
Severity Rate is a measure of the average number of man days lost due to reportable lost time injuries per million man-hours worked. It takes into account the severity of injuries and the impact they have on the workforce. This rate helps assess the level of risk and the potential impact on productivity and resources. A higher severity rate indicates a greater impact on the workforce and a need for further investigation and improvement in safety measures.Rate this question:
-
- 13.
Integrated Management System Manual
- A.
Act as the apex manual, conforming to the requirements of ISO 9001:2008, ISO 14001:2015 & BS OHSAS 18001:2007 as well as operating manual.
- B.
Define & describe the EHS Management system
- C.
Define the authorities, responsibilities & accountabilities of personnel having effect on the Environment, Health & Safety risks.
- D.
All
Correct Answer
D. AllExplanation
The Integrated Management System Manual serves as the apex manual that adheres to the requirements of ISO 9001:2008, ISO 14001:2015, and BS OHSAS 18001:2007. It also functions as an operating manual. The manual defines and describes the EHS Management system and outlines the authorities, responsibilities, and accountabilities of personnel who have an impact on the Environment, Health, and Safety risks. Therefore, the correct answer is "All," indicating that all of the mentioned points are included in the Integrated Management System Manual.Rate this question:
-
- 14.
Management Review Meeting at IC Level:
- A.
Once in a six month
- B.
Once in a month
- C.
Once in a three month
- D.
Once in a year
Correct Answer
A. Once in a six monthExplanation
The correct answer is "Once in a six month" because a management review meeting at the IC (Internal Control) level is typically held every six months. This allows for regular assessment and evaluation of the effectiveness of internal controls within the organization. Holding these meetings more frequently (e.g., once a month) may be too burdensome and time-consuming, while holding them less frequently (e.g., once a year) may not provide sufficient oversight and monitoring of internal controls. Therefore, a six-month interval strikes a balance between ensuring regular review and avoiding excessive administrative burden.Rate this question:
-
- 15.
RoSPA Award is accredited by:
- A.
India
- B.
NSC
- C.
UK
- D.
USA
Correct Answer
C. UKExplanation
The RoSPA Award is accredited by the UK. This means that the award is recognized and endorsed by the United Kingdom.Rate this question:
-
- 16.
The safe limit of sound (Noise) for working for 8 hours (in decibels - db) in industries.
- A.
90dB
- B.
80dB
- C.
100dB
- D.
70dB
Correct Answer
A. 90dBExplanation
The safe limit of sound (noise) for working for 8 hours in industries is 90dB. This means that exposure to noise levels above 90dB for an extended period of time can be harmful to workers' hearing. It is important to maintain sound levels within this limit to prevent potential hearing damage and ensure a safe working environment.Rate this question:
-
- 17.
The three sides of fire triangle are
- A.
Fuel, Oxygen, paper
- B.
Air, naked fire, Heat
- C.
Heat, Fuel, Air
- D.
Oil, cloth, Spark
Correct Answer
C. Heat, Fuel, AirExplanation
The three sides of the fire triangle are heat, fuel, and air. Heat is necessary to raise the temperature of the fuel to its ignition point. Fuel provides the material that can burn and sustain the fire. Air, specifically oxygen, is needed to support the combustion process by supplying the necessary oxygen molecules. Without any one of these three elements, a fire cannot start or continue to burn.Rate this question:
-
- 18.
What will be the maximum safe lifting capacity of 1/2" wire rope?
- A.
1 Ton
- B.
1.5 Ton
- C.
2.0 Ton
- D.
2.5 Ton
Correct Answer
C. 2.0 TonExplanation
The maximum safe lifting capacity of a 1/2" wire rope is 2.0 Ton.Rate this question:
-
- 19.
What is the maximum voltage of electrical apparatus that can be used in confined space?
- A.
24 v
- B.
12v
- C.
110v
- D.
20v
Correct Answer
A. 24 vExplanation
The maximum voltage of electrical apparatus that can be used in a confined space is 24v.Rate this question:
-
- 20.
- What should be the minimum & maximum percentage of oxygen in confined area?
- A.
18.5 – 21.5%
- B.
19.5 – 23.0 %
- C.
18.5 – 24.0%
- D.
19.5 – 27.0%
Correct Answer
B. 19.5 – 23.0 %Explanation
The minimum and maximum percentage of oxygen in a confined area should be between 19.5% and 23.0%.Rate this question:
- 21.
Our corporate Environment, Health & Safety (EHS) policy is signed by
- A.
Project Manager
- B.
BU Head
- C.
GM & EHS Head
- D.
Group Executive Chairman
Correct Answer
D. Group Executive ChairmanExplanation
The EHS policy is signed by the Group Executive Chairman because they hold the highest position in the corporate hierarchy and have the authority to approve and enforce policies. As the top-level executive, the Group Executive Chairman is responsible for overseeing all aspects of the organization, including environmental, health, and safety matters. Their signature signifies their commitment to prioritizing EHS concerns and ensuring compliance throughout the company.Rate this question:
-
- 22.
What should be the minimum horizontal clearance for 33kV live line
- A.
1.2 Mtr
- B.
3.0 Mtr
- C.
3.8 Mtr
- D.
4.0 Mtr
Correct Answer
A. 1.2 MtrExplanation
The minimum horizontal clearance for a 33kV live line should be 1.2 Mtr. This means that there should be a distance of at least 1.2 meters between the live line and any other object or surface in a horizontal direction. This clearance is necessary to ensure safety and prevent any contact or interference with the live line, which carries high voltage electricity.Rate this question:
-
- 23.
As per SOP Length of the derrick pole should be the tide with the tower leg
- A.
1/2 length
- B.
1/3 length
- C.
1/4 length
- D.
2/3 length
Correct Answer
B. 1/3 lengthExplanation
The correct answer is 1/3 length. The statement suggests that the length of the derrick pole should be one-third the length of the tower leg. This implies that the derrick pole should be shorter than the tower leg to maintain stability and balance.Rate this question:
-
- 24.
What should be the minimum distance between the two 'U' Clamps (Bull Dog Clamp)
- A.
3 Dia of wire rope
- B.
4 Dia of wire rope
- C.
5 Dia of wire rope
- D.
6 Dia of wire rope
Correct Answer
D. 6 Dia of wire ropeExplanation
The minimum distance between the two 'U' clamps (Bull Dog Clamp) should be 6 times the diameter of the wire rope. This is because the clamps need to be spaced apart sufficiently to ensure proper gripping and secure fastening of the wire rope. Increasing the distance between the clamps helps distribute the load evenly and reduces the risk of slippage or failure. Therefore, the correct answer is 6 Dia of wire rope.Rate this question:
-
- 25.
What is the Cardinal Rule -2
- A.
Hook the Hardness
- B.
Suspend the Activity immediately for poor weather condition
- C.
LOTO
- D.
None of the above
Correct Answer
C. LOTOExplanation
The correct answer is LOTO. LOTO stands for Lockout-Tagout, which is a safety procedure used to ensure that dangerous machines are properly shut off and not able to be started up again until maintenance or repair work is completed. It involves isolating the energy source of the machine and placing a lock or tag on it to prevent accidental activation. This procedure helps to prevent accidents and injuries caused by unexpected start-up of machines during maintenance or repair activities.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 24, 2019Quiz Created by
RAJASEKAR R
- Abdomen Quizzes
- Addiction Quizzes
- Aging Quizzes
- Arthritis Quizzes
- Beauty Quizzes
- Blood Quizzes
- Body Quizzes
- Bone Quizzes
- Brain Quizzes
- Child Health Quizzes
- Dermatology Quizzes
- Digestive System Quizzes
- Disease Quizzes
- Fertility Quizzes
- First Aid Quizzes
- Hair care Quizzes
- Health And Nutrition Quizzes
- Health And Wellness Quizzes
- Health Policy Quizzes
- Health Psychology Quizzes
- Health Worldwide Quizzes
- Hearing Quizzes
- Heart Quizzes
- Hospital Quizzes
- Illness Quizzes
- Injury Quizzes
- Kidney Quizzes
- Liver Quizzes
- Lung Quizzes
- Mental Health Quizzes
- Nose Quizzes
- Nutrition Quizzes
- Obesity Quizzes
- Ophthalmology Quizzes
- Patient Quizzes
- Patient care Quizzes
- Pharmacy Quizzes
- Pregnancy Quizzes
- Puberty Quizzes
- Public Health Quizzes
- Respiratory System Quizzes
- Sleep Quizzes
- Stress Quizzes
- Surgery Quizzes
- Surgical Instruments Quizzes
- Throat Quizzes
- Weight Quizzes
- Wellness Quizzes
Back to top