1.
How often should a vehicle have an oil change?
Correct Answer
B. Once every 6 months.
Explanation
The correct answer is once every 6 months. Vehicles should have their oil changed every 6 months to ensure optimal engine performance and longevity. Regular oil changes help remove dirt and contaminants from the engine, prevent engine wear, and maintain proper lubrication. Waiting longer than 6 months can lead to oil breakdown, reduced engine efficiency, and potential damage. It is important to follow the manufacturer's recommendations and consider factors such as driving conditions and mileage when determining the frequency of oil changes.
2.
What is a tire rotation?
Correct Answer
C. Changing the position of the tires on a vehicle to ensure even ware.
Explanation
Tire rotation refers to the practice of changing the position of the tires on a vehicle to ensure even wear. This is done by moving the tires from one position to another, such as moving the front tires to the back and vice versa. By rotating the tires, the wear is distributed more evenly across all tires, which can help prolong their lifespan and improve overall performance and safety of the vehicle.
3.
If the light pictured here appears on your dashboard, what does it mean?
Correct Answer
B. The engine needs to be checked.
Explanation
The correct answer is "The engine needs to be checked." This is indicated by the picture of the light on the dashboard. When this light appears, it means that there is a problem with the engine and it needs to be inspected and possibly repaired.
4.
A red light appearing on your dashboard means you should pull over and call for assistance.
Correct Answer
A. True
Explanation
A red light appearing on your dashboard typically indicates a serious issue with your vehicle that requires immediate attention. It could indicate problems with the engine, brakes, or other critical systems. Pulling over and calling for assistance is the appropriate action to ensure your safety and prevent further damage to the vehicle. Ignoring the red light and continuing to drive can lead to more severe problems and potentially put you and others at risk.
5.
Which of the following depicts where washer fluid should be added?
Correct Answer
C.
6.
What is the name of this part?
Correct Answer
D. Crank Shaft
Explanation
The correct answer is Crank Shaft. The crankshaft is a component in an engine that converts the reciprocating motion of the pistons into rotational motion. It is responsible for transmitting power from the pistons to the transmission, which then drives the wheels of the vehicle. The crankshaft is typically made of hardened steel and has several bearing journals and crankpins along its length. It is a crucial part of the engine's operation and plays a vital role in the overall performance and efficiency of the vehicle.
7.
What is the name of this part?
Correct Answer
A. Brake Pads
Explanation
The correct answer is Brake Pads. Brake pads are a crucial component of a vehicle's braking system. They are made of friction material and are designed to press against the brake rotors when the brakes are applied, creating the necessary friction to slow down or stop the vehicle. Engine pads and wheel kits are not relevant to the braking system, while brake rotors are the component that the brake pads press against.
8.
How often should your front and rear brakes be serviced?
Correct Answer
C. Once every 12 months
Explanation
Front and rear brakes should be serviced once every 12 months. This is because regular maintenance helps to ensure that the brakes are in good working condition and can effectively stop the vehicle when needed. By servicing the brakes annually, any potential issues or wear can be identified and addressed before they become more serious problems. This helps to maintain the safety and performance of the braking system.
9.
How is a spare tire accessed?
Correct Answer
D. All of the above.
Explanation
The correct answer is "All of the above." This means that the spare tire can be accessed in three different ways depending on the vehicle. It can either be in the trunk, under the bed of the vehicle on a tire hoist, or under the center console on a tire hoist.
10.
Between which two months should you use studded tires (Ontario)?
Correct Answer
C. September to May
Explanation
In Ontario, studded tires should be used between September and May. This is because during this period, the weather conditions can be harsh, with snow and ice on the roads. Studded tires provide better traction and grip on slippery surfaces, making them essential for safe driving in winter months. Using studded tires outside of this period may not be necessary as the weather conditions improve, and it may also cause unnecessary wear and tear on the tires.
11.
Where can you learn about manufacturer recalls?
Correct Answer
D. All of the above
Explanation
You can learn about manufacturer recalls within the dealership, through the MTO website, and through the GM website. All of these sources provide information on recalls, allowing you to stay updated on any potential issues with your vehicle.
12.
The recommended tire pressure can be found inside the door panel.
Correct Answer
A. True
Explanation
The recommended tire pressure can be found inside the door panel. This is because the door panel often contains a sticker or label that provides important information about the vehicle, including the recommended tire pressure. It is important to follow this recommended pressure to ensure optimal performance, safety, and fuel efficiency of the vehicle.
13.
What is the purpose of a block heater?
Correct Answer
B. To keep the vehicle engine warm in the winter.
Explanation
A block heater is used to keep the vehicle engine warm in the winter. When the temperature drops, the engine can become cold and difficult to start. The block heater is connected to the engine block and warms the coolant, which in turn keeps the engine warm. This helps to ensure that the engine starts easily and reduces wear and tear on the engine components. Additionally, a warm engine is more fuel-efficient and produces fewer emissions.