1.
When should all drivers undergo refresher training?
Correct Answer
B. Once in two years or even earlier, as decided by the driver’s supervisor
Explanation
All drivers should undergo refresher training once in two years or even earlier, as decided by the driver's supervisor. This is because refresher training helps drivers to update their skills, knowledge, and understanding of road safety regulations. It ensures that drivers are aware of any new laws or regulations that may have been implemented since their initial training. Additionally, it allows supervisors to assess the performance and competence of drivers regularly and address any areas that may need improvement. Regular refresher training helps to maintain a high standard of driving and promotes safe practices on the road.
2.
How should the chokes be applied for parked Heavy Vehicles and Light Commercial Vehicles that are right-hand drives?
Correct Answer
D. They must have at least two wheel chocks (Right Front Front and Left Rear Rear), with parking brakes applied and the keys removed.
3.
While driving, if the driver wishes to use a mobile, he can:
Correct Answer
D. None of the above can be used.
Explanation
The correct answer is "None of the above can be used" because it is illegal and unsafe for a driver to use a mobile phone while driving, regardless of the mode or method used. Using a mobile phone can distract the driver and increase the risk of accidents. It is important for drivers to focus on the road and prioritize safety.
4.
In wet roads conditions, a vehicle requires
Correct Answer
A. More distance to stop
Explanation
In wet road conditions, the surface becomes slippery due to the presence of water, reducing the friction between the tires and the road. This lack of friction makes it harder for the tires to grip the road, resulting in a longer stopping distance for the vehicle. Therefore, in wet road conditions, a vehicle requires more distance to come to a complete stop compared to dry road conditions.
5.
While transporting hazardous material, the driver must carry
Correct Answer
A. TREM card
Explanation
The correct answer is TREM card. When transporting hazardous materials, it is essential for the driver to carry a Transportation Emergency Response Plan (TREM) card. This card contains crucial information about the hazardous material being transported, including its identification, potential hazards, emergency response procedures, and contact information for emergency response agencies. The TREM card helps ensure that the driver and emergency responders have access to the necessary information and can take appropriate actions in case of an incident or accident involving the hazardous material.
6.
Speed limits from Load body to ERC gate.
Correct Answer
B. 25 km/hr
Explanation
The correct answer is 25 km/hr. This suggests that the speed limit from the load body to the ERC gate is 25 km/hr.
7.
While entering LPG yard storage, the vehicle silencer must have
Correct Answer
C. Spark arrestor
Explanation
When entering the LPG yard storage, it is important for the vehicle silencer to have a spark arrestor. This is because a spark arrestor is designed to prevent sparks or hot particles from being emitted from the vehicle's exhaust system. In an environment where flammable gases like LPG are present, a spark can potentially ignite the gas and cause a fire or explosion. Therefore, a spark arrestor helps to minimize the risk of ignition by trapping and extinguishing any sparks that may be produced by the vehicle's exhaust system.
8.
With the increase in speed, the angle of vision
Correct Answer
D. Reduces proportionately
Explanation
As speed increases, the angle of vision reduces proportionately. This is because at higher speeds, objects appear to move faster and therefore have less time to be observed within the field of vision. This reduction in the angle of vision can lead to a narrower and more focused view, limiting the peripheral vision and potentially increasing the chances of missing important details or hazards on the road.
9.
Amber light means
Correct Answer
C. The red light is approaching in 3 seconds. Be ready to stop.
Explanation
Amber light indicates that the red light will be appearing in 3 seconds, so it is a warning for drivers to prepare to stop. It is not an extension of the green light, nor does it imply that one should increase speed or watch out for a policeman.
10.
Compulsory signs are exhibited in what shape?
Correct Answer
A. Circular shape.
Explanation
Compulsory signs are exhibited in a circular shape. This shape is used to easily catch the attention of drivers and convey a mandatory action or restriction on the road. The circular shape is universally recognized as a sign that requires compliance, making it an effective way to communicate important information to drivers.
11.
Road Safety warning signs should be located approximately ________ meters in advance of Hazards.
Correct Answer
C. 75 – 100 meters
Explanation
Road Safety warning signs should be located approximately 75-100 meters in advance of hazards. This distance allows drivers enough time to react and adjust their speed or maneuver safely when approaching a potential hazard on the road. Placing the signs too close to the hazard may not give drivers enough time to respond, while placing them too far away may not effectively communicate the presence of the hazard in a timely manner. Therefore, a distance of 75-100 meters is considered optimal for ensuring road safety.
12.
The maximum speed limit for vehicles on the shop floor is
Correct Answer
D. Not more than Walking speed
Explanation
The correct answer is "Not more than Walking speed" because the shop floor is a confined space where there are usually many obstacles and pedestrians. Allowing vehicles to go faster than walking speed would increase the risk of accidents and injuries. Therefore, it is important to enforce a speed limit that is no higher than the speed at which a person can walk to ensure the safety of everyone in the area.
13.
Are the Government traffic rules applicable on TML premises?
Correct Answer
B. Applicable
Explanation
The correct answer is "Applicable." This means that the government traffic rules are indeed applicable on TML premises. This implies that individuals must adhere to the traffic rules set by the government even within the premises of TML.
14.
As per TML SD&VTS standards – Daily travel on Highways shall not exceed.
Correct Answer
B. 350 kms
Explanation
According to TML SD&VTS standards, the daily travel on highways should not exceed 350 kms. This means that it is recommended to limit the distance traveled on highways to 350 kms per day. This could be due to safety concerns, fatigue management, or other factors that may affect the driver's performance and well-being. By adhering to this standard, the risk of accidents or incidents caused by exhaustion or excessive driving can be minimized.
15.
This is the sign for ________.
Correct Answer
B. Narrow bridge
Explanation
The given sign indicates a narrow bridge. This sign is commonly used to warn drivers that they are approaching a bridge with limited width, requiring caution and potentially slower speeds. It is important for drivers to be aware of this sign and adjust their driving accordingly to ensure safe passage over the narrow bridge.
16.
While traveling, the motorist must maintain at least a _______ seconds the following distance.
Correct Answer
D. 4 second
Explanation
While traveling, it is important for motorists to maintain a safe following distance to ensure they have enough time to react to any sudden changes in traffic. The recommended following distance is at least 4 seconds. This means that the motorist should stay at least 4 seconds behind the vehicle in front of them. This allows for enough time to brake and avoid a collision if necessary.
17.
Before getting into a vehicle, you should
Correct Answer
B. Do a walk-around inspection
Explanation
Before getting into a vehicle, it is important to do a walk-around inspection. This involves visually inspecting the vehicle from all sides to check for any potential issues or hazards. By doing a walk-around inspection, you can ensure that the vehicle is in proper working condition, such as checking for any flat tires, leaks, or damage. This step is crucial for your safety and the safety of others on the road, as it helps identify any potential problems that may affect the vehicle's performance or pose a risk while driving.
18.
Use of hand signal/ indicator – to show signs of turning before.
Correct Answer
A. 5 seconds
Explanation
The correct answer is 5 seconds because it is the recommended amount of time to signal before making a turn. Signaling in advance allows other drivers and pedestrians to anticipate the upcoming turn and adjust their actions accordingly, promoting safer road interactions. It gives everyone enough time to react and make appropriate decisions, reducing the risk of accidents or misunderstandings on the road.
19.
During night driving, ensure that others see you, so
Correct Answer
D. All the above
Explanation
During night driving, it is important to ensure that others can see you to avoid accidents. Wearing a fluorescent or bright dress increases your visibility on the road. On the other hand, wearing a black dress can make it difficult for other drivers to spot you. Additionally, using all the blinkers and warning signs when stopping alerts other drivers of your intentions, further enhancing safety. Therefore, all of the above options are necessary to make yourself visible and reduce the risk of accidents during night driving.
20.
Zebra/ cross walkways of the road are the property of
Correct Answer
B. Pedestrians
Explanation
Crosswalks or zebra crossings are designated areas on the road that are specifically for pedestrians to safely cross the road. They are marked with white stripes and often have additional signage. Therefore, it can be inferred that the property of these crosswalks belongs to pedestrians, as they are intended for their use and safety.
21.
This is the sign for
Correct Answer
C. Give way
Explanation
The correct answer is "Give way." In traffic signs, the "Give way" sign is used to indicate that drivers must yield or give priority to other vehicles approaching from a different direction. This sign is typically placed at intersections or junctions where drivers need to wait for a safe gap in traffic before proceeding. It is important to understand and obey this sign to ensure smooth and safe traffic flow.
22.
Defensive Driving is
Correct Answer
A. An attitude about driving
Explanation
Defensive driving is an attitude about driving that involves being cautious, alert, and proactive on the road. It is not something that is required at all times, but it is highly recommended for all drivers to practice defensive driving techniques to ensure their safety and the safety of others. Defensive driving is not a way to drive faster, as it focuses on minimizing risks and avoiding accidents. While it may not be required by law in all places, many jurisdictions have laws and regulations that encourage or mandate defensive driving practices.
23.
Driving in a truck blind spot means
Correct Answer
B. The truck driver cannot see you
Explanation
Driving in a truck blind spot means that the truck driver cannot see you. This is because trucks have large blind spots, especially on the sides and rear of the vehicle. It is important to avoid driving in these blind spots as it increases the risk of accidents, as the truck driver may not be aware of your presence and could unintentionally change lanes or make a maneuver that could lead to a collision.
24.
Who should wear seat belts in a moving 4-wheeler vehicle?
Correct Answer
C. All the occupants in the vehicle
Explanation
All the occupants in the vehicle should wear seat belts in a moving 4-wheeler vehicle. This is because seat belts are designed to protect passengers in the event of a collision or sudden stop. Wearing seat belts can prevent occupants from being thrown forward or ejected from the vehicle, reducing the risk of serious injury or death. Therefore, it is important for everyone in the vehicle to wear seat belts to ensure their safety.