Nc Practice Drivers License Test

The correct answer is 35. In towns and cities, the usual speed limit is 35 mph.

The correct answer states that you can turn right on red after stopping and ensuring that it is safe to do so. This means that if there is no sign prohibiting a right turn on red, you are allowed to make the turn as long as you come to a complete stop and check for any oncoming traffic or pedestrians that may pose a danger. It is important to prioritize safety and only proceed with the turn if it can be done without causing any harm.

When approaching a road that is blocked from view, it is important to stop and proceed with caution. This is because the road may be obstructed by an obstacle, such as a parked vehicle or construction work, making it unsafe to continue without assessing the situation. By stopping and proceeding with caution, the driver can ensure their safety and the safety of others on the road by taking necessary precautions before proceeding.

When taking a long trip, it is important to stop and rest. This is because driving for long periods without breaks can lead to fatigue, which can impair concentration and reaction time. Stopping and resting allows the driver to refresh and recharge, reducing the risk of accidents caused by drowsiness. It is crucial to prioritize safety over reaching the destination quickly.

A blood alcohol concentration (BAC) of 0.08 percent is the legal limit in many jurisdictions for determining if a person is driving under the influence of alcohol. If a person's BAC is at least 0.08 percent, it indicates that they have consumed a significant amount of alcohol and are impaired to the point where their driving ability is compromised. As a result, their license would be revoked immediately to ensure the safety of themselves and others on the road.

When travelling behind a farm vehicle on a two-lane road, it is important to wait until the farm vehicle pulls to the side and then pass it cautiously. This is the correct answer because farm vehicles often move at slower speeds and may make frequent stops or turns. Waiting for the farm vehicle to pull to the side ensures that there is enough space and visibility to safely pass it. Passing quickly without caution can be dangerous and increases the risk of accidents. Keeping behind the farm vehicle for an extended period may cause frustration to other drivers and hinder the flow of traffic.

Large trucks (tractor trailers) have large blind spots to the rear and to the side. This means that the driver's visibility is significantly reduced in these areas, making it difficult for them to see other vehicles. As a result, accidents can occur when smaller vehicles are in these blind spots and the truck driver is unaware of their presence. It is important for drivers of smaller vehicles to be cautious and avoid lingering in these blind spots to prevent accidents.

If you experience a breakdown, pulling over to the side of the road and raising your hood is the correct course of action. This helps to signal to other drivers that your vehicle is not functioning properly and alerts them to proceed with caution. Additionally, raising the hood can provide a visual cue to passing motorists that you may require assistance. Calling 911 may be necessary in certain situations, such as if you are in immediate danger or blocking traffic, but it is not always the first step. Buying a new car immediately is not a practical solution when faced with a breakdown.

Wearing something white is the correct answer because it increases visibility at night. Dark clothing can make it difficult for drivers to see pedestrians, increasing the risk of accidents. Wearing something white reflects light, making it easier for drivers to spot pedestrians and avoid collisions. Bringing someone along may provide some level of safety, but it does not directly address the issue of visibility.

When taking any medication before driving, it is important to find out what effect the medicine has. This is crucial because certain medications can cause drowsiness, dizziness, or other side effects that can impair your ability to drive safely. By understanding the potential effects of the medication, you can make an informed decision about whether it is safe for you to drive or if you need to adjust your dosage or find an alternative means of transportation.

Secondary roads are typically located in hilly or mountainous areas, where the terrain is more uneven compared to primary roads. As a result, these roads are more likely to have steep hills, which can be challenging for drivers to navigate. Additionally, secondary roads often have sharper curves, as they may follow the natural contours of the land more closely. These sharp turns require drivers to slow down and maneuver carefully to maintain control of their vehicles. Therefore, the statement that hills are more likely to be steep and curves are likely to be more sharp on secondary roads is a reasonable explanation.

Trucks have blind spots that can make cars disappear from their view. Blind spots are areas around the truck where the driver's vision is obstructed, and they cannot see other vehicles. These blind spots are typically located on the sides of the truck, near the rearview mirrors and behind the truck. When a car is in a truck's blind spot, the truck driver may not be aware of its presence, increasing the risk of accidents or collisions if the truck changes lanes or makes a turn.

Gently applying the brakes is the correct answer because it allows the brake pads to make contact with the wet rotors and gradually remove the water from their surface. Applying the brakes too forcefully can cause the water to create a barrier between the pads and rotors, reducing braking performance. Driving fast to let air hit the brakes may help to some extent, but it is not a reliable method for drying wet brakes.

When taking a long trip, it is recommended to stop and rest every 100 miles. This is because driving for long periods without breaks can lead to fatigue, which can impair concentration and reaction time, increasing the risk of accidents. By stopping and resting every 100 miles, drivers can stretch their legs, use the restroom, and take a break from the monotony of driving, helping them stay alert and refreshed throughout the journey.

To have a revoked license restored, you need to visit the driver's license office and pay a restoration fee. Additionally, you must reapply for another license. This process involves fulfilling the necessary requirements and providing any required documentation. By visiting the driver's license office, paying the fee, and reapplying for a license, you can have your revoked license restored.

When approaching a railroad crossing, it is important to be prepared to slow down and stop. This is because railroad crossings can be dangerous and it is necessary to exercise caution. Trains may be passing through, so it is crucial to be attentive and ready to slow down or stop if needed. This ensures the safety of both the driver and any pedestrians or vehicles crossing the railroad tracks. Going slowly over the speed bump or simply looking out for trains may not be sufficient actions to take when approaching a railroad crossing.

When preparing to make a right hand turn, it is important to turn on your signal light to indicate your intention to other drivers. This allows them to anticipate your move and adjust their driving accordingly. Additionally, approaching the right hand side of the road ensures that you are in the correct position to make the turn safely. By doing so, you can avoid any potential collisions with oncoming traffic and ensure a smooth and efficient turn.

A shoulder check is a quick glance over your shoulder on the side in which you intend to turn or change lanes. This is done to check for any vehicles or obstacles in your blind spot before making the maneuver. It is an important safety practice to ensure that there are no vehicles in your intended path and to prevent accidents or collisions.

When driving down a very steep hill, shifting into a lower gear helps to control your speed. This is because lower gears provide more engine braking, which slows down the vehicle without relying solely on the brakes. By shifting into a lower gear, you can prevent the vehicle from gaining excessive speed and maintain better control over the vehicle's momentum.

When driving into a circle, it is important to yield to vehicles already in the circle. This means that you should give the right of way to vehicles that are already in the circular roadway. By yielding, you allow these vehicles to continue their movement without interruption. This helps to maintain the flow of traffic and prevent accidents. Watching for pedestrians and being aware of other cars are also important, but yielding to vehicles in the circle is the most crucial action to take when entering a roundabout.

When driving through heavy snow or fog, it is important to use low-beam lights. This is because low-beam lights provide better visibility in adverse weather conditions. They allow you to see the road ahead more clearly without reflecting off the snow or fog, reducing glare and improving your ability to see other vehicles and obstacles. Bright lights, on the other hand, can create a blinding effect in such conditions, making it difficult for both you and other drivers to see properly. Window wipers are not relevant to this situation and do not improve visibility in heavy snow or fog.

School buses are required to stop at all railroad crossings because it is a safety measure to ensure the protection of the students on board. Stopping allows the bus driver to assess the situation, look out for any approaching trains, and ensure that it is safe to proceed. This precautionary measure reduces the risk of accidents and potential collisions between the school bus and a train. Therefore, it is essential for school buses to come to a complete stop at all railroad crossings.

In densely packed snow, the road conditions can be extremely slippery and hazardous. Driving slowly alone may not provide enough traction to maintain control of the vehicle. Therefore, using chains or snow tires can greatly improve traction and grip on the snowy surface, reducing the risk of accidents and ensuring a safer driving experience.

Alcohol related highway deaths account for 38% of traffic fatalities. This means that nearly four out of every ten traffic fatalities are caused by alcohol. This high percentage highlights the significant impact that alcohol has on road safety and emphasizes the need for stricter regulations and enforcement to prevent drunk driving incidents.

If a person accumulates 7 or more points on their traffic record, they have the option to attend a driver improvement clinic to deduct 3 points from their driver record. This means that by attending the clinic, they can reduce the number of points on their record, which can help them avoid losing their license or having it suspended.

Passing a stopped school bus that is loading or unloading children is considered a serious traffic violation, as it puts the safety of children at risk. This violation typically results in the highest number of points (5) being added to a driver's record. Running a stop light and causing an accident are also serious offenses, but they may not always carry the same number of points as passing a stopped school bus.

In a situation where 3 vehicles reach a 4-way stop at the same time, the right of way belongs to the car on the right. This is because, in most countries, the general rule is that when multiple vehicles arrive at a 4-way stop simultaneously, the vehicle on the right has the right of way. This rule helps to establish a clear and organized flow of traffic, preventing confusion and potential accidents. Therefore, the car on the right should proceed first, followed by the other vehicles in a clockwise manner.

Before passing a vehicle, it is important to look ahead to ensure there is enough room to pass. This is because passing a vehicle requires sufficient space to safely maneuver around the other car without causing any accidents or endangering other road users. By checking ahead, you can assess the distance, speed, and any potential obstacles that may affect your passing maneuver. This will help you make an informed decision and ensure a smooth and safe passing maneuver.

A rear-end collision is the most common type of accident on a highway because it occurs when a vehicle crashes into the back of another vehicle. This can happen due to various reasons such as following too closely, distracted driving, sudden braking, or not paying attention to the road ahead. Rear-end collisions are more likely to occur on highways where vehicles are traveling at high speeds and there is less time to react to sudden changes in traffic conditions. Additionally, heavy traffic or congested areas can increase the chances of rear-end collisions due to the close proximity of vehicles.

"Don't hang out in the no zone" is a phrase commonly used to warn drivers about staying out of a trucker's blind spot. The "no zone" refers to the areas around a large truck where the driver has limited or no visibility. These blind spots are located on the sides, rear, and front of the truck. Being in a trucker's blind spot can be dangerous as the driver may not be able to see you, increasing the risk of accidents. Therefore, the correct answer is being in a trucker's blind spot.

If a vehicle sways freely, leans heavily to one side during a turn, or seems to bounce continuously, it indicates a problem with the suspension system. The suspension system is responsible for maintaining the stability and smoothness of the vehicle's ride. If there is an issue with the suspension, it can cause the vehicle to lose control, resulting in swaying, leaning, or bouncing. Therefore, the suspension system is the likely culprit in this scenario.

If you plan to turn and are not in the proper lane to do so, the correct course of action is to continue to the next intersection and then make the turn. This ensures that you are following the proper traffic flow and not disrupting the flow of other vehicles. Simply signaling and turning right away may lead to confusion and potentially cause accidents. Proceeding without making the proper turn would also be incorrect and may violate traffic laws.

High beams should be used when driving on a highway and no car is approaching because high beams provide better visibility in dark or poorly lit areas. However, it is important to switch to low beams when there is an oncoming vehicle or when following another car to avoid blinding the other driver. Using high beams in these situations can cause accidents or be a distraction to other drivers.

When planning a long trip, it is important to take regular breaks to avoid fatigue and ensure safety. Stopping and resting every 100 miles allows the driver to stretch their legs, refresh their mind, and stay alert throughout the journey. This frequent break pattern helps prevent drowsiness and reduces the risk of accidents caused by driver fatigue. By adhering to this practice, drivers can maintain their focus and make the trip more enjoyable and safe.

In the event of a crash, it is important to move your car to the side of the road. This is done to ensure the safety of yourself and other drivers on the road. By moving your car out of the way, you can prevent further accidents or traffic congestion. It also allows emergency services to access the scene if needed. Calling the police is also recommended, as they can provide assistance and document the incident. However, getting out of the car to see the damages should be avoided as it can put you at risk of being hit by other vehicles or further injury.

Slippery roads seem to occur when it just began to drizzle. This is because when it starts to drizzle, the water mixes with the oil and dirt on the road surface, creating a thin and slippery layer. This can reduce the friction between the tires and the road, making it more difficult for vehicles to maintain traction and increasing the risk of accidents.

When running off the side of the road, gradually taking your foot off the gas pedal is the correct response. Slamming on the brakes could cause the vehicle to skid or lose control, potentially leading to an accident. By gradually reducing the pressure on the gas pedal, you can safely slow down and regain control of the vehicle before attempting to get back onto the road.

When travelling on rural highways, farm equipment usually travels at its maximum speed of 15-20 mph. This is because farm equipment is generally designed for slower speeds and may not be able to travel at higher speeds safely. Driving slowly behind farm equipment is important to ensure safe and cautious driving, as attempting to pass them can be dangerous due to their slow speed and large size.

The law requires a one-year suspension of the underage person's driver's license if they aid or abet another in attempting to purchase any alcoholic beverage. This is a consequence imposed to discourage underage individuals from participating in activities related to the purchase or consumption of alcohol. By suspending their driver's license, it aims to limit their mobility and potentially deter them from engaging in such behavior in the future.

Defensive drivers should check their rear-view mirrors every 10 seconds. This is because regularly checking the rear-view mirrors allows drivers to be aware of their surroundings and any potential hazards or vehicles approaching from behind. By checking every 10 seconds, drivers can maintain situational awareness and make informed decisions while driving, ensuring their safety and the safety of others on the road.

The two second rule is the correct answer because it is a widely recognized guideline for maintaining a safe driving distance. It suggests that you should keep a minimum of a two second time gap between your car and the car in front of you. This allows you enough time to react and stop your vehicle safely in case of any sudden changes or emergencies on the road. It is an important rule to follow to prevent accidents and ensure overall road safety.

When driving at a speed of 45 mph, it is recommended to signal at least 200 feet before making a turn. This allows other drivers to be aware of your intentions and gives them enough time to react and adjust their speed accordingly. Signaling early and clearly is crucial for maintaining road safety and preventing accidents.

The correct answer is that the turning lane is the only lane that should stop. This means that if you are in the turning lane and you pull up to a red arrow, you should come to a complete stop before proceeding. The other lanes, however, do not need to stop and can proceed with caution if it is safe to do so.

When driving behind someone, it is important to use your low beams instead of high beams. High beams can blind the driver in front of you, making it difficult for them to see the road ahead. This can be dangerous and increase the risk of accidents. Therefore, it is necessary to use low beams to ensure clear visibility for both drivers and maintain safety on the road.

In city traffic, it is important to be alert for drivers who make quick stops. This is because in congested areas, drivers may need to stop suddenly due to various reasons such as traffic congestion, pedestrians crossing the road, or unexpected obstacles. Being alert for such drivers helps to anticipate their actions and allows for quicker reaction time, reducing the risk of accidents and ensuring overall safety on the road.