FSG Reg Quiz (Sanshray 2)
The one that hit us hard!
- 1.
How many early registration slots are available in total for combustion teams at FS Germany 2014?
- A.
15
- B.
10
- C.
35
- D.
25
Correct Answer
C. 35Explanation
There are a total of 35 early registration slots available for combustion teams at FS Germany 2014.Rate this question:
-
- 2.
Which Fuel Types are expected to be available at the FSG Competition 2014?
- A.
E85 and 98 Octane Gasoline
- B.
M85 and 98 Octane Gasoline
- C.
M85 and 98 Octane and 100 Octane Race Gasoline
- D.
E85 and 98 Octane Gasoline and 100 Octance Race Gasoline
Correct Answer
A. E85 and 98 Octane GasolineExplanation
The expected fuel types at the FSG Competition 2014 are E85 and 98 Octane Gasoline.Rate this question:
-
- 3.
How many tubes are needed at least to create a side impact structure for a Tubular Space Frame?
- A.
2
- B.
3
- C.
5
- D.
4
Correct Answer
B. 3Explanation
To create a side impact structure for a Tubular Space Frame, at least 3 tubes are needed. This is because a side impact structure requires multiple tubes to provide sufficient strength and rigidity to protect the occupants of the vehicle in the event of a side collision. With only 2 tubes, the structure may not be able to effectively absorb and distribute the impact forces, potentially compromising the safety of the vehicle. Therefore, a minimum of 3 tubes is necessary for a side impact structure in a Tubular Space Frame.Rate this question:
-
- 4.
Which dimensions does the engine displacement inspection tool have, when installed to and coaxially with spark plug hole?
- A.
381 mm (15 inches) long and 30 mm (1.2 inches) diameter
- B.
381 mm (15 inches) diameter and 30 mm (1.2 inches) long
- C.
356 mm (14 inches) long and 28 mm (1.1 inches) diameter
- D.
356 mm (14 inches) diameter and 28 mm (1.1 inches) long
Correct Answer
A. 381 mm (15 inches) long and 30 mm (1.2 inches) diameterExplanation
The engine displacement inspection tool is 381 mm (15 inches) long and has a diameter of 30 mm (1.2 inches) when installed to and coaxially with the spark plug hole.Rate this question:
-
- 5.
Which Cost Report documents and information must be handed in till 6th of June 2014?
- A.
Cost tables, supporting material, cost summary and written copy of the full report
- B.
Cost tables, supporting material and written copy of the full report
- C.
Cost tables, cost summary and written copy of the full report
- D.
Cost tables, supporting material and cost summary
Correct Answer
D. Cost tables, supporting material and cost summaryExplanation
The correct answer is "Cost tables, supporting material and cost summary." This is because the question asks for the specific documents and information that must be handed in by a certain date, which is the 6th of June 2014. The options that include the written copy of the full report are incorrect because the question does not specify that the full report needs to be included. Therefore, the correct answer is the option that includes only the cost tables, supporting material, and cost summary.Rate this question:
-
- 6.
What is the minimum possible height of a head restraint with a width of 150mm?
- A.
156.6 mm
- B.
15.82 cm
- C.
200 mm
- D.
28 cm
Correct Answer
A. 156.6 mmExplanation
The minimum possible height of a head restraint with a width of 150mm is 156.6mm. This is because the head restraint needs to be slightly taller than its width in order to provide adequate support and protection for the head. A height of 156.6mm ensures that the head restraint is proportional and effective in preventing whiplash injuries.Rate this question:
-
- 7.
How much more area does a maximum size gasoline restrictor provide to the airflow compared to a maximum size E85 restrictor?
- A.
30.631mm²
- B.
30.361mm²
- C.
122.522mm²
- D.
122.252mm²
Correct Answer
A. 30.631mm²Explanation
A maximum size gasoline restrictor provides 30.631mm² more area to the airflow compared to a maximum size E85 restrictor.Rate this question:
-
- 8.
What is the minimum stroke width of the letters/digits showing the car number?
- A.
20 mm
- B.
25.4 mm
- C.
18 mm
- D.
15 mm
Correct Answer
C. 18 mmExplanation
The minimum stroke width of the letters/digits showing the car number is 18 mm.Rate this question:
-
- 9.
What is the minimum fuel pressure of a fuel system which is classified as high pressure injection system by the rules?
- A.
10 Bar (145 psi)
- B.
2100 kPa (300 psi)
- C.
9 Bar (130 psi)
- D.
800kPa (116 psi)
Correct Answer
A. 10 Bar (145 psi)Explanation
The minimum fuel pressure of a fuel system classified as a high-pressure injection system is 10 Bar (145 psi). This means that the fuel system is designed to operate at a pressure of at least 10 Bar or 145 psi to ensure proper fuel delivery and atomization for efficient combustion in the engine.Rate this question:
-
- 10.
Which specific equipment must be presented during technical inspection?
- A.
All tools which are necessary to work on the car
- B.
Quick jack which must lift the driven wheels by at least 10.2 cm or 4in
- C.
All tool carts which will be used in the dynamic area
- D.
Team radio equipment, to check interferences with the officials radio frequencies
Correct Answer
B. Quick jack which must lift the driven wheels by at least 10.2 cm or 4inExplanation
During the technical inspection, it is necessary to present a quick jack that can lift the driven wheels of the car by at least 10.2 cm or 4 inches. This equipment is important as it allows the inspectors to check the condition of the wheels and suspension system, ensuring that they meet the required standards for the competition. The other options mentioned, such as all tools necessary to work on the car, tool carts, and team radio equipment, are not specifically mentioned as requirements for the technical inspection.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 12, 2014Quiz Created by
Prvmarketing2014
Back to top