Review # 3: Grinders, Sanders And Miscellaneous Power Tools
This is your description.
Questions and Answers
- 1.
This tool is used to smooth the inside of materials, such as a pipe.
- A.
End grinder
- B.
Angle grinder
- C.
Bench grinder
- D.
Answer option 4
Correct Answer
A. End grinderExplanation
An end grinder is a tool used to smooth the inside of materials, such as a pipe. It is specifically designed to reach the inner surfaces of pipes and other cylindrical objects, allowing for precise and efficient smoothing. Unlike angle grinders or bench grinders, which are more commonly used for external surfaces, an end grinder is specifically tailored for internal smoothing tasks.Rate this question:
-
- 2.
This tool is used to grind away hard, heavy materials.
- A.
Angle grinder
- B.
End grinder
- C.
Bench grinder
- D.
Answer option 4
Correct Answer
A. Angle grinderExplanation
An angle grinder is a tool that is commonly used to grind away hard and heavy materials. It is designed with a rotating abrasive disc that can remove material quickly and efficiently. The angle grinder is versatile and can be used for various tasks such as cutting, grinding, and polishing. It is a popular choice among professionals and DIY enthusiasts for its power and effectiveness in grinding away tough materials.Rate this question:
-
- 3.
This tool is a stationary grinder.
- A.
End grinder
- B.
Bench grinder
- C.
Angle grinder
- D.
Answer option 4
Correct Answer
B. Bench grinderExplanation
A bench grinder is a type of stationary grinder that is mounted on a workbench or table. It is used for sharpening, grinding, and shaping metal or other materials. Unlike an angle grinder, which is handheld and portable, a bench grinder provides stability and precision for more controlled grinding tasks. Therefore, the correct answer is "bench grinder."Rate this question:
-
- 4.
What should be the distance between the tool rest and the wheel on a bench grinder?
- A.
1/8 inch
- B.
1/2 inch
- C.
1/4 inch
- D.
Answer option 4
Correct Answer
A. 1/8 inchExplanation
The distance between the tool rest and the wheel on a bench grinder should be 1/8 inch. This is because having a small gap between the tool rest and the wheel allows for better control and precision when using the grinder. It also helps to prevent the tool from getting caught or jammed between the rest and the wheel, reducing the risk of accidents or damage to the tool.Rate this question:
-
- 5.
What should you do FIRST before operating a pneumatically powered nail gun for the FIRST time?
- A.
Read the manufacturer's instructions
- B.
Inspect the nail gun for damage
- C.
Load nails
- D.
Answer option 4
Correct Answer
A. Read the manufacturer's instructionsExplanation
Before operating a pneumatically powered nail gun for the first time, it is important to read the manufacturer's instructions. This is crucial as it provides essential information about the proper operation, safety precautions, and maintenance of the nail gun. By reading the instructions, the user can ensure they are using the tool correctly and safely, reducing the risk of accidents or damage. Inspecting the nail gun for damage and loading nails are important steps, but they should be done after familiarizing oneself with the manufacturer's instructions.Rate this question:
-
- 6.
Before attempting repairs on a pneumatic nailer that is not firing, you should do what?
- A.
Adjust the pressure
- B.
Disconnect the air hose
- C.
Adjust the compressor
- D.
Answer option 4
Correct Answer
B. Disconnect the air hoseExplanation
Before attempting repairs on a pneumatic nailer that is not firing, it is important to disconnect the air hose. This is necessary to ensure the safety of the person working on the nailer. By disconnecting the air hose, the flow of compressed air to the nailer is stopped, reducing the risk of accidental firing or injury. Once the air hose is disconnected, it is then safe to proceed with the repairs or troubleshooting of the pneumatic nailer.Rate this question:
-
- 7.
What should be added to the air inlet of a pneumatic nail gun after every use?
- A.
Oil
- B.
Water
- C.
Dust
- D.
Answer option 4
Correct Answer
A. OilExplanation
Oil should be added to the air inlet of a pneumatic nail gun after every use. This is because the air inlet requires lubrication to ensure smooth operation and prevent damage to the internal components. Oil acts as a lubricant, reducing friction and extending the lifespan of the nail gun. Without regular oiling, the nail gun may experience increased wear and tear, leading to malfunctions and decreased performance. Therefore, adding oil to the air inlet is necessary maintenance for the proper functioning of a pneumatic nail gun.Rate this question:
-
- 8.
A Porta-Power is what type of power tool?
- A.
Electric tool
- B.
Pneumatic tool
- C.
Hydraulic tool
- D.
Answer option 4
Correct Answer
C. Hydraulic toolExplanation
A Porta-Power is a type of power tool that operates using hydraulic power. Hydraulic tools use fluid power to generate force and perform tasks such as lifting heavy objects or applying pressure. They are commonly used in automotive repair, construction, and other industries where high force is required.Rate this question:
-
- 9.
What should be balanced when using an air impact wrench?
- A.
Your body stance
- B.
Your air supply
- C.
Your PPE
- D.
Answer option 4
Correct Answer
A. Your body stanceExplanation
When using an air impact wrench, it is important to balance your body stance. This means maintaining a stable and balanced position while operating the tool. A proper body stance helps to effectively control the wrench, minimize the risk of injury, and maximize the efficiency of the task at hand. By distributing your weight evenly and positioning yourself in a stable manner, you can ensure better control and accuracy while using the air impact wrench.Rate this question:
-
- 10.
What is another name for a pavement breaker?
- A.
Jackhammer
- B.
Pickaxe
- C.
Hammer
- D.
Answer option 4
Correct Answer
A. JackhammerExplanation
A pavement breaker is commonly known as a jackhammer. It is a powerful tool used to break up concrete, asphalt, and other hard surfaces. The term "jackhammer" is often used interchangeably with "pavement breaker" in construction and demolition industries. It operates by delivering a high-impact force through a hammer-like mechanism, making it an effective tool for breaking and demolishing surfaces.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Aug 13, 2013Quiz Created by
Phillipssg
Back to top