L1 Certificate In The Principles Of Window And Door Installation (Qcf) Unit 2
Mandatory Unit: F/505/3140
Knowledge of the movement and storage of window and door installation materials on a work site
Questions and Answers
- 1.
Check SIX of the items listed below other than glass, associated with the installation of windows and doors?
- A.
Handles
- B.
Storage boxes
- C.
Gaskets
- D.
Delivery Van
- E.
Mitred Beading
- F.
Expanding Foam
- G.
Brickwork
- H.
Sealants
- I.
Glazing Packers
Correct Answer(s)
A. Handles
C. Gaskets
E. Mitred Beading
F. Expanding Foam
H. Sealants
I. Glazing PackersExplanation
The six items listed are all commonly associated with the installation of windows and doors. Handles are used to open and close windows and doors. Gaskets are used to provide a seal between the window or door frame and the glass. Mitred beading is used to hold the glass in place within the frame. Expanding foam is used to fill gaps and provide insulation. Sealants are used to create a waterproof and airtight seal around the window or door frame. Glazing packers are used to adjust the position of the glass within the frame.Rate this question:
-
- 2.
Glass is easier to handle WITHOUT gloves?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement "Glass is easier to handle WITHOUT gloves" is false. Gloves provide a protective barrier between the hands and the glass, reducing the risk of cuts and injuries. Glass can be slippery and fragile, so wearing gloves can improve grip and provide a layer of insulation against heat or cold. Additionally, gloves can prevent fingerprints and smudges on the glass surface, making it easier to handle and maintain. Therefore, wearing gloves while handling glass is generally recommended for safety and ease of handling.Rate this question:
-
- 3.
Glass is best stored by laying it flat on the floor in the middle of the room?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Storing glass by laying it flat on the floor in the middle of the room is not the best practice. It is important to store glass in a safe and secure manner to prevent breakage. Laying it flat on the floor increases the risk of accidentally stepping on it or causing damage. Instead, glass should be stored upright or in a vertical position, ideally in a designated storage area or rack specifically designed for glass storage. This ensures stability and minimizes the chances of breakage.Rate this question:
-
- 4.
Where would you be most likely to get information on how to store the products and materials safely?
- A.
From the Customer
- B.
From the Packaging
- C.
From the Internet
- D.
From the Delivery driver
Correct Answer
B. From the PackagingExplanation
The most likely place to get information on how to store products and materials safely would be from the packaging itself. Many products come with instructions or labels that provide guidance on proper storage methods to ensure safety and maintain product quality. These instructions may include information on temperature requirements, handling precautions, and storage duration. Therefore, checking the packaging for any relevant information would be the best source for obtaining instructions on safe storage practices.Rate this question:
-
- 5.
If you need assistance in handling or moving materials, who would decide this?
- A.
You would
- B.
Your Supervisor
- C.
Your Health & Safety Officer
- D.
Your work colleagues
Correct Answer
A. You wouldExplanation
You would be the one to decide if you need assistance in handling or moving materials. As an individual, you are responsible for assessing your own capabilities and determining whether you require help in carrying out tasks safely. It is important to prioritize your own well-being and not hesitate to ask for assistance when necessary.Rate this question:
-
- 6.
Select FOUR items of PPE that could be used when moving Materials and products
- A.
Trolley
- B.
Safety Glasses
- C.
Gauntlets / Gloves
- D.
Scaffolding
- E.
High Visibility Jacket
- F.
Hoist
- G.
Steel-toed Boots
Correct Answer(s)
B. Safety Glasses
C. Gauntlets / Gloves
E. High Visibility Jacket
G. Steel-toed BootsExplanation
When moving materials and products, it is important to ensure personal safety and protect against potential hazards. Safety glasses are necessary to protect the eyes from flying debris or particles. Gauntlets or gloves are essential to protect the hands from cuts, abrasions, or chemical exposure. A high visibility jacket is important to increase visibility and avoid accidents in busy or hazardous areas. Steel-toed boots provide protection for the feet against heavy objects or potential crushing injuries. These four items of PPE are specifically chosen for their relevance and effectiveness in ensuring safety during the movement of materials and products.Rate this question:
-
- 7.
When would you check the products and materials?
- A.
Either immediately when collected , or immediately upon delivery
- B.
As they are unpacked and used on site
- C.
They shouldn't need checking as the factory operate a quality control system
- D.
When the job is complete
Correct Answer
A. Either immediately when collected , or immediately upon deliveryExplanation
The correct answer is either immediately when collected, or immediately upon delivery. This is because checking the products and materials as soon as they are collected or delivered ensures that any damages or discrepancies can be identified and addressed promptly. This helps to avoid any delays or issues during the project and ensures that the materials meet the required quality standards.Rate this question:
-
- 8.
Identify FOUR pieces of equipment, other than PPE, that can be used to handle and move materials or product?
- A.
Trolley
- B.
Wheelbarrow
- C.
Hoist
- D.
Glass Suckers
- E.
Sling
- F.
Motorbike
Correct Answer(s)
A. Trolley
C. Hoist
D. Glass Suckers
E. SlingExplanation
The given answer correctly identifies four pieces of equipment that can be used to handle and move materials or products. A trolley is a wheeled cart that can be used to transport items. A hoist is a device used to lift heavy objects. Glass suckers are tools specifically designed to handle glass materials. A sling is a flexible strap or belt used for lifting and moving objects. These equipment options provide a range of options for safely and efficiently handling and moving materials or products.Rate this question:
-
- 9.
How would you safely dispose of unwanted materials and products ?
- A.
Burn them
- B.
Place them carefully in the household waste
- C.
In correctly marked disposal units
- D.
Ask the customer to dispose of them for you
Correct Answer
C. In correctly marked disposal unitsExplanation
The correct answer suggests that the safe disposal of unwanted materials and products should be done by placing them in correctly marked disposal units. This means that there are specific containers or bins designed for different types of waste, such as recyclables, hazardous materials, or general household waste. By using these properly labeled disposal units, it ensures that the waste is handled and disposed of in a way that minimizes harm to the environment and public health.Rate this question:
-
- 10.
Which of the following items of waste can be recycled: Glass. Cardboard, Sealant Tubes, Polystyrene and PVC-u
- A.
Glass
- B.
All of them
- C.
Glass, Cardboard. PVC-u
- D.
None of them
Correct Answer
C. Glass, Cardboard. PVC-uExplanation
Glass, cardboard, and PVC-u can be recycled. Glass can be melted down and reused to make new glass products. Cardboard can be broken down and turned into new paper products. PVC-u, also known as unplasticized polyvinyl chloride, can be recycled and used to make new PVC products. However, sealant tubes and polystyrene cannot be easily recycled and are typically considered non-recyclable waste.Rate this question:
-
- 11.
Non-recycleable products from the installation should be carefully placed in the customers waste bin
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Non-recyclable products from the installation should not be placed in the customers waste bin. This is because non-recyclable products cannot be processed and reused in the same way as recyclable materials. Instead, they should be disposed of properly in accordance with local waste management guidelines.Rate this question:
-
- 12.
How should recyclable waste from the installation should be disposed ?
- A.
In the customer's waste bin
- B.
By the side of the road
- C.
Burn it
- D.
In clearly marked containers
Correct Answer
D. In clearly marked containersExplanation
Recyclable waste from the installation should be disposed in clearly marked containers. This ensures that the waste is properly sorted and can be easily identified as recyclable by waste management personnel. Placing it in the customer's waste bin may lead to confusion and improper disposal. Leaving it by the side of the road is not a responsible or legal method of waste disposal. Burning recyclable waste is also not recommended as it can release harmful pollutants into the environment. Therefore, using clearly marked containers is the most appropriate and environmentally friendly way to dispose of recyclable waste.Rate this question:
-
- 13.
What is MANUAL HANDLING?
- A.
Handling a Man
- B.
Handling Manuals
- C.
Push, Pulling, Lifting and Carrying
Correct Answer
C. Push, Pulling, Lifting and CarryingExplanation
Manual handling refers to the physical activity of pushing, pulling, lifting, and carrying objects. It involves using one's own body strength to move items, without the assistance of machinery or equipment. This can include tasks such as lifting boxes, pushing heavy trolleys, or carrying bags. It is important to understand the correct techniques for manual handling in order to prevent injuries and strains to the body.Rate this question:
-
- 14.
Ideally, where should a load be carried?
- A.
Waist Level
- B.
Shoulder Level
- C.
Feet Level
- D.
Eye Level
Correct Answer
A. Waist LevelExplanation
A load should ideally be carried at waist level. Carrying a load at waist level allows for better balance and stability, as the center of gravity is closer to the body's base of support. This reduces the risk of strain or injury to the back and other muscles. Carrying a load at shoulder level can cause the body to become unbalanced and increase the risk of dropping the load. Carrying a load at feet level can be difficult and awkward, as it requires bending down and putting strain on the back. Carrying a load at eye level can obstruct the field of vision and make it difficult to see obstacles or hazards.Rate this question:
-
- 15.
How should you pick up an installation item safely?
- A.
Bend over an pick it up quickly
- B.
Bend over and pick it up slowly7
- C.
Get close, bend down, and pick it up, keeping your back straight
Correct Answer
A. Bend over an pick it up quickly -
- 16.
When carrying an installation item, how quickly should you move?
- A.
Walking pace
- B.
As quickly as possible
- C.
As slowly as possible
Correct Answer
A. Walking paceExplanation
When carrying an installation item, it is recommended to move at a walking pace. This means moving at a moderate speed that allows for stability and control over the item being carried. Moving too quickly can increase the risk of accidents or dropping the item, while moving too slowly may cause delays and inefficiency. Walking pace strikes a balance between maintaining a reasonable speed and ensuring the safety of both the person carrying the item and the item itself.Rate this question:
-
- 17.
What should you do before carrying a load through a narrow walkway
- A.
Check the route is clear of obstacles
- B.
Have someone shout directions
- C.
Have a drink
- D.
Make sure you are wearing gloves
Correct Answer
A. Check the route is clear of obstaclesExplanation
Before carrying a load through a narrow walkway, it is important to check the route is clear of obstacles. This is necessary to ensure a safe passage and prevent any accidents or damage to the load and surroundings. By checking the route beforehand, one can identify any potential obstacles or hazards that may hinder the movement of the load and take necessary precautions to avoid them.Rate this question:
-
- 18.
It is safer to keep your knees straight when lifting
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Keeping your knees straight when lifting is actually unsafe. When lifting heavy objects, it is recommended to bend your knees and use the muscles in your legs to lift the weight. Keeping your knees straight puts excessive strain on your back and increases the risk of injury. By bending your knees, you engage your leg muscles and distribute the weight more evenly, reducing the strain on your back.Rate this question:
-
- 19.
Manual handling can be avoided completely?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Manual handling cannot be completely avoided as there are certain tasks that require physical effort and cannot be automated. While efforts can be made to minimize manual handling by using tools, equipment, and technology, there will always be situations where manual handling is necessary. Therefore, the correct answer is False.Rate this question:
-
- 20.
Which part of the body is most at risk from manual handling injuries
- A.
The Eyes
- B.
The Ears
- C.
The Feet
- D.
The Back
Correct Answer
D. The BackExplanation
The back is most at risk from manual handling injuries because it is responsible for supporting the weight of the body and is involved in most physical movements. Lifting, carrying, pushing, and pulling heavy objects can put strain on the back muscles and spine, leading to injuries such as sprains, strains, and herniated discs. It is important to use proper lifting techniques and equipment to minimize the risk of back injuries during manual handling tasks.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Jun 17, 2014Quiz Created by
Julianmci
- Binary Code Quizzes
- Computer Concept Quizzes
- Computer Essential Quizzes
- Computer Forensics Quizzes
- Computer Hardware Quizzes
- Computer Networking Quizzes
- Computer Parts Quizzes
- Computer Programming Quizzes
- Computer Science Quizzes
- Computer Security Quizzes
- Computer Shortcut Key Quizzes
- Computer Skills Quizzes
- Computer Virus Quizzes
- Cyber Security Quizzes
- Data Quizzes
- Data Security Quizzes
- Hacking Quizzes
- HCI Quizzes
- Internet Quizzes
- IT SecurITy Quizzes
- Malware Quizzes
- Microprocessor Quizzes
- Network Quizzes
- Phishing Quizzes
- Programming Language Quizzes
- Server Quizzes
- Software Quizzes
Back to top