1.
You are mandated to design the set fro a musical production called " Outameni". Identify the most appropriate course of actions
Correct Answer
D. Read the play, discuss with the director and both conduct a site visit
Explanation
The most appropriate course of action for designing the set for the musical production "Outameni" is to first read the play. This will provide a thorough understanding of the storyline, characters, and themes. Then, it is important to discuss with the director to align their vision and expectations for the set design. Finally, conducting a site visit will allow the designer to assess the physical space and incorporate its unique features into the set design. By combining all three actions, the designer can create a set that effectively enhances the production.
2.
Where is the BEST position for placing the band for the musical production to be held at the Little Theatre?
Correct Answer
B. In the pit/ apron
Explanation
The best position for placing the band for the musical production at the Little Theatre is in the pit/apron. This is because the pit/apron is a designated area in front of the stage where musicians typically sit during performances. Placing the band in this location allows them to be close to the action and have a clear line of sight to the performers. Additionally, being in the pit/apron ensures that the band's music will be well-balanced and integrated with the rest of the production.
3.
Stage lighting can be
classified as either specific or general. Identify correctly the lighting that
is classified under general lighting?
Correct Answer
C. Even lighting
Explanation
Even lighting is classified under general lighting. General lighting refers to the overall illumination of a space, providing a uniform and balanced level of light throughout the area. It is typically used to create a comfortable and functional environment, without any specific focus or emphasis on particular objects or areas. Even lighting ensures that there are no dark spots or shadows, providing a consistent level of brightness across the entire space.
4.
Which of the following is best suited for creating the effect of
a prison cell?
Correct Answer
D. Strobe
Explanation
A strobe light is best suited for creating the effect of a prison cell because it can create a flickering, flashing effect that resembles the harsh lighting commonly found in prison cells. The rapid on-off cycle of the strobe light can create a disorienting and oppressive atmosphere, enhancing the feeling of being confined in a small space. The other options (gobo, fresnel, and baby spot) are types of lighting fixtures that may not be able to produce the same intense and unsettling effect as a strobe light.
5.
Production deals with
the art of conceptualizing and executing an event for the pleasure of an audience. Which of
the following words BEST substitutes conceptualizing in this
context?
Correct Answer
C. Designing
Explanation
In the context of production, conceptualizing refers to the process of generating ideas and plans for an event. The word that best substitutes conceptualizing in this context is "designing." Designing involves creating a visual or conceptual plan for an event, which aligns with the idea of conceptualizing in the context of production.
6.
The production team
consist of several departments, each having their specific responsibility.
Identify the department responsible for protocol issues.
Correct Answer
B. Public Relations
Explanation
Public Relations is the department responsible for protocol issues in the production team. Public Relations is typically responsible for managing the communication and relationships with external stakeholders, including government officials, VIPs, and other organizations. They ensure that proper protocols and etiquette are followed in interactions with these stakeholders, representing the production team in a professional and respectful manner. This department handles matters such as invitations, event planning, and coordinating protocol-related activities to maintain a positive image and reputation for the production team.
7.
What is the main function
of stage lights?
Correct Answer
B. Illumination
Explanation
Stage lights have the main function of providing illumination on stage. They are used to ensure that the performers and the stage are properly lit, allowing the audience to see what is happening. Illumination is crucial for the visibility of actors, their costumes, props, and the overall set design. It helps to create a clear and well-lit environment, making the performance visually appealing and ensuring that the audience can fully engage with the show.
8.
Which of the following
is NOT considered to be a spot light?
Correct Answer
C. Parcan
Explanation
A parcan is not considered to be a spot light because it is a type of floodlight that produces a wide, even beam of light rather than a focused spot. Spot lights, on the other hand, are designed to produce a concentrated beam of light that can be directed to a specific area or object. The other options listed (profile spot, strobe, and fresnel) are all types of spot lights commonly used in stage lighting.
9.
Why are the lights in a
“criss cross” position when rigging?
Correct Answer
C. Light rays travel in a straight line
Explanation
The correct answer is that light rays travel in a straight line. When rigging lights in a "criss cross" position, it allows the light rays to intersect and cover a larger area, providing more even and balanced lighting. This arrangement helps to minimize shadows and create a more visually appealing and evenly lit environment.
10.
During the production,
it was discovered that one of the main acts was absent and a decision was to be made
for a replacement with a bigger act, whose call is it?
Correct Answer
C. Artistic director and administrator
Explanation
The artistic director and administrator are responsible for making decisions regarding the production, including finding a replacement for a main act. They have the authority and expertise to determine the best course of action and ensure the smooth running of the production.
11.
Which of the following
colour gels would you use to create the sunset?
Correct Answer
C. Orange and yellow
Explanation
To create the sunset, orange and yellow color gels would be used. This combination of colors closely resembles the warm and vibrant hues typically seen during a sunset. The orange color gel adds depth and intensity to the sunset colors, while the yellow color gel enhances the brightness and highlights. Together, these colors create a realistic and visually appealing representation of a sunset.
12.
The main purpose of general lighting on stage is to:
Correct Answer
D. Colour the scene
Explanation
General lighting on stage is used to enhance the overall visual experience of the performance by adding color to the scene. It helps set the mood and atmosphere of the production, creating a specific ambiance that complements the storyline or theme. By using different colored lights, the lighting designer can evoke different emotions and create a visually appealing aesthetic that enhances the audience's engagement with the performance. Therefore, the correct answer is "color the scene."
13.
The production manager in an executive meeting stated that he was hoping
for a large house. What does the statement large house refer to?
Correct Answer
C. The issue is the number of audience at the show
Explanation
The correct answer is "the issue is the number of audience at the show". The statement "he was hoping for a large house" refers to the production manager's desire for a high attendance or a large number of audience at the show. It does not refer to accommodations, dreams of a big house, or the actor's life goals.
14.
The floor plan is done:
Correct Answer
B. As seen from a bird's eye view
Explanation
The correct answer is "as seen from a bird's eye view". This means that the floor plan is depicted from a perspective that is directly above the objects, as if looking down from the sky. This view allows for a comprehensive understanding of the layout and arrangement of objects on the stage, including all sides and dimensions.
15.
The house lights are located:
Correct Answer
C. In front of the stage
Explanation
The house lights are located in front of the stage. This is because the house lights are typically positioned in the audience area of the theater or auditorium, facing towards the stage. Placing the lights in front of the stage allows for better visibility and illumination of the performance area, ensuring that the audience can see the actors and the set clearly.
16.
Which BEST describes stages that essentially are
placed in a rectangular room with the audience on one side, facing the stage on
the other the two separated by an arch?
Correct Answer
D. Proscenium
Explanation
A proscenium stage is a type of stage that is placed in a rectangular room with the audience on one side and the stage on the other, separated by an arch. This type of stage is commonly used in traditional theater settings and allows for a clear separation between the performers and the audience. It provides a framed view of the performance and allows for elaborate set designs and backdrops to be used.
17.
The gel is made from what?
Correct Answer
B. Polycarbonate
Explanation
Polycarbonate is the material used to make the gel.
18.
The Amphi Theatre
originated in:
Correct Answer
C. Greece
Explanation
The Amphi Theatre originated in Greece. This type of theater was designed to have a semi-circular seating arrangement, with the stage located in the center. The design allowed for better acoustics and visibility, ensuring that the audience could hear and see the performances clearly. The Greeks were known for their love of drama and theater, and the Amphi Theatre was a significant development in the evolution of theatrical performances. It provided a space for large-scale productions and became an integral part of Greek culture and entertainment.
19.
Which would NOT be necessary for a technical rehearsal in the preliminary staging of a production?
Correct Answer
D. Artistic director
Explanation
The artistic director is responsible for the overall artistic vision and direction of a production. However, during a technical rehearsal, the focus is primarily on the technical aspects of the production such as lighting, sound, and set changes. The presence of an artistic director is not necessary during this stage as their role is more focused on the creative aspects of the production rather than the technical execution.
20.
Production is BEST
defined as the art of conceptualizing:
Correct Answer
B. And executing an event for the audience’s satisfaction and enjoyment
Explanation
The correct answer is "and executing an event for the audience’s satisfaction and enjoyment." This answer captures the essence of production by highlighting the importance of creating an event that caters to the audience's needs and desires. It suggests that production is not solely about personal satisfaction and enjoyment, but rather about providing a fulfilling experience for the audience.
21.
Which BEST describes the main role of the
administrative department?
Correct Answer
B. Coordinate all departments
Explanation
The main role of the administrative department is to coordinate all departments. This means that they are responsible for ensuring that all departments within the organization are working together efficiently and effectively. They act as a central point of contact and communication between different departments, ensuring that tasks and projects are coordinated and deadlines are met. By coordinating all departments, the administrative department helps to streamline operations and improve overall organizational performance.
22.
An artist who is to perform at your function
makes a complaint about the absence of a mirror in the changing room. What
action would you take if you were the stage manager?
Correct Answer
C. Identify a mirror and report the matter to the director
Explanation
If the artist complains about the absence of a mirror in the changing room, as a stage manager, the appropriate action would be to identify a mirror and report the matter to the director. This shows that the stage manager acknowledges the artist's concern and takes steps to address it by finding a solution. By reporting the matter to the director, the stage manager ensures that the issue is escalated to the appropriate authority who can make the necessary arrangements to provide a mirror for the artist.
23.
In the staging of a
production and mounting the lighting equipment where would the cyclorama be located?
Correct Answer
D. Above the front of the stage
Explanation
The cyclorama is a large, curved backdrop used in theater productions to create a seamless background. It is typically located above the front of the stage. This placement allows the cyclorama to be easily seen by the audience and provides a clear and unobstructed view of the backdrop. Placing it at the back of the stage or near the fly tower would not achieve the desired effect, as it would be difficult for the audience to see. Similarly, placing it under the trap door would not make sense, as the trap door is typically used for other purposes such as entrances and exits.
24.
State what is the lighting
rig is the:
Correct Answer
A. bar from which the lights are hung
Explanation
The lighting rig refers to the bar from which the lights are hung. This is the structure that supports and holds the lights in place, allowing them to be positioned and adjusted as needed for a specific lighting setup. The lighting rig is an essential component in creating the desired lighting design for a performance or event.
25.
The planners perspective looks at all the following in events planning EXCEPT
Correct Answer
B. pHysiological needs of the patron
Explanation
The planners perspective in event planning considers various factors such as meeting and function rooms, legal considerations, and negotiating for the facilities. However, it does not specifically focus on the physiological needs of the patron. This refers to the physical well-being and comfort of the attendees, including factors like food, beverages, seating arrangements, and accessibility. While important, this aspect is not directly related to the planners' perspective in event planning, which primarily focuses on logistics, organization, and legal aspects.
26.
All site inspectors look for the following EXCEPT
Correct Answer
C. Crime hot spots
Explanation
Site inspectors are responsible for assessing the condition and functionality of a facility. They typically focus on aspects such as the overall upkeep and appearance of the facility, staff attitude, and ease of transportation. However, crime hot spots are not typically within the scope of a site inspector's responsibilities. Therefore, they would not be looking for crime hot spots during their assessment.
27.
All the following are types of food service EXCEPT
Correct Answer
C. Italian service
Explanation
The question asks for the type of food service that is NOT included among the given options. The options provided include American service, Russian service, Italian service, and French service. Therefore, the correct answer is Italian service, as it is the only option that is not a type of food service.
28.
Another name for house left is
Correct Answer
A. Stage right
Explanation
Stage right is the correct answer because in theater, when facing the audience, the left side of the stage is referred to as stage right. This terminology is used to provide consistent directions and references for actors and stage crew members. The term "house left" is used to indicate the left side of the stage from the perspective of the audience. Therefore, "stage right" is another name for "house left" as it refers to the same location on the stage.
29.
The stage itself has been given named areas to facilitate the precise movement and positioning of actors on stage. What is the term used when positioning actors before rehearsal using a miniature stage?
Correct Answer
C. Blocking
Explanation
Blocking is the term used when positioning actors before rehearsal using a miniature stage. This process helps the director and actors plan and choreograph their movements on stage, ensuring that everyone knows where they need to be and when. By using a miniature stage, the director can visualize the blocking and make any necessary adjustments before the actual rehearsal with the full-sized set. This allows for a smoother and more efficient rehearsal process.
30.
The founder of staging in theatre production in the 19th century was
Correct Answer
A. Gilbert
Explanation
Gilbert is the correct answer because he is widely recognized as the founder of staging in theatre production in the 19th century. He introduced innovative techniques and principles that revolutionized the way plays were presented on stage. His contributions to stage design and the use of scenery, lighting, and props greatly enhanced the overall theatrical experience for audiences.
31.
If the facility has signs of untidiness this would imply all but one of the following
Correct Answer
D. Management to strict
Explanation
If the facility has signs of untidiness, it suggests that the management is not strict enough. This means that the management is not enforcing proper cleanliness and organization standards, allowing the facility to become untidy.
32.
Many evident planner make their first site inspection with little advance notice. They do this for two reasons. Identify which two reason are the most appropriate.
Correct Answer
A. To observe the property staff attitude and the type of service received by the typical guest
Explanation
The correct answer is to observe the property staff attitude and the type of service received by the typical guest. This is because conducting a site inspection with little advance notice allows planners to see how the staff interacts with guests and the level of service provided. This helps them assess the quality of the property and determine if it meets their standards for hosting events or accommodating guests.
33.
There are four major areas on a stage. What area on the stage would you put the band if you were using a thrust stage?
Correct Answer
B. Down stage
Explanation
If you were using a thrust stage, the band would be placed down stage. A thrust stage is a type of stage design where the stage extends into the audience, allowing for a more intimate and immersive experience. Placing the band down stage ensures that they are closer to the audience, creating a more engaging and interactive performance.
34.
Site inspectors must get as much information as possible about transportation facilities in the area. This should include all but one:
Correct Answer
D. Private route for patrons
Explanation
Site inspectors need to gather information about transportation facilities in the area to assess their accessibility and convenience. This includes providing road/route maps for commuters, ensuring the availability of a shuttle bus for transportation, and offering free parking at the facility. However, the provision of a private route for patrons is not necessary for site inspectors as it is specific to a certain group of individuals and does not contribute to the overall assessment of transportation facilities in the area.
35.
The meeting planner will consider ALL of the following EXCEPT.
Correct Answer
D. Shape of the room
Explanation
The meeting planner will consider the number of rooms available at the time of the event, the availability of a sound system, and the location of the room when making their decision. However, the shape of the room is not typically a factor that would be considered in the decision-making process.
36.
Who is the father of stage lighting?
Correct Answer
A. McCandless
Explanation
McCandless is considered the father of stage lighting because he revolutionized the field by introducing new techniques and equipment. He developed the concept of "lighting plots" and was the first to use color gels to create different lighting effects. His innovations greatly influenced the way stage lighting is used today and he is widely recognized as a pioneer in the industry.
37.
Stage lighting has three main functions. Identify the one that is not a function
Correct Answer
D. To provide enough lighting so that the theatre and stage is not dark
Explanation
The three main functions of stage lighting are to make the actors clearly visible, to give actors and action a dramatic appearance, and to compliment and highlight the sets and costumes. Providing enough lighting so that the theatre and stage is not dark is not a function of stage lighting, as it is a basic requirement rather than a specific function.
38.
Identify who proposed that the stage setting be broken up into a number of Acting Areas, each with two (2) fixtures. The fixtures were to be positioned overhead as front lights at approximately 90 degrees to the area. Further the fixtures were to be located approximately 45 degrees horizontally.
Correct Answer
B. McCandless
Explanation
McCandless proposed the idea of breaking up the stage setting into multiple Acting Areas, each with two fixtures positioned overhead as front lights at approximately 90 degrees to the area and located approximately 45 degrees horizontally.
39.
Altering the perception of shapes onstage, particularly three-dimensional stage elements BEST describes what:
Correct Answer
A. Revelation of form
Explanation
The phrase "altering the perception of shapes onstage" suggests that the focus is on how the shapes are revealed or presented to the audience. This indicates that the answer "revelation of form" is the best description for this concept, as it highlights the idea of unveiling or showcasing the shapes on stage. The other options, such as composition, mood, and focus, do not specifically address the aspect of altering perception or revealing form.
40.
This lantern is simply a shell holding a Par lamp, a sealed bulb with a fixed beam angle that produces a powerful narrow beam. Which lantern does this BEST describe?
Correct Answer
B. Parcan
Explanation
This question is asking for the lantern that is described as simply a shell holding a Par lamp, which is a sealed bulb with a fixed beam angle that produces a powerful narrow beam. The best lantern that fits this description is a parcan. A parcan is specifically designed to hold Par lamps and is known for producing a focused and narrow beam of light.
41.
All are types of stages EXCEPT
Correct Answer
C. Centred stage
Explanation
The question asks for the type of stage that is not included in the given options. The options provided are proscenium, theatre in the round, and thrust stage, which are all different types of stages commonly used in theater productions. However, "centred stage" is not a recognized type of stage in theater terminology, making it the correct answer.
42.
___________are pieces of stage added to the front of a proscenium stage which
protrude past the proscenium arch, pushing out into the audience in
order to make them feel more involved.
Correct Answer
B. Apron
Explanation
The correct answer is apron. The apron is a piece of stage that extends beyond the proscenium arch and into the audience, creating a closer connection between the performers and the audience. It allows the audience to feel more involved in the performance and enhances their sense of immersion. The apron is often used for intimate or interactive scenes, and it can also be used for additional staging space or to create different levels on the stage.
43.
)______________around the back of the stage, which allow cast members to walk between entrances and exits without being seen by the audience.
Correct Answer
A. Rat runs
Explanation
Rat runs are pathways behind the stage that are used by cast members to move between entrances and exits without being visible to the audience. These pathways are typically hidden from view and provide a discreet way for actors to navigate the stage during a performance.
44.
Generally speaking there are two types of Lighting Control Boards
Correct Answer
A. Manual an computer
45.
__________programmed to control a single channel (a channel is a lighting designer's numerical name for a dimmer or group of dimmers) or a group of channels.
Correct Answer
A. Sub masters
Explanation
Sub masters are programmed to control a single channel or a group of channels. They allow the lighting designer to have individual control over specific dimmers or groups of dimmers. This enables them to create more intricate and dynamic lighting effects by adjusting the intensity of specific lights or groups of lights separately.