Trivia: Saw Safety Test Quiz!
.
Questions and Answers
- 1.
Get permission from the instructor before making any ____________________ or adjustments on the saw.
Explanation
The answer "changes" is correct because it accurately completes the sentence and aligns with the context of the question. The sentence is discussing the need to obtain permission before making any modifications or adjustments on the saw, which can be referred to as changes.Rate this question:
- 2.
The band saw blade guide should be adjusted so that it is about ____________________ above the material you are going to cut.
Explanation
The band saw blade guide should be adjusted so that it is about 1/4 inch above the material you are going to cut. This distance is important because it allows for proper blade clearance and prevents the blade from binding or overheating during the cutting process. Additionally, having the blade guide set at this height ensures accurate and clean cuts, as it provides enough support and stability for the material being cut.Rate this question:
- 3.
When you switch on the saw make sure it is ____________________ properly.
Explanation
When you switch on the saw, it is important to ensure that it is tracking properly. This means that the saw blade should be aligned and running smoothly along its intended path. If the saw is not tracking properly, it could result in inaccurate cuts, increased risk of accidents, and damage to the saw blade or workpiece. Therefore, checking and adjusting the tracking of the saw is essential for safe and efficient operation.Rate this question:
- 4.
If the saw makes a ____________________ noise while it is running, turn it off immediately.
Explanation
If the saw makes a clicking noise while it is running, it is important to turn it off immediately. This is because a clicking noise could indicate a mechanical issue or a loose component within the saw, which can be dangerous if not addressed promptly. Turning off the saw will help prevent any further damage or potential accidents.Rate this question:
- 5.
Never stand on the ____________________ side of the table while operating the band saw. And don't let anyone else stand on that side while the saw is running.
Explanation
When operating a band saw, it is important to never stand on the right side of the table. This is because the right side is where the cutting blade is located, and standing there can put the operator at risk of injury. Additionally, it is important to ensure that no one else stands on the right side while the saw is running to prevent accidents and maintain a safe working environment.Rate this question:
- 6.
If the blade breaks, get out of the way ____________________.
Explanation
If the blade breaks, it is important to get out of the way immediately to avoid any potential harm or injury.Rate this question:
- 7.
Never make adjustments on the saw when it is ____________________.
Explanation
Making adjustments on a saw while it is running can be extremely dangerous. The moving parts of the saw can cause serious injury if someone's hands or tools come into contact with them. It is always important to ensure that the saw is turned off and completely stopped before making any adjustments or modifications to it. This will help prevent accidents and ensure the safety of the person using the saw.Rate this question:
- 8.
Wait for the saw to come up to ____________________ before you start the cut.
Explanation
To ensure a clean and efficient cut, it is important to wait for the saw to reach the appropriate speed before starting the cut. Starting the cut before the saw has reached the desired speed may result in an uneven or jagged cut, or even damage to the material being cut. Therefore, waiting for the saw to come up to speed is crucial for a successful and accurate cutting process.Rate this question:
- 9.
Do not ____________________ of a cut while the saw is running. Stop the saw and wait for it to come to a complete stop.
Explanation
It is important not to back out of a cut while the saw is running because it can lead to accidents or injuries. Instead, it is recommended to stop the saw and wait for it to come to a complete stop before making any adjustments or changes to the cut. This ensures safety and prevents any mishaps that may occur if the saw is still running while backing out of a cut.Rate this question:
- 10.
When cutting circles and sharp curves ____________________ cuts should be made first.
Explanation
When cutting circles and sharp curves, relief cuts should be made first. Relief cuts are small, shallow cuts made along the curve or circle to release tension and prevent the wood from splitting or chipping. By making these cuts first, it allows for easier and smoother cutting of the desired shape without damaging the material. This technique is commonly used in woodworking and other crafts that involve cutting curves and circles.Rate this question:
- 11.
Guide the material so your hands and fingers are ____________________ in the path of the cut. Keep them out of the line of the cut.
Explanation
It is important to keep your hands and fingers out of the line of the cut at all times to ensure safety. By guiding the material in a way that your hands and fingers are never in the path of the cut, you can minimize the risk of injury and accidents.Rate this question:
- 12.
Use a piece of ____________________ to remove scraps from behind the blade.
Explanation
Using a piece of wood to remove scraps from behind the blade is a safe and effective method. Wood is a non-abrasive material that will not damage the blade or cause any sparks. It can easily reach into tight spaces and remove any debris that may be stuck. Additionally, using wood as a tool minimizes the risk of injury compared to using other materials that may be sharp or abrasive.Rate this question:
- 13.
The stock should be held firmly against the ____________________ while it is being cut.
Explanation
The stock should be held firmly against the table while it is being cut. This is because the table provides a stable and secure surface for the stock to rest on, ensuring that it does not move or shift during the cutting process. Holding the stock against the table also helps to maintain accuracy and control while cutting, as it provides a solid reference point for the blade to follow.Rate this question:
- 14.
Plan the cut so you can keep your ____________________ all the way through the cut.
Explanation
To ensure a smooth and successful cut, it is important to maintain balance throughout the process. This means maintaining stability and control over the tool or object being cut, as well as maintaining a steady and consistent motion. By planning the cut in a way that prioritizes balance, the individual can minimize the risk of accidents or mistakes and achieve a clean and accurate cut.Rate this question:
- 15.
When you cut a large piece of material, ask someone to help ____________________ the stock while you guide it through the saw.
Explanation
When cutting a large piece of material, it is important to have someone support the stock while you guide it through the saw. This is necessary to ensure stability and prevent the material from falling or moving in an uncontrolled manner, which could result in inaccurate cuts or accidents. Having someone support the stock allows for better control and safety during the cutting process.Rate this question:
- 16.
You should never try to cut ____________________ stock on the saw.
Explanation
The word "cylindrical" is used to describe a shape that is round and has straight sides, like a cylinder. In the context of the question, it suggests that cutting cylindrical stock on a saw is not recommended. This could be because the shape of the stock may cause difficulties or hazards when trying to cut it, or it may not be suitable for the type of saw being used.Rate this question:
- 17.
Always turn the saw off and wait for it to come to a complete stop before you ____________________ it.
Explanation
To ensure safety, it is important to turn off the saw and wait for it to come to a complete stop before leaving it unattended. This prevents any accidental injuries or damage that could occur if the saw is left running while unattended.Rate this question:
- 18.
Adjust the spring tension on the scroll saw's ____________________ so the material is held flush against the table.
Explanation
To ensure that the material is held securely against the table while using a scroll saw, it is necessary to adjust the spring tension on the scroll saw's pressure foot. This adjustment allows for the proper amount of pressure to be applied to the material, preventing it from moving or shifting during the cutting process. By tightening or loosening the spring tension, the user can customize the pressure to suit the thickness and type of material being worked on, ensuring accurate and clean cuts.Rate this question:
- 19.
Twisting the blade or forcing the cut will ____________________ the blade.
Explanation
Twisting the blade or forcing the cut will cause the blade to break.Rate this question:
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Mar 28, 2009Quiz Created by
Twinikb
- Back Safety Quizzes
- Chemistry Safety Quizzes
- Drill Press Safety Quizzes
- Electrical Safety Quizzes
- Fire Safety Quizzes
- General Safety Quizzes
- Kitchen Safety Quizzes
- Lathe Safety Quizzes
- Office Safety Quizzes
- Online Safety Quizzes
- Patient Safety Quizzes
- Radiation Safety Quizzes
- Safe Lifting Quizzes
- Sander Safety Quizzes
- Shop Safety Quizzes
- Work Safety Quizzes
- Workplace Safety Quizzes
Back to top