Wrms Engineering Technology Lab Safety
WRMS Engineering Technology Lab Safety QuizYou must score 100% to pass this quiz. After you are finished, print a. Pdf of your results and upload to your wiki folder.
Questions and Answers
- 1.
Safety glasses must be worn in the lab, unless Silvis /Amato instructs otherwise.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement is stating that safety glasses are required to be worn in the lab, unless instructed otherwise by Silvis or Amato. This implies that Silvis and Amato have the authority to exempt individuals from wearing safety glasses if they deem it safe to do so. Therefore, the correct answer is True, indicating that safety glasses must be worn unless instructed otherwise by Silvis or Amato.Rate this question:
-
- 2.
I will not use any tool or machine before:
- A.
I have had a safety demonstration
- B.
I have passed the machine safety test with a score of 100%
- C.
I have permission
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The correct answer is "All of the above" because it states that before using any tool or machine, one must have a safety demonstration, pass the machine safety test with a score of 100%, and have permission. This means that all three conditions must be met before using any tool or machine to ensure safety and compliance with regulations.Rate this question:
-
- 3.
When do injuries have to be reported to the instructor?
- A.
As soon as they happen
- B.
At the end of class
- C.
At the end of the school day
Correct Answer
A. As soon as they happenExplanation
Injuries have to be reported to the instructor as soon as they happen because immediate action and medical attention may be required. Delaying the reporting of injuries can result in further complications or worsening of the injury. By reporting the injury promptly, the instructor can take appropriate measures to ensure the safety and well-being of the individual, provide necessary assistance, and document the incident for further investigation or insurance purposes. Reporting injuries immediately also helps in maintaining a safe and secure learning environment for everyone involved.Rate this question:
-
- 4.
How many people are allowed in a safety zone
- A.
1
- B.
2
- C.
3
- D.
4+
Correct Answer
A. 1Explanation
In a safety zone, only one person is allowed. This is to ensure that there is enough space for individuals to move freely and safely without overcrowding. Having more than one person in a safety zone could increase the risk of accidents or hinder emergency response efforts. Therefore, it is important to limit the number of people in a safety zone to maintain a secure environment.Rate this question:
-
- 5.
Talking is permitted when using a tool or machine as long as you are talking quietly.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement suggests that talking is allowed when using a tool or machine as long as it is done quietly. However, this is not true. In many situations, talking while using a tool or machine can be dangerous and distracting, leading to accidents or errors. It is important to prioritize safety and focus when operating tools and machines, which often requires minimizing distractions, including talking. Therefore, the correct answer is false.Rate this question:
-
- 6.
You do not have to check the condition of tools and machines before you use them.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
It is important to check the condition of tools and machines before using them to ensure they are safe and in proper working order. Neglecting to do so can lead to accidents, injuries, or damage to the equipment. Therefore, the statement that you do not have to check the condition of tools and machines before using them is false.Rate this question:
-
- 7.
Hand tools should be placed in:
- A.
Your front pockets
- B.
Your back pockets
- C.
Your shirt pocket
- D.
None of the above.
Correct Answer
D. None of the above.Explanation
Hand tools should not be placed in any of the mentioned pockets because it can be dangerous. Placing tools in pockets can cause injury or discomfort, and can also damage the tools themselves. It is recommended to use a tool belt or a tool bag to carry and store hand tools safely.Rate this question:
-
- 8.
Which of the following is not allowed when using tools / machines.
- A.
Socks
- B.
Shoes
- C.
Jewelry
Correct Answer
C. JewelryExplanation
When using tools or machines, it is not allowed to wear jewelry. This is because jewelry can get caught in the moving parts of the machines or tools, leading to accidents or injuries. To ensure safety, it is recommended to remove all jewelry before operating any tools or machines.Rate this question:
-
- 9.
Never leave a safety zone if a machine is still running.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Leaving a safety zone while a machine is still running can be extremely dangerous. Machines can have moving parts or be in operation, which can pose a risk of injury or accidents. Staying within the designated safety zones ensures that individuals are protected from potential hazards and allows them to react quickly in case of any emergency. Therefore, it is important to never leave a safety zone if a machine is still running.Rate this question:
-
- 10.
Who do you report tools / machines not working to:
- A.
Janitor
- B.
Principal
- C.
Silvis / Amato
Correct Answer
C. Silvis / AmatoExplanation
You report tools/machines not working to Silvis/Amato.Rate this question:
-
- 11.
Sharp tools should be carried with:
- A.
Cutting edge facing up
- B.
Cutting edge facing down
Correct Answer
B. Cutting edge facing downExplanation
Sharp tools should be carried with the cutting edge facing down to minimize the risk of injury. When the cutting edge is facing down, it is less likely to accidentally come into contact with someone or something, reducing the chances of cuts or other accidents. This position also allows for better control and visibility while carrying the tool, ensuring safer handling.Rate this question:
-
- 12.
Hot glue is safe to touch
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Hot glue is not safe to touch because it can reach high temperatures and cause burns or skin irritation. It is important to exercise caution and use protective measures, such as gloves or tools, when handling hot glue to avoid any potential harm.Rate this question:
-
- 13.
What do emergency shut off switches do?
- A.
Turn off the lights
- B.
Turn off power to machines
- C.
Signal the safety alarm
Correct Answer
B. Turn off power to machinesExplanation
Emergency shut off switches are designed to quickly and safely cut off the power supply to machines in emergency situations. This is crucial to prevent any further damage or accidents that may occur due to malfunctioning or dangerous machinery. By cutting off the power, these switches help to ensure the safety of both the operators and the surrounding environment.Rate this question:
-
- 14.
It is safe to talk and distract students when they are using tools and machines.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
It is not safe to talk and distract students when they are using tools and machines. Distractions can cause accidents and injuries as the students may lose focus and make mistakes while operating the equipment. It is important to maintain a quiet and focused environment when students are using tools and machines to ensure their safety.Rate this question:
-
- 15.
Tools can hang over the edge of a workbench.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Tools cannot hang over the edge of a workbench because it can be dangerous and may cause accidents. It is important to properly store and secure tools in a designated area to prevent them from falling and causing harm.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Mar 15, 2011Quiz Created by
Jsilvis50
Back to top