The Ultimate Quiz On Coin Collecting
Wanna know more about Coin Collecting? Take this quiz now!
- 1.
In what year were only 5 Liberty head nickels produced?
- A.
1913
- B.
1883
- C.
1912
- D.
1900
Correct Answer
A. 1913Explanation
In 1913, only 5 Liberty head nickels were produced. This makes it a significant year for collectors, as these nickels are extremely rare and valuable. The limited production was due to a change in design, with the Indian head design being introduced the following year. The scarcity of the 1913 Liberty head nickel makes it highly sought after by numismatists, further increasing its value.Rate this question:
-
- 2.
How many sides does the edge of Canada's loon dollar coin have?
- A.
11
- B.
10
- C.
8
- D.
12
Correct Answer
A. 11Explanation
The edge of Canada's loon dollar coin has 11 sides.Rate this question:
-
- 3.
Who is the man riding the horse on the Delaware state quarter?
- A.
Cesar Rodney
- B.
The Person On The Coin Is Not Indented To Represent Anyone In Particular
- C.
Thomas Payne
- D.
Paul Revere
Correct Answer
A. Cesar RodneyExplanation
Cesar Rodney is the man riding the horse on the Delaware state quarter. He was a prominent political figure in Delaware and played a crucial role in the American Revolution. Rodney is depicted on the coin to honor his contributions to the state and the nation.Rate this question:
-
- 4.
Which of the following countries did not produce a special coin in 1986 to commemorate the 100th anniversary of the automobile?
- A.
Vietnam
- B.
Germany
- C.
Cuba
- D.
Afghanistan
Correct Answer
B. GermanyExplanation
Germany is the correct answer because it did not produce a special coin in 1986 to commemorate the 100th anniversary of the automobile. This can be inferred from the question which states that one of the countries did not produce a special coin, and the other three options (Vietnam, Cuba, and Afghanistan) are not specified as not producing such a coin.Rate this question:
-
- 5.
U.S. gold coins with a "D" mint mark made before 1861 came from which mint?
- A.
Dayton, OH
- B.
Detroit, MI
- C.
Denver, CO
- D.
Dahlonega, GA
Correct Answer
D. Dahlonega, GAExplanation
The correct answer is Dahlonega, GA. The "D" mint mark on U.S. gold coins made before 1861 indicates that they were minted in Dahlonega, Georgia. Dahlonega was one of the first mints established by the U.S. government and operated from 1838 to 1861. It primarily produced gold coins due to the discovery of gold in the area during the Georgia Gold Rush. The coins minted in Dahlonega are highly sought after by collectors due to their historical significance and relative rarity.Rate this question:
-
- 6.
How many mints produced Morgan silver dollars?
- A.
4
- B.
5
- C.
2
- D.
3
Correct Answer
B. 5 -
- 7.
By what name are gold one pound coins of Great Britain commonly known?
- A.
Sovereign
- B.
Crown
- C.
King
- D.
Guilder
Correct Answer
A. SovereignExplanation
Gold one pound coins of Great Britain are commonly known as "Sovereigns". This term refers specifically to gold coins with a face value of one pound. The Sovereign is a well-known and historically significant coin in British currency, often featuring the image of the reigning monarch on the obverse side. It has been in circulation since the early 19th century and is highly regarded for its gold content and numismatic value.Rate this question:
-
- 8.
What does it mean when a coin is called a mule?
- A.
A Pattern Design That Never Made It Into Official Production
- B.
An Error In Which The Wrong Metal Is Used
- C.
An Error Created By Mismatched Dies In Which A Coin Has An Obverse And Reverse That Were Not Intended To Go Together
- D.
A Coin That Was Made Under Contract By A Foreign Mint
Correct Answer
C. An Error Created By Mismatched Dies In Which A Coin Has An Obverse And Reverse That Were Not Intended To Go TogetherExplanation
A coin is called a mule when it is an error created by mismatched dies in which a coin has an obverse and reverse that were not intended to go together. This means that the dies used to strike the coin were not properly matched, resulting in a coin with mismatched designs on the front and back. This type of error is considered rare and valuable to collectors.Rate this question:
-
- 9.
What is the definition of sterling silver?
- A.
.999 Fine
- B.
.925 Fine
- C.
.800 Fine
- D.
.900 Fine
Correct Answer
B. .925 FineExplanation
Sterling silver is defined as a type of silver alloy that contains 92.5% pure silver and 7.5% other metals, usually copper. This composition is commonly referred to as .925 fine, which indicates that the silver content is 92.5% pure. The addition of other metals gives sterling silver its strength and durability, making it suitable for various jewelry and silverware applications.Rate this question:
-
- 10.
What was the last year the U.S. had a half cent?
- A.
1826
- B.
1857
- C.
1883
- D.
The U.S. Never Had A Half Cent
Correct Answer
B. 1857Explanation
The U.S. had a half cent until 1857. This means that the U.S. used a coin worth half a cent as currency until that year.Rate this question:
-
- 11.
Who designed the Kennedy half dollar?
- A.
Obverse By Gilroy Roberts, Reverse By Frank Gasparro
- B.
Obverse By John Sinnock ,Reverse By Frank Gasparro
- C.
Both Sides By Frank Gasparro
- D.
Obverse By Frank Gasparro, Reverse By Gilroy Roberts
Correct Answer
A. Obverse By Gilroy Roberts, Reverse By Frank GasparroExplanation
Gilroy Roberts designed the obverse (front) side of the Kennedy half dollar coin, while Frank Gasparro designed the reverse (back) side.Rate this question:
-
- 12.
In what city were Canadian coins with an "H" mint mark made?
- A.
Halifax, Nova Scotia
- B.
Birmingham, England
- C.
Medicine Hat, Alberta
- D.
Hampshire, England
Correct Answer
B. Birmingham, EnglandExplanation
Canadian coins with an "H" mint mark were made in Birmingham, England. This is because the Royal Mint in Birmingham was responsible for producing coins for Canada from 1908 to 1919. The "H" mint mark indicates that the coins were minted in Birmingham, distinguishing them from coins minted in other locations. Halifax, Nova Scotia; Medicine Hat, Alberta; and Hampshire, England are not associated with the production of Canadian coins with an "H" mint mark.Rate this question:
-
- 13.
In which of the following denominations did the U.S. not produce a gold coin?
- A.
2
- B.
3
- C.
1
- D.
$2-1/2
Correct Answer
A. 2Explanation
The U.S. did not produce a gold coin in the denomination of 2.Rate this question:
-
- 14.
What was the denomination of the rare gold "stella" pattern?
- A.
1
- B.
4
- C.
2
- D.
3
Correct Answer
B. 4Explanation
The denomination of the rare gold "stella" pattern was 4.Rate this question:
-
- 15.
By what name was an early U.S. dime known?
- A.
Tenth Dollar
- B.
Ten Cent Piece
- C.
Disme
- D.
Dime
Correct Answer
C. DismeExplanation
The early U.S. dime was known by the name "Disme." This term was derived from the French word "dixieme," which means tenth. The dime was originally valued at one-tenth of a dollar, hence the name "Disme." Over time, the spelling of the word evolved to "dime," but its original meaning as one-tenth of a dollar remained the same.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 13, 2023Quiz Edited by
ProProfs Editorial Team -
Mar 16, 2015Quiz Created by
Cambronbill3
Back to top