Automobile Technical Quiz! Trivia Exam
(68).jpg "Automobile Technical Quiz! Trivia Exam - Quiz")
Do you know anything about automobile technology? Automotive technology is a program of study that focuses on the mechanics and technology of vehicles. The equipment that is inside the automobile must work together, be timed to perfection, and run like a well-oiled machine to provide high performance and safety. If you want to get your mental engine running, there's no better way than our automobile technical quiz. So, let's get started.
- 1.
Can I use one brake reservoir?
- A.
No
- B.
Yes if its dammed
- C.
Yes if its big enough that is compromises for both the volumes
- D.
None of the above
Correct Answer
B. Yes if its dammedExplanation
The correct answer is "yes if its dammed". This means that it is possible to use one brake reservoir if it is blocked or obstructed in some way. This could be done to prevent fluid from flowing freely between different brake systems or components. By blocking the reservoir, it can be used for multiple volumes or systems without compromising their functionality.Rate this question:
-
- 2.
What is the maximum temperature the catch can mountings must be able to withstand?
- A.
Boiling point of pure water at STP
- B.
Boiling point of pure water at altitude of 10,000 ft.
- C.
Boiling point of vegetable oil at STP
- D.
None of the above
Correct Answer
D. None of the above -
- 3.
Which of the following is a positive locking mechanism?
- A.
Jet nut
- B.
Thread locker
- C.
Super glue
- D.
None of the above
Correct Answer
A. Jet nutExplanation
A jet nut is a positive locking mechanism because it is designed to prevent loosening or unscrewing due to vibrations or other external forces. It has a unique design with a self-locking feature that provides a secure and reliable connection. This makes it an effective choice for applications where strong and stable fastening is required. Thread locker and super glue are not considered positive locking mechanisms as they do not have the same self-locking properties as a jet nut.Rate this question:
-
- 4.
What is the minimum distance at which the master switch be mounted if the template's middle circle center is 400mm above the ground?
- A.
300mm
- B.
500mm
- C.
320mm
- D.
None of the above
Correct Answer
C. 320mmExplanation
The minimum distance at which the master switch should be mounted is 320mm. This is determined by the height of the template's middle circle center, which is 400mm above the ground. The switch needs to be mounted at a distance that is less than or equal to the height of the circle center. Therefore, the correct answer is 320mm.Rate this question:
-
- 5.
If x is the point awarded for completion of an event without any DNF and y is the value of half the diameter of a constant turn on an autocross track then 100x -y is the maximum points awarded for endurance event find the dynamic events.
- A.
Skidpad
- B.
Acceleration
- C.
Autocross
- D.
Both a & b
- E.
All of the above
- F.
None of the above options is right
Correct Answer
D. Both a & bExplanation
The given equation 100x - y represents the maximum points awarded for an endurance event. Since the question asks for the dynamic events, the answer "both a & b" is correct. The skidpad and acceleration events are considered dynamic events in autocross, so they are included in the maximum points calculation.Rate this question:
-
- 6.
Which of the following mentioned items should be present during/pre technical inspection?
- A.
Push bar
- B.
Quick jack
- C.
All helmets
- D.
All of the above
- E.
B&c
Correct Answer
E. B&cExplanation
During/pre technical inspection, both the push bar and quick jack should be present. Additionally, all helmets should also be present. Therefore, the correct answer is "b&c" which means all of the above items should be present during/pre technical inspection.Rate this question:
-
- 7.
The tilt test signifies what amount of g- force.
- A.
2g
- B.
1.7g
- C.
1.6g
- D.
1.5g
Correct Answer
B. 1.7gExplanation
The tilt test signifies the amount of g-force experienced. In this case, the correct answer is 1.7g, indicating that the tilt test measures a force of 1.7 times the force of gravity.Rate this question:
-
- 8.
Let the number of attempts given for brake test be x, y be the maximum number of attempts for acceleration event,z is the track length for an endurance event, z-x-y =?(take magnitudes)
- A.
0
- B.
11
- C.
10
- D.
6
Correct Answer
C. 10Explanation
The equation z - x - y = ? represents the difference between the track length for an endurance event and the total number of attempts given for the brake test and acceleration event. The answer of 10 suggests that the number of attempts for the brake test and acceleration event combined is 10 less than the track length for the endurance event.Rate this question:
-
- 9.
During post-inspection, if the safety harness is found to be loose or unsafe what is the penalty for acceleration event.
- A.
.3s
- B.
1s
- C.
10s
- D.
None of the above
Correct Answer
D. None of the aboveExplanation
The given question does not provide any information about the penalty for an acceleration event when the safety harness is found to be loose or unsafe during post-inspection. Therefore, the correct answer is "none of the above" as none of the options provided specify the penalty in this scenario.Rate this question:
-
- 10.
Minimum time for the BPP should be
- A.
3min
- B.
10min
- C.
8min
- D.
None of the above
Correct Answer
D. None of the above -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 17, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 05, 2018Quiz Created by
Pravega Racing
Back to top