Wonderware Intouch Animation Properties Quiz
- 1.
Whenever we use any symbol from symbol factory, what first we have to do, to enable animation properties
- A.
Copy & paste it
- B.
To break its properties
- C.
Right click on it, select cell and click on break cell.
- D.
None of above
Correct Answer
C. Right click on it, select cell and click on break cell.Explanation
To enable animation properties for a symbol from the symbol factory, you need to right click on it, select cell, and click on break cell. This action allows you to separate the symbol from its original properties and customize its animation properties independently.Rate this question:
-
- 2.
To show vertical filling animation on any object, what we have to do?
- A.
Double click on object, select vertical from percent fill and give tag name
- B.
Right click on object and go to properties
- C.
Double click on object
- D.
None of above
Correct Answer
A. Double click on object, select vertical from percent fill and give tag nameExplanation
To show vertical filling animation on any object, we have to double click on the object, select vertical from the percent fill options, and give a tag name.Rate this question:
-
- 3.
To monitor implemented animation, what we have to open?
- A.
Development
- B.
Runtime
- C.
Both runtime and development
- D.
None
Correct Answer
B. RuntimeExplanation
To monitor implemented animation, we need to open the runtime. The runtime is the environment where the animation is executed and displayed. It allows us to see the animation as it is running and monitor its progress and behavior in real-time. Opening the runtime gives us the ability to observe and analyze the animation's performance and make any necessary adjustments or improvements.Rate this question:
-
- 4.
What filling directions available in vertical fill animation?
- A.
Up and Down
- B.
Down
- C.
Up
- D.
None
Correct Answer
A. Up and DownExplanation
The filling directions available in vertical fill animation are "Up and Down". This means that the animation will fill the vertical space from both the top and bottom directions, creating a visual effect of the content being filled up or emptied out. This option allows for a more dynamic and visually appealing animation compared to just filling from one direction (either up or down) or not filling at all.Rate this question:
-
- 5.
In Percent fill animation, in which direction we can fill the object?
- A.
Vertical
- B.
Horizontal
- C.
Diagonal
- D.
All of above
Correct Answer
D. All of aboveExplanation
In the Percent fill animation, the object can be filled in all directions, including vertical, horizontal, and diagonal. This means that the animation can be customized to fill the object in any desired direction, giving the user flexibility and creativity in their animations.Rate this question:
-
- 6.
I want to move object 0 to 60 units vertically and then above 60, it should move horizontally upto 100. what should be animation properties
- A.
In vertical Animation, 0-60 value, 0 to 60 vertical movement and in horizontal animation 61-100 value, 61-100 horizontal movement
- B.
In both vertical and horizontal 0-100 value and 0-100 movement
- C.
Apply percent fill animation with 0-100 value and 0-100 fill.
- D.
None of above
Correct Answer
A. In vertical Animation, 0-60 value, 0 to 60 vertical movement and in horizontal animation 61-100 value, 61-100 horizontal movementExplanation
The correct answer explains that for the vertical animation, the object should move from 0 to 60 units vertically. Then, for the horizontal animation, the object should move from 61 to 100 units horizontally. This means that the object will first move vertically and then horizontally, following the specified value ranges for each animation.Rate this question:
-
- 7.
What filling directions available in Horizontal fill animation?
- A.
Up
- B.
Right
- C.
Right & Left
- D.
All of above
Correct Answer
C. Right & LeftExplanation
The correct answer is "Right & Left." This means that in the horizontal fill animation, the filling direction can be from both the right and the left sides. This implies that the animation can start filling from either side and progress towards the opposite side, creating a visually appealing effect.Rate this question:
-
- 8.
In location animation, In which direction we can move object
- A.
Horizontally
- B.
Vertically
- C.
Diagonally
- D.
All of above
Correct Answer
D. All of aboveExplanation
In location animation, the object can be moved in all directions: horizontally, vertically, and diagonally. This means that the object can be moved left or right (horizontally), up or down (vertically), and in any diagonal direction. Therefore, the correct answer is "All of above."Rate this question:
-
- 9.
By using which animation, we can make object invisible?
- A.
Percent fill
- B.
Location
- C.
Visibility
- D.
Disable
Correct Answer
C. VisibilityExplanation
Visibility is the correct answer because it refers to the animation that can be used to make an object invisible. By applying the visibility animation to an object, it can be hidden from view, giving the illusion of it being invisible. This animation can be useful in various scenarios, such as creating interactive presentations or hiding certain elements in a user interface until they are needed.Rate this question:
-
- 10.
How we can change the size of object in animation?
- A.
Using percent fill animation
- B.
Using visibility animation
- C.
Using Object Size animation
- D.
All of above
Correct Answer
C. Using Object Size animationExplanation
The correct answer is using Object Size animation. This is because Object Size animation allows us to change the size of an object in an animation. Percent fill animation is used to change the fill level of an object, while visibility animation is used to control the visibility of an object. Therefore, the only option that specifically addresses changing the size of an object is Object Size animation.Rate this question:
-
- 11.
Object size animation can be used to show
- A.
Object size getting large and small
- B.
Object is coming from far
- C.
Object going away
- D.
All of above
Correct Answer
D. All of aboveExplanation
Object size animation can be used to show various scenarios such as object size getting large and small, object coming from far, and object going away. This means that the animation can be utilized to depict different aspects related to the object's size and movement, making all of the given options valid.Rate this question:
-
- 12.
While changing the height of object, what anchor we can select?
- A.
Left or Right
- B.
Left or right or center
- C.
Top or Bottom or Middle
- D.
None of above
Correct Answer
C. Top or Bottom or MiddleExplanation
When changing the height of an object, we can select the anchor point as either top, bottom, or middle. This means that we have the flexibility to adjust the height of the object by anchoring it at any of these three points. The choice of anchor point will depend on the specific requirements and design preferences for the object being modified.Rate this question:
-
- 13.
What is the shortcut key combination to change text on button
- A.
Ctrl + B
- B.
Ctrl + A
- C.
Ctrl+Alt
- D.
Ctrl + L
Correct Answer
D. Ctrl + LExplanation
The shortcut key combination Ctrl + L is used to change the text on a button. This combination is commonly used in various software applications to quickly access the label or text properties of a selected object, such as a button. By pressing Ctrl + L, users can easily modify the text on a button without the need to navigate through menus or use the mouse.Rate this question:
-
- 14.
What animation properties are available for Touch Push buttons?
- A.
Open, close, show window
- B.
Discrete value, Action, Show window, Hide Window
- C.
Digital value, Action, Show Animation, Hide Animation
- D.
None of above
Correct Answer
B. Discrete value, Action, Show window, Hide WindowExplanation
The correct answer is "Discrete value, Action, Show window, Hide Window". This answer suggests that for Touch Push buttons, the animation properties available include discrete value, action, show window, and hide window.Rate this question:
-
- 15.
In Discrete Value animation, what actions are available?
- A.
Direct & reverse
- B.
Set & reset
- C.
Toggle
- D.
All of above
Correct Answer
D. All of aboveExplanation
The correct answer is "All of above". In a Discrete Value animation, all the mentioned actions are available. The animation can be set to a direct or reverse motion, it can be set or reset to a specific value, and it can also be toggled between different states. Therefore, all the mentioned actions are possible in a Discrete Value animation.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 15, 2023Quiz Edited by
ProProfs Editorial Team -
Apr 02, 2020Quiz Created by
Milind.b
Back to top