2013 Television Repair Tips
Read Television Repair Tips Manual
- 1.
To enter service menu from the factory remote press the factory button.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The given statement is false because to enter the service menu from the factory remote, you need to press the factory button, not the false button.Rate this question:
-
- 2.
To enter the service menu with the customer remote with the unit on press power+mute+182+power.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The given statement is true. To enter the service menu with the customer remote while the unit is on, you need to press the power button, followed by the mute button, then enter the code "182", and finally press the power button again. This sequence of buttons will allow access to the service menu.Rate this question:
-
- 3.
The 2013 smart touch remote control power on button is IR activated.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The explanation for the given correct answer is that the 2013 smart touch remote control power on button is activated by infrared (IR) signals. This means that when the power on button is pressed, it sends out an IR signal which is received by the device it is controlling, allowing it to power on.Rate this question:
-
- 4.
The remote will need to be paired with the again if
- A.
Main PCB is replaced
- B.
Remote is replaced
- C.
Factory reset performed
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
The remote will need to be paired again if any of the mentioned actions are performed. When the Main PCB is replaced, the remote loses its pairing with the device and needs to be paired again. Similarly, if the remote itself is replaced, it will not be automatically paired with the device and requires pairing. Additionally, performing a factory reset on the device will also remove the pairing between the remote and the device, necessitating the need to pair them again. Therefore, all of the mentioned actions - replacing the Main PCB, replacing the remote, and performing a factory reset - will require the remote to be paired again.Rate this question:
-
- 5.
To pair the remote with the TV press and hold the pairing button for 4 seconds with the TV powered on.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
To pair the remote with the TV, you need to press and hold the pairing button for 4 seconds while the TV is powered on. This action allows the remote control to establish a connection with the TV, enabling it to control the TV's functions. Therefore, the statement "True" is correct as it accurately describes the process of pairing the remote with the TV.Rate this question:
-
- 6.
The smart hub can be reset by accessing the reset in the
- A.
Smart features menu
- B.
Network menu
- C.
System menu
- D.
Support menu
Correct Answer
A. Smart features menuExplanation
The correct answer is the "Smart features menu" because the smart hub can be reset by accessing the reset option within this menu. This menu is specifically designed to control and manage the smart features of the hub, including resetting it to its default settings. It is likely that the reset option is located within this menu to provide users with a convenient and easily accessible way to reset the smart hub when needed.Rate this question:
-
- 7.
Press mute+569+exit on remote control to test
- A.
Picture defects
- B.
Audio problems
- C.
Camera & microphone
- D.
Bluetooth
Correct Answer
C. Camera & micropHoneExplanation
Pressing mute+569+exit on the remote control is a way to test the camera and microphone. This suggests that the question is asking about how to test the camera and microphone, rather than any of the other options listed.Rate this question:
-
- 8.
The picture test on 2013 models has 3 test patterns.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement is true because it states that the picture test on 2013 models has 3 test patterns. This implies that when conducting a picture test on 2013 models, there are specifically 3 different test patterns that are used.Rate this question:
-
- 9.
To display the main board test pattern press what combination of buttons on the remote.
- A.
Mute+3+6+9+exit
- B.
Mute+1+4+7+mute
- C.
Mute+0+mute+0
- D.
Mute+4+1+9+exit
Correct Answer
B. Mute+1+4+7+muteExplanation
Pressing the combination of buttons "mute+1+4+7+mute" on the remote will display the main board test pattern.Rate this question:
-
- 10.
To show t-con test pattern press what combination of buttons on remote control.
- A.
Mute+0+mute+0
- B.
Mute+3+6+9+mute
- C.
Mute+3+6+9+exit
- D.
Mute+2+5+8+exit
Correct Answer
B. Mute+3+6+9+muteExplanation
Pressing the combination of buttons "mute+3+6+9+mute" on the remote control will show the t-con test pattern.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 18, 2023Quiz Edited by
ProProfs Editorial Team -
Oct 28, 2013Quiz Created by
CONNSSERVICE
Back to top