1.
What are the required items to complete a Site Survey successfully?
Correct Answer
D. All of The Above
Explanation
To complete a site survey successfully, several items are required. A site diagram is essential to understand the layout and structure of the site. A digital camera is necessary to capture visual documentation of the site conditions. Cat5e cable is needed for network connectivity and data transfer during the survey. Therefore, all of the above items are necessary to ensure a successful site survey.
2.
The tech must include the relative location of the TV's on the Site Diagram.
Correct Answer
A. TRUE
Explanation
Targetcast will need the relative location of the TV's. This is needed for many reasons but the 2 most important reasons is we use this data to select the TV's that a Targetcaster will be installed on prior to the Install and for post install troubleshooting.
3.
The HDMI cable is the cable that consist of the Red, Green, and Blue RCA Connector type cable
Correct Answer
B. FALSE
Explanation
This is a Component Cable
4.
The 3rd step in the Network Verification Steps for DHCP is "GO TO CONTROL PANEL"
Correct Answer
A. TRUE
Explanation
The 3rd step in the Network Verification Steps for DHCP is "GO TO CONTROL PANEL". This means that in order to verify the network settings for DHCP, one needs to navigate to the control panel of the system. This step is essential as it allows users to access and modify the DHCP settings, ensuring that the network is properly configured for DHCP functionality.
5.
The tech will use a 3G wireless card to determine if we can get a good network connection at the site.
Correct Answer
B. FALSE
Explanation
The tech will need to connect his laptop to the stores network as instructed via a Network Cable.
6.
If a tech is on site and he/she finds that all of the TV's are the same, the tech can take a picture of the front and back of only one TV?
Correct Answer
B. FALSE
Explanation
The tech will need to take a picture of the front and back of every TV.
7.
How does a tech determine what channels a TV can tune in?
Correct Answer
D. pHysically change the channels on the TV and ask the manager what channels they can tune to.
Explanation
A tech determines what channels a TV can tune in by physically changing the channels on the TV and asking the manager what channels they can tune to. This method allows the tech to directly interact with the TV's channel selection and verify the available channels with the manager's input.
8.
Which of the following is a very important item to include on the As Built(Site Diagram)
Correct Answer
E. All of The Above
Explanation
The correct answer is "All of The Above". Including the managers office on the As Built (Site Diagram) is important as it provides information about the location of the office. TV locations are important to include as they indicate where the TVs are placed in the site. The location and path of the Cat5e cable is crucial as it shows the wiring infrastructure. Lastly, including the location of all set top boxes is important to identify where the devices are installed.
9.
When testing the Network Connection at the site, which url will you need to enter for testing purposes?
Correct Answer
C. 72.32.163.73
Explanation
To test the network connection at the site, you will need to enter the IP address 72.32.163.73 for testing purposes. This is because IP addresses uniquely identify devices on a network, and entering this IP address will allow you to directly test the connection to the specific device associated with that IP address. The other options provided are either domain names or different IP addresses, which may not be relevant for testing the network connection at the site.
10.
When must the tech install a Cat5e Cable for the network connection?
Correct Answer
D. If the stores router/network equipment is not centralized to the TV's.
Explanation
The tech must install a Cat5e Cable for the network connection if the store's router/network equipment is not centralized to the TV's. This suggests that the TV's are not located in close proximity to the router/network equipment, so a cable is needed to establish a connection between them.
11.
What is the length of cable that is need for the service loop above the Managers Office/Network Equipment?
Correct Answer
C. 10'
Explanation
The length of cable needed for the service loop above the Managers Office/Network Equipment is 10'.
12.
The tech will need to install Surface Mount Jacks at both ends of the network cable?
Correct Answer
B. FALSE
Explanation
Targetcast only requires a RJ45(8 Pin) Modular plug on each end of the cable.
13.
If a tech encounters a Scientific Atlanta HD box, the tech will need to ensure that we can access the Set Up Wizard within the Set Top Box Menu.
Correct Answer
A. TRUE
Explanation
The explanation for the given correct answer is that if a tech encounters a Scientific Atlanta HD box, they will indeed need to ensure that they can access the Set Up Wizard within the Set Top Box Menu. This is because the Set Up Wizard is a crucial tool for configuring and setting up the HD box properly, ensuring that it functions correctly and provides the desired features and services to the user. Therefore, it is important for the tech to be able to access and navigate the Set Up Wizard to ensure a successful installation and setup process.
14.
What is the reason, the survey ask if you can put the TV in Video mode by pressing the TV/Video Button or by pressing the Channel Up/Down button below channel 2 or above channel 99?
Correct Answer
B. Just in case the site would happen to loose the original TV Remote(s).
Explanation
The reason the survey asks if you can put the TV in Video mode by pressing the TV/Video Button or by pressing the Channel Up/Down button below channel 2 or above channel 99 is to determine if the TV can still be operated without the original TV Remote(s) in case they are lost at the site.
15.
The tech must fill out the top portion of the survey completely without leaving any blanks.
Correct Answer
A. TRUE
Explanation
The correct answer is TRUE because the statement clearly states that the tech must fill out the top portion of the survey completely without leaving any blanks. This means that every field in the top portion of the survey must be filled out by the tech, leaving no empty spaces.
16.
The RF/Coax cable is the cable that has a screw type connector that screws onto a terminal on the TV
Correct Answer
A. TRUE
Explanation
The RF/Coax cable is commonly used to connect a television to an antenna or cable outlet. It has a screw type connector known as an F-type connector, which screws onto the terminal on the TV. This connection ensures a secure and reliable signal transmission between the TV and the source. Therefore, the statement is true.
17.
A digital photo of a hand-sketched Site Diagram is acceptable to submit for your Deliverables?
Correct Answer
B. FALSE
Explanation
Targetcast must have an As Built in Excel in case the site is remodeled or we need to update the drawing for any reason.
18.
Which selection below describes how your As-Built should be labeled?
Correct Answer
C. Briad TGIF 1234 San Ramon, CA
Explanation
The correct answer is "Briad TGIF 1234 San Ramon, CA". This answer describes how the As-Built should be labeled by including the name of the company (Briad), the specific TGIF location (1234), and the city and state where it is located (San Ramon, CA). This labeling ensures that the As-Built is properly identified and can be easily referenced in the future.
19.
If you are able to able to access the TargetCast Web server (Apache Screen) and the Installer Application, you MUST run a trace route?
Correct Answer
B. FALSE
Explanation
Targetcast will require that a tracert is run to ensure that there are no network issues along the network path.
20.
Please select the correct answer that best describes a component cable.
Correct Answer
B. It is a cable that has a Green, Blue, and Red Video RCA Connector
Explanation
A component cable is a cable that has a Green, Blue, and Red Video RCA Connector. This type of cable is commonly used to transmit high-quality video signals, such as those from DVD players or gaming consoles, to a display device. The Green, Blue, and Red connectors are used to carry the separate color components of the video signal, resulting in a clearer and more vibrant picture. The presence of these connectors indicates that the cable is specifically designed for transmitting video signals.