Two Wheel Motorcycle Examination CA 2011 N°3
- 1.
Vehicle/motorcycle collisions are most common :
- A.
At intersections
- B.
On freeways
- C.
At night
Correct Answer
A. At intersectionsExplanation
Vehicle/motorcycle collisions are most common at intersections because intersections are points where multiple vehicles are crossing paths, increasing the chances of a collision. At intersections, drivers and riders have to navigate through various traffic signals, signs, and turning movements, which can lead to confusion or misjudgment. Additionally, intersections often have heavy traffic flow, making it more challenging for drivers and riders to anticipate and react to each other's movements. Therefore, the high volume of vehicles and complex traffic patterns at intersections make them more prone to accidents involving motorcycles.Rate this question:
-
- 2.
Before changing lanes to the left :
- A.
Check your left mirror and look to the left
- B.
Check the right mirror and turn your head to the left
- C.
Use your horn and speed up
Correct Answer
A. Check your left mirror and look to the leftExplanation
Before changing lanes to the left, it is important to check the left mirror and look to the left. This is necessary to ensure that there are no vehicles or obstacles in the left lane that could potentially cause a collision. By checking the left mirror and looking to the left, the driver can assess the situation and make an informed decision about when it is safe to change lanes.Rate this question:
-
- 3.
Wich one of the following statements is correct ?
- A.
Press left, lean right, and go right
- B.
Press left, lean left, go right
- C.
Press left, lean left, go left
Correct Answer
C. Press left, lean left, go leftExplanation
The correct answer is "Press left, lean left, go left." This statement suggests that the action of pressing the left button, leaning to the left, and going in the left direction is the correct sequence of actions.Rate this question:
-
- 4.
To create more space in the situation pictured below, you should :
- A.
Pass the car on your left
- B.
Ride in the right portion of the lane
- C.
Adjust your speed and stay in the center of the lane
Correct Answer
C. Adjust your speed and stay in the center of the laneExplanation
Adjusting your speed and staying in the center of the lane allows for more space in the situation pictured below. By adjusting your speed, you can create a larger gap between yourself and the car ahead, giving you more room to maneuver if needed. Staying in the center of the lane also provides a buffer zone on both sides, reducing the risk of collisions with vehicles on either side.Rate this question:
-
- 5.
In slow, tight turns :
- A.
Lean the motorcycle only and keep your body straight
- B.
Lean your body more than the motorcycle
- C.
Do not lean
Correct Answer
A. Lean the motorcycle only and keep your body straightExplanation
In slow, tight turns, it is important to lean the motorcycle only and keep your body straight. This is because leaning the motorcycle helps to maintain balance and stability while navigating the turn, while keeping your body straight helps to maintain control and avoid any unnecessary movements that could destabilize the bike. Leaning your body more than the motorcycle or not leaning at all can both lead to loss of control and increase the risk of accidents.Rate this question:
-
- 6.
While a turn, it is best to :
- A.
Maintain a steady speed or gradually accelerate
- B.
Slow down
- C.
Accelerate and look straight ahead
Correct Answer
A. Maintain a steady speed or gradually accelerateExplanation
When making a turn, it is important to maintain a steady speed or gradually accelerate. This allows the driver to have better control over the vehicle and reduces the risk of losing control or skidding. By maintaining a steady speed, the driver can ensure a smooth and safe turn without sudden changes in momentum. Gradually accelerating can also help in maintaining stability and balance while making the turn. Slowing down or accelerating and looking straight ahead can be risky as it may lead to abrupt movements, loss of traction, or failure to anticipate any obstacles or hazards on the road.Rate this question:
-
- 7.
To make good judgments in traffic, you need to first :
- A.
Know how to stop quickly
- B.
Be able to swerve
- C.
Search ahead
Correct Answer
C. Search aheadExplanation
To make good judgments in traffic, it is important to search ahead. This means constantly scanning the road ahead for potential hazards, such as other vehicles, pedestrians, or obstacles. By doing so, you can anticipate any potential dangers and make informed decisions about how to navigate through traffic safely. This proactive approach allows you to react in a timely manner, adjust your speed, change lanes, or take any necessary actions to avoid accidents or collisions. Searching ahead is a crucial skill for maintaining situational awareness and making effective judgments while driving.Rate this question:
-
- 8.
Your motorcycle has two brakes. Use both brakes :
- A.
Only for normal stops
- B.
Only for emergency stops
- C.
Every time you slow or stop
Correct Answer
A. Only for normal stopsExplanation
Using both brakes only for normal stops means that you are not utilizing the full potential of your motorcycle's braking system. It is recommended to use both brakes every time you slow or stop, regardless of the situation. This ensures maximum control and effectiveness in stopping your motorcycle safely.Rate this question:
-
- 9.
When riding with a passenger, you should :
- A.
Start slowing sooner
- B.
Use only your front brake to slow
- C.
Start in the center portion of the lane
Correct Answer
C. Start in the center portion of the laneExplanation
When riding with a passenger, starting in the center portion of the lane is the correct answer. This is because it provides the rider with the best visibility and allows for more space to maneuver. Starting in the center also helps to balance the weight distribution with the passenger on the back, making the ride more stable. It is important to consider the passenger's comfort and safety while riding, and starting in the center portion of the lane helps achieve that.Rate this question:
-
- 10.
When swerving, it is important to :
- A.
Always brake before swerving
- B.
Swerve in the direction of the hazard
- C.
Separate braking from swerving
Correct Answer
C. Separate braking from swervingExplanation
When swerving, it is important to separate braking from swerving because braking while swerving can cause loss of control over the vehicle. By separating these actions, the driver can maintain better control and stability while avoiding the hazard. Braking before swerving allows the vehicle to slow down and reduce the risk of collision, while swerving in the direction of the hazard helps to avoid it effectively. Therefore, separating braking from swerving is the correct approach in order to ensure safety while maneuvering around a hazard.Rate this question:
-
- 11.
In the picture below, the car driver is preparing to enter the intersection. To be seen and maintain a space cushion, you should :
- A.
Slow down and move away from the vehicle after entering the intersection
- B.
Slow down and move closer to the curb so the driver can see you better
- C.
Speed up to get through the intersection quickly and then move left
Correct Answer
A. Slow down and move away from the vehicle after entering the intersectionExplanation
To be seen and maintain a space cushion, it is advisable to slow down and move away from the vehicle after entering the intersection. This is important because by slowing down, you give the driver more time to notice you, and by moving away from the vehicle, you create a space cushion that allows for better visibility and reduces the risk of a collision. Speeding up or moving closer to the curb would not be safe or effective in this situation.Rate this question:
-
- 12.
In the picture below, riders A, B and C are riding as a group. To pass, rider B should :
- A.
Complete the pass in front of rider A
- B.
Return to the lane and ride next to rider A
- C.
Return to the right portion of the lane behind rider A
Correct Answer
C. Return to the right portion of the lane behind rider AExplanation
Rider B should return to the right portion of the lane behind rider A because it is the safest and most appropriate action to take when passing in a group. This allows for proper spacing between the riders and reduces the risk of collision or interference with other riders. Riding next to rider A or completing the pass in front of rider A can be dangerous and disrupt the flow of the group.Rate this question:
-
- 13.
Following closely to a vehicle in front of you :
- A.
Protects you in heavy traffic
- B.
Helps you see hazards in the road
- C.
Is a factor in collisions caused by motorcyclists
Correct Answer
C. Is a factor in collisions caused by motorcyclistsExplanation
Following closely to a vehicle in front of you is a factor in collisions caused by motorcyclists. This is because motorcycles require more stopping distance than cars, and if a motorcyclist is tailgating another vehicle, they may not have enough time to react and stop in case of an emergency. Additionally, following too closely reduces the motorcyclist's visibility of hazards on the road, making it more likely for them to be involved in a collision.Rate this question:
-
- 14.
Alcohol enters the bloodstream and quickly reaches the brain. Wich of the following is affected first :
- A.
Speech
- B.
Balance
- C.
Judgment
Correct Answer
C. JudgmentExplanation
When alcohol enters the bloodstream, it quickly reaches the brain and affects various functions. Judgment is affected first because alcohol impairs the ability to think critically, make sound decisions, and assess situations accurately. This can lead to poor decision-making, risky behavior, and impaired judgment of one's own abilities and the consequences of their actions.Rate this question:
-
- 15.
Most collisions involve riders who :
- A.
Overbrake the rear tire
- B.
Underbrake the rear tire
- C.
Were experienced riders
Correct Answer
A. Overbrake the rear tireExplanation
The correct answer is "Overbrake the rear tire." This means that most collisions involve riders who apply too much braking force to the rear tire. This can cause the rear tire to skid or lock up, leading to a loss of control and potential collision. Overbraking the rear tire is a common mistake that inexperienced riders make, as they may not have developed the proper braking technique yet.Rate this question:
-
- 16.
Make a special point to use your mirrors when :
- A.
Riding through an intersection
- B.
Following a vehicle
- C.
Slowing or stopping
Correct Answer
C. Slowing or stoppingExplanation
When slowing or stopping, it is important to use your mirrors to check for any vehicles approaching from behind. This allows you to be aware of your surroundings and make informed decisions about when to slow down or come to a complete stop. By using your mirrors, you can ensure that it is safe to slow down or stop without causing any potential accidents or collisions with vehicles behind you.Rate this question:
-
- 17.
You plan to make a right turn after stopping at an intersection. Usually, it is best to turn from wich portion of the lane ?
- A.
The left portion
- B.
The center portion
- C.
The right portion
Correct Answer
B. The center portionExplanation
When making a right turn after stopping at an intersection, it is usually best to turn from the center portion of the lane. This allows for better visibility of oncoming traffic and pedestrians, as well as ensuring a wider turning radius. By positioning the vehicle in the center portion of the lane, it also helps to prevent cutting the corner too sharply and potentially colliding with vehicles or objects on the right side.Rate this question:
-
- 18.
Not turning off a turn signal :
- A.
Encourages other drivers to pull into your path
- B.
Keeps other drivers from seeing your brake light
- C.
Reduces your chances of a collision because other drivers stay clear
Correct Answer
A. Encourages other drivers to pull into your pathExplanation
Not turning off a turn signal encourages other drivers to pull into your path because they may assume that you are planning to change lanes or make a turn. This can be dangerous as it increases the risk of a collision or an accident. It is important to always turn off your turn signal after completing a maneuver to avoid confusion and ensure the safety of yourself and other drivers on the road.Rate this question:
-
- 19.
When the front tire goes flat while riding :
- A.
Apply the rear brake and steer to the edge of the road
- B.
Steer to the right and apply both brakes
- C.
You will not be able to control the motorcycle
Correct Answer
A. Apply the rear brake and steer to the edge of the roadExplanation
When the front tire goes flat while riding, applying the rear brake and steering to the edge of the road is the correct action to take. This is because when the front tire goes flat, it becomes difficult to steer the motorcycle. By applying the rear brake, you can slow down and maintain some control over the bike. Steering to the edge of the road helps to ensure that you are out of the way of other vehicles and can safely come to a stop.Rate this question:
-
- 20.
When you turn :
- A.
Keep your head and eyes straight to maintain balance
- B.
Look through the turn to where you want to go
- C.
Always lean at the same angle as the motorcycle
Correct Answer
B. Look through the turn to where you want to goExplanation
When turning on a motorcycle, it is important to look through the turn to where you want to go. This is because your body tends to follow the direction of your eyes. By looking in the direction you want to go, you are able to maintain balance and control while navigating the turn. This technique helps to anticipate the path ahead and allows for smoother and more precise maneuvering.Rate this question:
-
- 21.
Riding in the center portion of the lane :
- A.
Should be avoided if possible
- B.
Keeps other drivers from seeing you
- C.
Keeps others from sharing your lane
Correct Answer
C. Keeps others from sharing your laneExplanation
Riding in the center portion of the lane keeps others from sharing your lane. By positioning yourself in the middle of the lane, you create a buffer zone that prevents other vehicles from trying to squeeze into the same lane as you. This can help reduce the risk of accidents and collisions caused by other drivers encroaching on your space. Additionally, riding in the center portion of the lane allows you to have better visibility and maneuverability, making it easier to react to any potential hazards on the road.Rate this question:
-
- 22.
Wearing a helmet will :
- A.
Increase your chances of a head injury
- B.
Reduce your chances of a head injury
- C.
Neither reduce or increase your chances of a head injury
Correct Answer
B. Reduce your chances of a head injuryExplanation
Wearing a helmet will reduce your chances of a head injury. Helmets are designed to provide protection to the head in case of accidents or falls. They act as a barrier between the head and any potential impact, absorbing and distributing the force of the impact. This reduces the likelihood of a head injury by cushioning the blow and preventing direct contact between the head and any hard surface. Wearing a helmet is therefore an important safety measure to minimize the risk of head injuries.Rate this question:
-
- 23.
To reduce speed before turning :
- A.
Close the throttle and apply both brakes
- B.
Pull in the clutch and use both brakes
- C.
Apply the rear brake only
Correct Answer
A. Close the throttle and apply both brakesExplanation
To reduce speed before turning, it is important to close the throttle and apply both brakes. Closing the throttle will help in reducing the speed of the vehicle, while applying both brakes will provide additional control and help in safely slowing down before making the turn. Pulling in the clutch and using both brakes can also be effective, but it is not the most accurate answer as it does not mention closing the throttle. Applying the rear brake only is not recommended as it may cause the front wheel to lose traction and result in loss of control.Rate this question:
-
- 24.
To operate the throttle :
- A.
Start with your wrist flat
- B.
Sit forward with arms straight
- C.
Twist it forward and down for more power
Correct Answer
A. Start with your wrist flatExplanation
Starting with your wrist flat is important when operating the throttle because it allows for better control and precision. When the wrist is flat, it provides a stable base and allows for smoother movements. This is especially important when starting or accelerating as it helps to prevent jerky or sudden movements that can affect the balance and stability of the vehicle. Additionally, starting with a flat wrist helps to maintain a consistent grip on the throttle, making it easier to adjust and modulate the power output as needed.Rate this question:
-
- 25.
When carrying loads :
- A.
Keep the load low and as far forward as possible
- B.
Keep the load to the rear of the motorcycle
- C.
Fasten the load against the frame on the back of the seat
Correct Answer
A. Keep the load low and as far forward as possibleExplanation
When carrying loads on a motorcycle, it is important to keep the load low and as far forward as possible. This helps to maintain the balance and stability of the motorcycle, as having the load low and forward reduces the risk of it shifting or affecting the bike's handling. Additionally, keeping the load low and forward also minimizes the impact on the motorcycle's center of gravity, making it easier to control and maneuver the bike safely.Rate this question:
-
.jpg "To create more space in the situation pictured below, you should :")
.jpg "In the picture below, the car driver is preparing to enter the intersection. To be seen and maintain a space cushion, you should :")
.jpg "In the picture below, riders A, B and C are riding as a group. To pass, rider B should :")
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Mar 22, 2012Quiz Created by
Gensigo
Back to top